MSR TrailShot Water Filter Instruction Manual

1. Introducció

The MSR TrailShot Water Filter is a compact and lightweight solution for obtaining clean drinking water in the outdoors. Designed for adventurers, it provides effective filtration against common waterborne pathogens, ensuring peace of mind during your travels and activities.

Característiques principals:

• Pocket-sized and ultralight (5 ounces) for easy portability.
• Filters 1 liter per minute with easy one-handed operation.
• Effective against bacteria (99.9999%), protozoa (99.9%), and particulate matter.
• Hollow fiber technology meets U.S. EPA drinking water standards.
• Filters up to 2,000 liters without the need for iodine, chlorine, or other chemicals.

Figure 1: MSR TrailShot Ultralight Backpacking and Camping Squeeze Water Filter.

2. Informació de seguretat

Important: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning). Always handle the filter with clean hands and follow all cleaning instructions.

The MSR TrailShot filter is designed to remove bacteria, protozoa, and particulate matter from water. It is no designed to remove viruses, chemicals, heavy metals, or dissolved solids. Do not use this filter with chemically contaminated water or saltwater.

Always ensure the water source is as clear as possible to prolong filter life and maintain flow rate. Avoid highly turbid water if possible.

3. Components

The MSR TrailShot water filter consists of the following main components:

• Filter Body: The main housing containing the hollow fiber filter cartridge.
• Drink Spout: The outlet for filtered water, with a protective cap.
• Intake Hose: A flexible tube that draws water from the source.
• Prefiltre: Located at the end of the intake hose, designed to remove larger debris before water enters the hose.

Figure 2: Main components of the MSR TrailShot filter, including the filter body, drink spout, intake hose, and pre-filter.

4. Configuració

Before first use, or after prolonged storage, it is recommended to flush the filter with clean water to remove any manufacturing residues and prepare it for use.

1. Desempaquetar tots els components.
2. Ensure the intake hose is securely connected to the filter body.
3. Ensure the drink spout cap is securely attached but can be easily opened for drinking.

Figure 3: The MSR TrailShot filter assembled and ready for use, showing the attached strap for compact storage.

5. Instruccions de funcionament

The MSR TrailShot offers versatile options for accessing clean water:

5.1. Drinking Directly from Source

1. Submerge the pre-filter end of the intake hose into the water source.
2. Open the drink spout cap.
3. Squeeze the filter body repeatedly to pump water through the filter and directly into your mouth.

Figure 4: Direct drinking from the MSR TrailShot, allowing access to water without needing to lie down.

5.2. Filling a Container

1. Submerge the pre-filter end of the intake hose into the water source.
2. Position the drink spout over the opening of your water bottle, hydration reservoir, or other container.
3. Squeeze the filter body repeatedly to pump water into your container. The filter can process approximately 1 liter per minute.

Figure 5: Using the MSR TrailShot to fill a water bottle from a natural water source.

6. Manteniment

Regular maintenance is crucial for optimal performance and longevity of your MSR TrailShot filter.

6.1. Field Cleaning (Backflushing)

To restore flow rate in the field, perform a backflush:

1. Remove the intake hose from the filter body.
2. Fill the filter body with clean water (filtered water is ideal).
3. Close the drink spout cap.
4. Shake the filter vigorously.
5. Open the drink spout cap and squeeze the filter body to force water back through the filter, expelling trapped contaminants. Repeat as needed until flow improves.

6.2. Emmagatzematge a llarg termini

For long-term storage, ensure the filter is thoroughly cleaned and completely dry to prevent mold or bacterial growth. Follow the field cleaning steps, then allow all components to air dry completely before reassembling and storing in a cool, dry place.

7. Solució De Problemes

Slow Flow Rate: If the flow rate significantly decreases, it indicates that the filter is becoming clogged with particulate matter. Perform a backflush as described in the Maintenance section (6.1). If the issue persists, repeat the backflush or consider a more thorough cleaning if possible.

Sense flux d'aigua: Check if the intake hose is kinked or blocked. Ensure the pre-filter is not completely submerged in mud or heavy sediment. If the filter has been frozen, it may be permanently damaged and should be replaced.

Gust/olor de l'aigua: The TrailShot is designed to remove physical contaminants. If water still has an undesirable taste or odor, it may be due to dissolved chemicals or minerals that the filter is not designed to remove. Seek an alternative water source.

8. Especificacions

9. Garantia i Suport

Warranty information for the MSR TrailShot Water Filter is typically provided with the product at the time of purchase. Please refer to the documentation included in your product packaging for specific warranty terms and conditions.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact MSR customer service. You can find more information and contact details on the official MSR weblloc web o a través de la botiga de la seva marca: MSR Brand Store.