Producte acabatview
The Progress Lighting P500037-020 Assembly Hall Six-Light Pendant offers a formal and classic open caged design suitable for traditional and transitional interiors. This fixture features arching frames that surround a candelabra cluster with matching candles. Optional Antique Brass candle covers are included for varied aesthetic preferences. This is a Six-Light Antique Bronze Foyer Pendant.
Image: The P500037-020 Assembly Hall Six-Light Pendant, showcasing its open caged design and Antique Bronze finish.
Configuració i instal·lació
Informació important de seguretat: Installation should be performed by a qualified electrician. Ensure power is turned off at the circuit breaker before beginning installation. Follow all local electrical codes.
Components inclosos:
- Fixació penjant
- Maquinari de muntatge
- 72-inch Chain for adjustable hanging height
- Full d’instal·lació
Image: A diagram illustrating the included 72-inch chain, which allows for multiple hanging heights and accommodation of sloped ceilings.
Mounting and Dimensions:
The fixture features a protruding mounting type. The overall dimensions are approximately 32-3/4 inches in height and 20 inches in diameter. The included chain allows for customization of the hanging height to suit various ceiling heights and room layouts.
Image: A technical drawing of the pendant light, indicating its height of 32-3/4 inches and diameter of 20 inches.
Recommended Placement Guidelines:
Optimal placement ensures proper illumination and aesthetic balance within a room. Consider the following general guidelines:
- Over a Bedside Table: Hang the pendant approximately 55 to 60 inches from the floor.
- Over a Kitchen Island: Maintain 24 inches between multiple pendants. Position pendants 30 to 36 inches above the counter surface and at least 12 inches from the island edge.
- In a Stairwell: For an 18-foot ceiling, a 45-inch tall fixture with a 27-inch chain/stem is a common recommendation.
- Over a Dining Table: Hang the pendant 30 to 34 inches above the table surface. The fixture width should ideally be 32 to 48 inches, or the table width minus 12 inches.
Image: A visual guide for hanging a pendant light above a bedside table, suggesting a height of 55 to 60 inches from the floor.
Image: A diagram illustrating the recommended spacing (24 inches) between pendants and height (30-36 inches above counter) when installed over a kitchen island.
Instruccions de funcionament
Requisits de la bombeta:
This fixture requires six bulbs with an E26 (Medium Base) type. A clear filament T10 bulb shape is recommended for optimal appearance. Each bulb should not exceed 60 watts. The fixture operates on a 120-volt AC power source.
Funcionalitat d'atenuació:
This fixture is dimmable when used with compatible wall dimmers and dimmable light bulbs. Ensure both the dimmer switch and the bulbs are rated for dimming functionality.
Image: A graphic detailing bulb information (E26 base, T10 shape recommended) and confirming the fixture's dimmable capability with compatible components.
Manteniment
To maintain the appearance and functionality of your pendant light, follow these guidelines:
- Neteja: Dust the fixture regularly with a soft, dry cloth. For more thorough cleaning, lightly dampen a soft cloth with water and wipe the surfaces. Avoid using abrasive cleaners, solvents, or polishes as these can damage the finish.
- Substitució de bombetes: Always turn off the power at the circuit breaker before replacing bulbs. Allow bulbs to cool completely before handling.
Resolució de problemes
If you encounter issues with your pendant light, refer to the following common solutions:
- La llum no s'encén:
- Comproveu si l’interruptor automàtic està activat.
- Assegureu-vos que totes les connexions elèctriques siguin segures.
- Verify that the light bulbs are correctly installed and not burnt out.
- Parpelleig de llum:
- Confirm that the bulbs are fully tightened.
- If using a dimmer, ensure it is compatible with the bulbs and fixture.
- Comproveu si hi ha connexions de cablejat soltes.
If problems persist after attempting these steps, consult a qualified electrician or contact customer support.
Especificacions
| Característica | Detall |
|---|---|
| Número de model | P500037-020 |
| Color | Bronze antic |
| Material | Acer |
| Pes de l'article | 15.7 lliures |
| Nombre de peces | 1 |
| Diàmetre de l'element | 20 polzades |
| Tipus de muntatge | Sobresortint |
| Voltage | 120 Volts |
| Wattage | 60 watts (per bombeta) |
| Certificació | Llistat UL |
| Ús | Residencial |
| UPC | 785247209279 |
Informació de la garantia
This Progress Lighting P500037-020 Assembly Hall Six-Light Pendant is covered by a Garantia limitada d'1 any. For specific terms and conditions, please refer to the warranty documentation included with your product or contact Progress Lighting customer service.
Atenció al client
For further assistance, technical support, or warranty claims, please contact Progress Lighting directly. Refer to the contact information provided in your product packaging or visit the official Progress Lighting weblloc.
