1. Producte acabatview
This manual provides essential information for the safe handling, storage, and use of EMD Millipore o-Phenylenedioxydiacetic Acid, Model 8.18303.0010. This product is supplied in a 10 g quantity and is intended for synthesis applications.
Figura 1: Example of EMD Millipore product packaging. The image displays the Millipore Sigma logo, indicating the brand and manufacturer of the chemical product.
2. Informació de seguretat
Always prioritize safety when handling chemical substances. This product is intended for laboratory use by trained professionals only. Adhere to all local and national safety regulations.
- Equips de protecció individual (EPI): Always wear appropriate PPE, including safety goggles, lab coat, and chemical-resistant gloves, when handling this product.
- Ventilació: Use in a well-ventilated area or under a fume hood to minimize exposure to vapors or dust.
- Primers auxilis: In case of contact, immediately flush affected areas with plenty of water. Seek medical attention if irritation persists or if ingested.
- Spill Response: In the event of a spill, contain the material and absorb with an inert absorbent. Dispose of contaminated material according to local regulations.
- Material Safety Data Sheet (MSDS): Consult the product's MSDS for comprehensive safety data, hazard identification, and emergency procedures.
3. Manipulació i emmagatzematge
Proper handling and storage are crucial for maintaining product integrity and ensuring safety.
- Condicions d'emmagatzematge: Store the product below +30°C (+86°F). Keep the container tightly closed in a dry, cool, and well-ventilated place.
- Container Integrity: Ensure the container is not damaged before use.
- Bulk Density: The bulk density of this product is approximately 140 kg/m³. Handle with care to avoid excessive dust generation.
- Incompatibilitats: Avoid contact with strong oxidizing agents, strong acids, and strong bases.
4. Ús
o-Phenylenedioxydiacetic acid is primarily used for synthesis applications in laboratory settings. Specific usage protocols will depend on the intended chemical reaction or process. Users should refer to established chemical synthesis methodologies and experimental procedures relevant to their specific application.
5. Especificacions del producte
Key physical and chemical properties of o-Phenylenedioxydiacetic Acid (Model 8.18303.0010):
| Propietat | Valor |
|---|---|
| Número de model de l'article | 8.18303.0010 |
| Punt de fusió | 176 - 179 °C |
| Densitat a granel | 140 kg/m³ |
| Pes de l'article | 10 grams |
| Dimensions del paquet | 4 x 2 x 2 polzades; 0.35 unces |
| ASIN | B01MZ1OF82 |
| Data de primera disponibilitat | 19 de desembre de 2016 |
6. Informació d'eliminació
Dispose of this chemical and its container in accordance with all applicable federal, state, and local environmental regulations. Do not dispose of down the drain or in general waste. Consult your institution's chemical waste management guidelines or a licensed waste disposal company.
7. Informació i assistència del fabricant
This product is manufactured by EMD Millipore Corporation.
For further technical assistance, safety data, or product support, please contact your local Millipore representative or visit the official Millipore website. Always refer to the most current product documentation and safety data sheets provided by the manufacturer.
Note: Information in this manual is subject to change without notice. Always refer to the latest product documentation.
