1. Producte acabatview
The DJI Inspire 2.0 Quadcopter is a professional-grade aerial platform designed for high-quality video capture. This combo includes the Zenmuse X5S Camera Gimbal, a remote controller, flight battery, charger, charging hub, and pre-installed CinemaDNG and Apple ProRes license keys. It features advanced obstacle sensing, intelligent flight modes, and a robust Lightbridge transmission system for stable control and video feed.

Figure 1: DJI Inspire 2.0 Quadcopter with propellers extended.
The aircraft has a diagonal distance of 18 inches (457.20mm) (605 mm in Landing Mode, propeller excluded) and a maximum takeoff sea level of 1.55 miles (2500 m), or 3.1 miles (5000 m with specially-designed propellers). It offers a maximum flight time of approximately 27 minutes with the Zenmuse X4S camera. The Inspire 2.0 supports various flight modes including P-mode (35 deg. max tilt angle, 25 deg. with Forward Vision System enabled), A-mode (35 deg.), and S-mode (40 deg.).
2. Muntatge i muntatge
Before first use, ensure all components are present and undamaged. Charge all Intelligent Flight Batteries using the provided charging hub and power cable. The remote controller also requires charging.
2.1 Desembalatge i inspecció inicial
Carefully remove all items from the carrying case. Inspect the aircraft, remote controller, camera, and accessories for any signs of damage.
2.2 Connexió d'hèlixs
Attach the propeller pairs to the motor mounts. Ensure the propellers with silver caps are attached to motors with silver dots, and propellers with black caps are attached to motors with black dots. Twist to secure.
2.3 Installing Intelligent Flight Battery
Slide the Intelligent Flight Battery into the battery compartment on the aircraft until it clicks securely into place.

Figure 2: Battery installation on the DJI Inspire 2.0.
2.4 Attaching Zenmuse X5S Camera Gimbal
Align the gimbal with the mounting plate on the aircraft and twist to lock it into position. Ensure it is firmly attached.

Figure 3: Gimbal mounting mechanism.
2.5 Remote Controller Preparation
Extend the antennas on the remote controller. If using a mobile device for display, attach it to the remote controller's device holder and connect it via USB cable.
2.6 Unboxing Overview Vídeo
For a visual guide on unboxing and initial setup, please refer to the official video below:
Video 1: Official DJI Inspire 2 Drone Unboxing Overview. This video demonstrates the unboxing process and initial setup steps for the DJI Inspire 2.
3. Operating the DJI Inspire 2.0
The DJI Inspire 2.0 offers a variety of intelligent flight modes and advanced features to enhance your aerial operations.
3.1 Modes de vol intel·ligents
- Spotlight Pro: This powerful tracking mode allows a single pilot to capture complex, dramatic images. It uses visual-tracking algorithms to lock onto a subject during flight, regardless of the drone's direction. It features Quick Mode for immediate tracking and Composition Mode for pre-setting tracking positions.
- ActiveTrack: This mode enables the Inspire 2 to recognize and track a range of objects, including people, bikes, cars, and boats. Tracking profiles can be adjusted for greater precision based on the subject.
- TapFly: The 2-axis onboard FPV camera separates the flight view from the main camera view. Tap a point on the screen in the FPV view to set a flight route, and the Inspire 2 will automatically fly along that route, allowing the pilot to focus on gimbal movement.
- Waypoint & Point of Interest (POI): These modes allow for pre-planned flight paths and orbiting a specific point, respectively, for automated cinematic routines.
3.2 Advanced Obstacle Sensing
Forward and downward vision systems detect obstacles up to 30 meters ahead, enabling protected flight at speeds up to 34 mph. Upward-facing infrared sensors scan obstacles 16 feet above, providing additional protection in enclosed spaces. These systems are active during normal flight, Return-to-Home (RTH), and all intelligent flight modes.
3.3 DJI Lightbridge Technology
The Inspire 2 features DJI Lightbridge technology, offering an effective transmission distance of up to 4.3 miles (under ideal conditions). It delivers 1080P/720P video and the FPV view to both pilot and camera operator. Users can switch between 2.4 GHz and 5.8 GHz control frequencies to minimize interference and enhance signal stability.
4. Manteniment
Regular maintenance ensures the longevity and optimal performance of your DJI Inspire 2.0.
- Cura de la bateria: Store batteries in a cool, dry place. Avoid overcharging or fully discharging. Follow recommended charging and storage procedures.
- Inspecció de l'hèlix: Before each flight, inspect propellers for cracks, bends, or damage. Replace damaged propellers immediately.
- Neteja: Keep the aircraft and camera clean. Use a soft, dry cloth to wipe surfaces. Avoid using harsh chemicals.
- Protecció del cardan: Always use the gimbal clamp or cover when transporting the drone to prevent damage.
5. Solució De Problemes
If you encounter issues with your DJI Inspire 2.0, refer to the following common troubleshooting tips:
- Pèrdua de senyal: If the video transmission system signal is lost and Smart Return Home is enabled, the aircraft will attempt to fly home along its original route. It will switch to a straight line when it regains a signal and use the primary camera to identify obstacles.
- Inestabilitat de vol: Ensure all propellers are correctly installed and undamaged. Perform IMU and compass calibrations as instructed in the DJI GO 4 app.
- Problemes de detecció d'obstacles: Ensure vision sensors are clean and unobstructed. Avoid flying in conditions that may impair sensor performance (e.g., heavy fog, extremely dark environments).
6. Especificacions
| Característica | Detall |
|---|---|
| Marca | DJI |
| Nom del model | Inspirar 2 |
| Característica especial | Advanced Obstacle Sensing, High-Quality Video Recording, Intelligent Flight Modes, Extended Range |
| Color | Negre |
| Resolució de captura de vídeo | 4K |
| Tecnologia de connectivitat | DJI Lightbridge, Wi-Fi |
| Nivell d'habilitat | Professional |
| Pes de l'article | 7.6 lliures |
| Interval màxim | 4.3 milles |
| Material | Carbon Fiber / High-Grade Plastic |
| Format d'imatge compatible | CinemaDNG |
| Resolució de sortida de vídeo | 1920 x 1080 píxels |
| Tecnologia de sensors òptics | CMOS |
| Número de model de l'article | CP.BX.000185 |
| Dimensions del producte | 1 x 1 x 1 polzades |
7. Què hi ha a la caixa
- DJI Inspire 2 Quadcopter with CinemaDNG and Apple ProRes Licenses
- Comandament a distància (transmissor)
- 4 x Propeller Pairs
- 2 x Bateria de vol intel·ligent
- Carregador de bateria
- Narc de càrrega
- Cable d'alimentació
- Cable USB
- targeta microSD
- Placa de calibratge del sistema de visió
- 3 x Gimbal Damper
- Propeller Mounting Plates
- Maleta de transport
- 4 x Battery Insulation Sticker
- Inspire 2 CinemaDNG & Apple ProRes License Key (Pre-Installed)
- Limited 1-Year Warranty on Aircraft (Excluding Gimbal, Camera, and Battery)
- Limited 6-Month / 200-Cycle Warranty on Battery (Whichever Comes First)
8. Garantia i Suport
The DJI Inspire 2.0 Quadcopter Combo comes with a limited 1-year warranty on the aircraft (excluding gimbal, camera, and battery) and a limited 6-month / 200-cycle warranty on the battery (whichever comes first). For detailed warranty information or technical support, please refer to the official DJI weblloc web o contacteu directament amb el servei d'atenció al client de DJI.





