Shark NV586 Navigator Powered Lift-Away Upright Vacuum Instruction Manual

Introducció

Thank you for choosing the Shark NV586 Navigator Powered Lift-Away Upright Vacuum. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new vacuum cleaner. Please read all instructions carefully before use and retain this manual for future reference.

Image: The Shark NV586 Navigator Powered Lift-Away Upright Vacuum shown with its main unit and included accessories.

Components inclosos

Your Shark NV586 vacuum includes the following components:

• Main Vacuum Unit (Upright)
• Powered Lift-Away Canister
• Motorized Floor Nozzle with LED Headlights
• Handle with Suction Control
• Vareta d’extensió
• Mànega
• Eina per esquerdes
• Eina de tapisseria
• Filtre HEPA
• Foam Filters

Imatge: Primer pla view of the Duster Crevice Tool and Upholstery Tool, which are included accessories for specialized cleaning tasks.

Muntatge i muntatge

Follow these steps to assemble your Shark NV586 vacuum:

1. Insert the motorized floor nozzle into the main vacuum body until it clicks securely.
2. Place the Powered Lift-Away canister onto the floor nozzle post.
3. Insert the extension wand into the top of the canister until it clicks.
4. Attach the handle to the top of the extension wand.
5. Connect the hose to the back of the canister and secure any clips.
6. Store the crevice tool and upholstery tool on the onboard accessory holders.

Instruccions de funcionament

Power and Surface Settings

The power switch is located on the main unit. Select the appropriate setting for your cleaning needs:

• 0: desactivat - Turns the vacuum off.
• I: Hard Floor - Provides suction for bare floors without brushroll rotation.
• II: Carpet (Brushroll On) - Activates the brushroll for deep cleaning carpets and rugs.

Adjust the suction control on the handle from minimum to maximum depending on the surface and debris type.

Image: A woman operating the Shark NV586 vacuum on a carpeted floor, demonstrating its powerful suction for deep cleaning.

Powered Lift-Away Mode

To clean hard-to-reach areas, stairs, or above-floor surfaces, detach the canister from the floor nozzle:

1. Press the 'Lift-Away' button on the canister.
2. Lift the canister away from the floor nozzle.
3. Attach the desired accessory (crevice tool, upholstery tool) to the end of the hose or extension wand.
4. Use the portable canister to clean elevated surfaces, upholstery, or tight spaces.

Image: A woman demonstrating the Lift-Away feature, detaching the canister to easily clean under low-lying furniture.

Image: The vacuum in Lift-Away mode, with the wand extended to clean high areas like curtains or ceiling corners.

Ús d'arxius adjunts

The included accessories enhance the versatility of your vacuum:

• Eina per esquerdes: Ideal for cleaning in tight spaces, corners, and along edges.
• Eina de tapisseria: Designed to pick up pet hair and lint from upholstery, stairs, and other fabric surfaces.

Image: A woman using the upholstery tool attachment in Lift-Away mode to effectively remove pet hair from a sofa.

Vídeos oficials de productes

Manteniment

Buidant el got de pols

Empty the dust cup after each use or when debris reaches the MAX FILL line. To empty:

1. Press the 'Dust Cup Release' button and lift the dust cup off the canister.
2. Hold the dust cup over a trash bin and press the bottom release latch to open the bottom flap.
3. Close the bottom flap until it clicks securely.

Image: A man demonstrating how to easily empty the removable dust cup, releasing collected debris into a trash bin.

Neteja de filtres

Regularly clean the filters to maintain optimal suction power. Rinse filters with cold water only and allow them to air dry completely for at least 24 hours before reinstalling.

• Foam Filters: Located at the top of the dust cup. Rinse every 3 months.
• Filtre HEPA: Located at the bottom of the canister. Rinse once a year.

Manteniment de pinzells

The brushroll is designed to be self-cleaning, minimizing hair wrap. Periodically check the brushroll for any remaining debris or tangled hair and remove as necessary.

Resolució de problemes

• L'aspiradora no recull les deixalles: Check if the dust cup is full and empty it. Ensure filters are clean and properly installed. Check for blockages in the hose, nozzle, or attachments.
• Brushroll not spinning: Ensure the vacuum is in 'Carpet' mode (setting II). Check for obstructions in the brushroll area and remove them.
• Vacuum tipping over in Lift-Away mode: Ensure the canister is placed on a stable, flat surface when using the hose and attachments.
• Loud noise: Check for any blockages in the air pathways or brushroll that might be causing increased noise.

Especificacions

• Nom del model: NV586
• Marca: Tauró
• Dimensions: 13.3 cm de llargada x 12.7 cm d'amplada x 30.3 cm d'alçada
• Pes de l'article: 18.31 lliures
• Font d'alimentació: Elèctric amb cable
• Potència del motor: 1.53 cavalls de potència
• Capacitat: 2.8 Quarts (Dust Cup)
• Tipus de filtre: Foam, HEPA
• Característiques especials: Bagless, Portable (Lift-Away), Swivel Steering, LED Headlights, Anti-Allergen Complete Seal
• Nivell de soroll: 80 decibels
• UPC: 622356544566

Image: An infographic detailing the key features of the Shark Powered Lift-Away Vacuum, including powerful suction, XL dust cup capacity, Anti-Allergen Complete Seal Technology, Lift-Away Technology, Swivel Steering, and LED Headlights.

Garantia i Suport

This product comes with a 90-day limited warranty. For warranty claims, technical support, or replacement parts, please contact Shark customer service. Refer to the product packaging or Shark's official weblloc web per obtenir la informació de contacte més actualitzada.