1. Introducció
The SFA Sanispeed+ is a high-performance wastewater lifting pump designed to evacuate wastewater from sanitary devices located below the sewer level. It is an ideal solution for installing kitchens, laundries, or bathrooms in basements or areas without direct access to gravity drainage. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Sanispeed+ pump.
Figure 1: SFA Sanispeed+ Wastewater Lifting Pump. This image shows the compact, light grey unit with its various connection points and caps on the top surface.
2. Informació de seguretat
Please read all safety instructions carefully before installing, operating, or performing maintenance on the Sanispeed+ pump. Failure to follow these instructions could result in electric shock, fire, serious injury, or property damage.
- Seguretat elèctrica: Ensure the pump is connected to a properly grounded electrical outlet. Disconnect power before any installation, maintenance, or repair work.
- Instal·lació professional: For optimal safety and to ensure warranty validity, installation by a qualified professional is highly recommended.
- Temperatura de l'aigua: The pump can handle wastewater up to 75°C intermittently. Do not exceed this temperature.
- Ventilació: Assegureu-vos que hi hagi una ventilació adequada al voltant de la bomba per evitar el sobreescalfament.
- Productes químics: Do not dispose of corrosive chemicals, solvents, or flammable liquids through the pump.
- Nens i animals de companyia: Keep children and pets away from the pump and its connections.
3. Configuració i instal·lació
The Sanispeed+ pump is designed for versatile installation in various settings, including kitchens, laundries, and bathrooms. It features four inlets for connecting multiple sanitary appliances.
3.1. Consideracions de col·locació
- Position the pump in a location that allows for easy access for maintenance and inspection.
- Ensure the pump is placed on a stable, level surface to minimize vibration and noise.
- Consider the proximity to the sanitary appliances and the main drainage system.
3.2. Connexió d'aparells
The Sanispeed+ is equipped with 4 inlets, allowing connection of various appliances such as:
- Rentaplats
- Aigüeres
- Rentadores
- Xàfecs
- Rentatasins
It is also compatible with water softeners. Ensure all connections are secure and watertight to prevent leaks.
Figure 2: Sanispeed+ installed in a kitchen. This image shows the pump discreetly placed under a stainless steel kitchen counter, connected to a sink.
Figure 3: Sanispeed+ installed in a bathroom. The pump is visible on the floor, connected to a washbasin and a shower drain, against a brick wall.
3.3. Connexió elèctrica
Connect the pump to a dedicated 230 Volt electrical circuit. Ensure the circuit is protected by a residual current device (RCD) for safety.
3.4. Dibuix Tècnic
Figure 4: Technical dimensions of the Sanispeed+ pump. This diagram provides precise measurements (in millimeters) for installation planning, showing front and side views with inlet and outlet diameters.
4. Instruccions de funcionament
The SFA Sanispeed+ pump operates automatically. When wastewater enters the unit, a pressure switch activates the pump, which then discharges the wastewater through the discharge pipe to the main drainage system.
- Activació automàtica: The pump will automatically start when the water level inside reaches a certain threshold and stop once the water is evacuated.
- Funcionament silenciós: Designed for quiet performance, the Sanispeed+ operates at a low noise level of 42 dB(A), ensuring minimal disturbance.
- Caudal alt: With a maximum flow rate of 6000 liters per hour, the pump efficiently handles high volumes of wastewater.
5. Manteniment
Regular maintenance ensures the longevity and optimal performance of your Sanispeed+ pump.
- Desconnexió d'alimentació: Always disconnect the pump from the power supply before performing any maintenance.
- Inspecció periòdica: Periodically check the pump for any signs of leaks, unusual noises, or blockages.
- Neteja: If necessary, clean the exterior of the pump with a damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Inlet/Outlet Checks: Ensure that the inlet and outlet pipes are free from debris or obstructions. The unit includes a non-return valve and active carbon filter, which should be checked periodically.
- Servei professional: For internal cleaning or complex issues, it is recommended to contact a qualified service technician.
6. Solució De Problemes
This section provides solutions to common issues you might encounter with your Sanispeed+ pump.
| Problema | Causa possible | Solució |
|---|---|---|
| La bomba no arrenca | No power supply; Clogged inlet; Faulty pressure switch. | Check power connection and circuit breaker; Clear any obstructions in the inlets; Contact a professional for switch replacement. |
| La bomba funciona contínuament | Blocked non-return valve; Faulty pressure switch; Continuous water inflow. | Check and clear non-return valve; Contact a professional for switch replacement; Identify and stop continuous water source. |
| Sorolls o vibracions inusuals | Debris in pump; Improper installation; Worn components. | Disconnect power and check for debris (professional recommended); Ensure pump is level and secure; Contact service for worn parts. |
| Fuga d'aigua | Loose connections; Damaged seals or pipes. | Check and tighten all pipe connections; Inspect seals and pipes for damage and replace if necessary. |
If the problem persists after attempting these solutions, please contact SFA customer support or a qualified technician.
7. Especificacions tècniques
| Característica | Especificació |
|---|---|
| Número de model | 6045 |
| Marca | Sfa |
| Dimensions (L x A x A) | 37.5 x 18.5 x 27.7 cm (14.76 x 7.28 x 10.9 polzades) |
| Pes | 6 quilos (13.2 lliures) |
| Voltage | 230 Volts |
| Poder | 400W |
| Caudal màxim | 6000 litres per hora |
| Alçada màxima d'elevació | 314.96 Inches (approx. 8 meters) |
| Temperatura màxima de l'aigua | 75°C (intermittently) |
| Nivell de soroll | 42 dB(A) |
| Number of Inlets | 4 |
| Material | Metall (carcassa) |
| Color | Blanc |
| Components inclosos | Non-return valve, Connectors, Active carbon filter |
| Origen | Made in France (Origine France Garantie) |
8. Garantia i Suport
The SFA Sanispeed+ pump comes with a 5 any de garantia, provided it is installed by a qualified professional. This warranty covers manufacturing defects and ensures peace of mind regarding your investment.
For technical assistance, warranty claims, or to locate an authorized service professional, please contact SFA customer support through their official weblloc web o la informació de contacte proporcionada amb la compra.
As a product benefiting from the "Origine France Garantie" label, you can be assured of its quality and manufacturing standards, produced in SFA's factory in Brégy (Oise), France.
