Introducció
This manual provides detailed instructions for the operation and maintenance of the LAUNCH Creader 8021 ABS SRS Scan Tool. Please read this manual thoroughly before operating the device to ensure proper use and to prevent damage.
Producte acabatview
The LAUNCH Creader 8021 is a professional diagnostic tool designed for automotive technicians and enthusiasts. It offers comprehensive OBD2 functions, along with advanced diagnostic capabilities for ABS (Anti-lock Braking System) and SRS (Supplemental Restraint System). Additionally, it supports various reset functions including Oil Service Light, Electronic Parking Brake (EPB), Steering Angle Sensor (SAS), and Battery Management System (BMS).
Figura 1: LAUNCH Creader 8021 Device Diagram. This image illustrates the main components of the Creader 8021, including the LCD screen, diagnostic cable, DB15 connector, and various control buttons such as I/M, Erase, DTC, ESC, Help, OK, and Selection buttons.
Característiques principals:
- ABS & SRS Diagnostics: Reads and clears DTCs, and reads data streams for Anti-lock Braking System and Supplemental Restraint System.
- Reinicialització d'oli: Reinicia la llum de servei d'oli després d'un canvi d'oli.
- Restabliment de l'EPB: Restableix el sistema de fre d'estacionament electrònic després de la substitució de les pastilles de fre.
- Restabliment de SAS: Clears faulty steering angle sensor memories and calibrates the steering angle sensor.
- Restabliment del BMS: Performs a reset on the vehicle battery to clear fault information and re-match the battery.
- Funcions OBD2 completes: Supports all 10 OBD2 test modes for comprehensive vehicle diagnostics.
- Data Recording & Review: Allows recording of real-time DTCs and data streams for later review.
- Àmplia cobertura de vehicles: Compatible with 46 vehicle brands for ABS/SRS diagnostics (2006-2016 models) and 40 car brands for Oil/EPB resets. Full OBD2 functions cover most 1996 US-Based, 2001 EU-Based, and newer vehicles.
- Suport multi-idioma: English, Spanish, French, Russian, German, Portuguese, Japanese.
Contingut del paquet
Upon opening the package, verify that all items are present and in good condition. If any items are missing or damaged, contact your vendor immediately.
Figura 2: Package Contents. The image displays the LAUNCH Creader 8021 diagnostic tool, a diagnostic cable, a USB cable for updates, a quick start guide, and a protective carrying case.
- LLANÇAMENT Unitat principal Creader 8021
- Diagnostic Cable (DB15 to OBD2)
- Cable USB (per a actualitzacions)
- Guia d'inici ràpid
- Funda protectora de transport
Configuració i ús inicial
- Encès: The Creader 8021 is powered directly from the vehicle's OBD2 port. No external power source is typically required during operation.
- Localitza el port OBD2: Identify the 16-pin Data Link Connector (DLC) in your vehicle. This port is usually located under the dashboard on the driver's side.
- Connexió al vehicle: Plug the diagnostic cable's DB15 connector into the Creader 8021 and the OBD2 connector into the vehicle's DLC. Ensure a secure connection.
- Inicialització del dispositiu: Once connected, the Creader 8021 will automatically power on and initiate communication with the vehicle. The main menu will appear on the LCD screen.
- Selecció d'idioma: If prompted, select your preferred language from the available options (English, Spanish, French, Russian, German, Portuguese, Japanese).
Figura 3: Davant i posterior Views of the Device. This image shows the front display and control buttons, along with the rear label containing serial number and input specifications.
Instruccions de funcionament
Navigate through the menus using the directional buttons and confirm selections with the "OK" button. Use the "ESC" button to return to the previous screen.
1. OBD2 Diagnostics:
This function allows access to all 10 modes of OBD2 diagnostics for engine-related issues.
- Llegir codis: Displays Diagnostic Trouble Codes (DTCs) stored in the vehicle's ECU.
- Esborra codis: Clears DTCs from the vehicle's ECU and turns off the Malfunction Indicator Lamp (MIL).
- Preparació I/M: Comprova la disponibilitat dels sistemes de monitorització d'emissions.
- Flux de dades: Mostra dades en temps real dels sensors del vehicle en format de text o gràfic.
- Congelar fotograma: Shows a snapshot of vehicle operating conditions at the time an emission-related fault occurred.
- Prova del sensor d'O2: Recupera els resultats de la prova del monitor del sensor d'O2.
