Uniwatt by Stelpro Modern Convector Heater User Manual

1. Informació important de seguretat

LLEGIU TOTES LES INSTRUCCIONS ABANS D'UTILIZAR AQUEST ESCALFADOR.

Failure to follow these instructions may result in fire, electric shock, serious injury, or death.

• Protegiu la unitat amb els interruptors automàtics o fusibles adequats segons la placa d'identificació.
• Assegureu-vos que el volum de subministramenttage (volts) correspon a l'indicat a la placa d'identificació.
• Aquesta unitat ha d'estar connectada a terra. Utilitzeu només conductors de coure.
• Utilitzeu cables d'alimentació adequats per a 75 °C (167 °F).
• Apagueu la font d'alimentació de la unitat a l'interruptor/fusible abans d'instal·lar, reparar i netejar.
• Assegureu-vos que la unitat està dissenyada per a l'ús previst (si cal, consulteu el catàleg de productes o un representant).
• Capacitat de calefacció recomanada: 1.25 W/peu cúbic (0.03 m³).
• Do not install the heater directly below a wall outlet.
• No introduïu ni deixeu que entrin objectes estranys a cap obertura de ventilació o d'escapament, ja que això podria provocar una descàrrega elèctrica o incendi, o danyar l'escalfador.
• Per evitar un possible incendi, no bloquegeu de cap manera les entrades d'aire o l'escapament.
• No l’utilitzeu sobre superfícies toves, com un llit, on les obertures es poden bloquejar.
• Un escalfador té parts calentes i amb arcs o espurnes a l'interior. No l'utilitzeu en zones on s'utilitzi o emmagatzemen gasolina, pintura o vapors o líquids inflamables.

2. Producte acabatview i Característiques

The Uniwatt by Stelpro Modern Convector Heater (Model UHC1502WCW) is a surface-mounted, quiet heating solution designed for medium to large rooms. It delivers 1500W of heat on a 240V circuit or 1125W on a 208V circuit, providing consistent and efficient heating performance. This unit is proudly made in Canada.

En general view of the Uniwatt by Stelpro Modern Convector Heater.

The sleek and modern design of the heater blends seamlessly into various room decors, such as a home office.

Característiques principals:

• High-Performance Heating: Designed for medium to large rooms, delivering 1500W (240V) or 1125W (208V) for efficient heating.
• External Thermostat Control: Compatible with an external wall thermostat (sold separately) for precise temperature management.
• Funcionament silenciós: Engineered for silent performance, making it suitable for noise-sensitive environments.
• Disseny elegant i modern: Features rounded corners and a durable steel cabinet with an epoxy-polyester powdercoat for a crisp matte white finish.
• Fàcil instal·lació: Designed for surface mounting with a concealed bracket for a clean and professional appearance.
• Fabricat amb orgull al Canadà: Ensures quality and adherence to Canadian standards.

Indication of Canadian manufacturing, ensuring quality and reliability.

Interna view espectacleasing the robust heating elements designed for efficient heat transfer.

3. Configuració i instal·lació

This convector heater is designed for permanent surface mounting and requires a hardwired connection to your electrical system. Installation should be performed by a qualified electrician in accordance with local and national electrical codes.

3.1 Llista de comprovació prèvia a la instal·lació:

• Comproveu que el volum de subministramenttage coincideix amb els requisits de l'escalfador (240 V o 208 V).
• Ensure the appropriate circuit breaker or fuse is installed for the heater's wattage.
• Confirm the installation location allows for proper air circulation and is not directly below an electrical outlet.
• Gather necessary tools: screwdriver, wire strippers, drill, level, measuring tape.

3.2 Mounting the Heater:

The heater features a concealed mounting bracket for a clean installation. Refer to the dimensions image for precise measurements.

Detailed dimensions of the convector heater for accurate placement and installation.

1. Mark the desired mounting height on the wall, ensuring sufficient clearance from the floor and ceiling as per local codes.
2. Secure the concealed mounting bracket to the wall using appropriate fasteners for your wall type. Use a level to ensure it is straight.
3. Carefully lift the heater and engage it with the mounting bracket. Ensure it is securely seated.

3.3 Electrical Connection (Hardwired):

WARNING: Disconnect power at the circuit breaker before performing any electrical work.

Illustration of the hardwired connection process within a junction box.

1. Route the electrical supply wires to the heater's junction box.
2. Connect the supply wires to the heater's wires using appropriate wire connectors. Ensure proper grounding.
3. Secure all connections and close the junction box cover.
4. Un cop finalitzada la instal·lació, restableu l'alimentació a l'interruptor.

4. Instruccions de funcionament

The Uniwatt by Stelpro Convector Heater is controlled by an external wall thermostat (sold separately). This allows for precise temperature control and energy efficiency.

4.1 Engegada inicial:

1. After installation, ensure all connections are secure and power has been restored at the circuit breaker.
2. Set your external wall thermostat to the desired temperature. The heater will begin to operate when the room temperature falls below the thermostat setting.

4.2 Control de temperatura:

Adjust the external wall thermostat to your preferred comfort level. The heater will cycle on and off automatically to maintain the set temperature. Due to its convection heating method, warm air rises naturally, providing uniform heat distribution.

An external wall thermostat (sold separately) is required to control the heater's operation.

4.3 Heating Capacity Guidance:

Per determinar l'aigua adequadatage for your space, refer to the following general guidance. This chart provides an estimate; actual heating needs may vary based on insulation, windows, and climate.

Guidance chart to help determine the required heating power (watts) based on the area to be heated (square feet).

5. Manteniment

WARNING: Always disconnect power to the heater at the main circuit breaker before performing any maintenance or cleaning.

Regular maintenance ensures optimal performance and longevity of your convector heater. This heater requires minimal maintenance.

• Neteja: Netegeu periòdicament l'exterior de l'escalfador amb un drap suau i sec.amp cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.
• Eliminació de pols: Use a vacuum cleaner with a brush attachment to gently remove any dust accumulated in the air intake and exhaust grilles. Ensure the grilles are clear of obstructions for proper airflow.
• Inspecció: Annually inspect the heater for any signs of damage, loose connections, or unusual wear. If any issues are found, contact a qualified electrician or the manufacturer's support.
• Do not attempt to lubricate any part of the heater.

6. Solució De Problemes

If you experience issues with your Uniwatt by Stelpro Convector Heater, consult the following common troubleshooting steps. If the problem persists, contact customer support.

7. Especificacions

8. Garantia i Suport

8.1 Informació sobre la garantia:

This Uniwatt by Stelpro Convector Heater (Model UHC1502WCW) comes with a 2 any de garantia from the date of purchase. This warranty covers defects in material and workmanship under normal use and service.

Conserveu el vostre comprovant de compra per a reclamacions de garantia.

8.2 Atenció al client:

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Stelpro customer service:

• Telèfon: 1-844-783-5776
• Correu electrònic: info@stelpro.com
• Adreça: 1041 Rue Parent, Saint-Bruno-de-Montarville, QC J3V 6L7, Canadà

For more information, you may also visit the official Stelpro weblloc.