- Monitorització a bord: Recupera els resultats de les proves de monitorització de diagnòstic a bord de components/sistemes específics.
- Evap System Test: Inicia una prova del sistema d'emissió evaporativa.
- Informació del vehicle: Recupera el número d'identificació del vehicle (VIN), l'ID de calibratge (CALID) i el número de verificació de calibratge (CVN).
2. ABS & SRS System Diagnostics:
Access specific diagnostic functions for the Anti-lock Braking System and Supplemental Restraint System.
- Select "ABS System" or "SRS System" from the main menu.
- Choose "Read Codes" to view system-specific DTCs.
- Choose "Erase Codes" to clear system-specific DTCs.
- Choose "Data Stream" to view real-time data from ABS/SRS sensors.
3. Reset Functions:
The Creader 8021 supports several maintenance reset functions.
- Reinicialització d'oli: Follow on-screen prompts to reset the oil service light after an oil change.
- Restabliment de l'EPB: Follow on-screen prompts to reset the Electronic Parking Brake system. This is crucial after replacing brake pads or performing maintenance on the EPB system.
- Restabliment de SAS: Follow on-screen prompts to calibrate the Steering Angle Sensor. This is often required after steering system repairs or alignment.
- Restabliment del BMS: Follow on-screen prompts to reset the Battery Management System. This is necessary when replacing the vehicle battery to ensure proper charging and monitoring.
Manteniment i Actualitzacions
Cura del dispositiu:
- Keep the device clean and dry. Avoid exposure to extreme temperatures, moisture, or direct sunlight.
- Do not use abrasive cleaners or solvents. Wipe with a soft, damp tela.
- Store the device in its protective carrying case when not in use.
Actualitzacions de programari:
The LAUNCH Creader 8021 offers free lifetime software updates via the internet. Regular updates ensure compatibility with newer vehicle models and provide enhanced features.
- Baixeu l'eina d'actualització: Visita el LLANÇAMENT oficial website and download the update tool software to your computer.
- Instal·lar programari: Install the update tool on a computer running Windows 7, 8, 10, or XP.
- Connectar el dispositiu: Connect the Creader 8021 to your computer using the provided USB cable.
- Executa l'eina d'actualització: Launch the update tool and follow the on-screen instructions to register your device and download the latest software.
- Transfer Updates: The update tool will guide you through transferring the updates to the device's TF card.
Nota: You may also remove the TF card from the device and use a card reader to update it directly on your computer, then reinsert the card into the device.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s'encén. |
|
|
| Error de comunicació amb el vehicle. |
|
|
| Els botons no responen. |
|
|
| Update process fails. |
|
|
Especificacions
| Característica | Detall |
|---|---|
| Model | Creader 8021 |
| Mostra | LCD en color d'4 polzades |
| Entrada Voltage | 9-18V DC (via OBD2) |
| Temperatura de funcionament | De 0 °C a 50 °C (32 °F a 122 °F) |
| Temperatura d'emmagatzematge | -20 °C a 70 °C (-4 °F a 158 °F) |
| Dimensions (L x A x A) | 26.16 x 19.3 x 8.38 cm (10.3 x 7.6 x 3.3 polzades) |
| Pes | 458 g (1.01 lliures) |
| Connectivitat | OBD2, Mini USB |
| Protocols compatibles | ISO9141-2, ISO14230-4, SAEJ1850, ISO15765-4 |
| Mètode d'actualització | Free internet update via USB |
Figura 4: Product Dimensions. This image provides a visual representation of the Creader 8021's physical dimensions, including its length, width, and thickness, along with the length of the diagnostic cable.
Garantia i Suport
Informació de la garantia:
The LAUNCH Creader 8021 comes with a 12 mesos de garantia des de la data de compra. Aquesta garantia cobreix defectes de fabricació i avaries en condicions d'ús normal. Conserveu el comprovant de compra per a reclamacions de garantia.
La garantia no cobreix els danys causats per mal ús, accidents, modificacions no autoritzades o manteniment inadequat.
Suport tècnic:
For technical assistance, troubleshooting, or warranty inquiries, please contact LAUNCH customer support. Refer to the official LAUNCH weblloc web per obtenir la informació de contacte més actualitzada.
Quan contactis amb el servei d'assistència, tingues a mà el número de sèrie del dispositiu i el comprovant de compra.
