Introducció
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Yale D212 200 Series Deadbolt. Please read these instructions carefully before beginning installation or use to ensure proper function and security.
Característiques del producte
- ANSI/BHMA A156.5 Grade 2 Certified: Ensures high performance and durability.
- Solid Steel Deadbolt: Features a 1" (25mm) throw for enhanced security.
- Hardened, Free Spinning, Steel Pin Insert: Provides resistance against sawing.
- UL-cUL Listed: Approved for use on fire doors with a rating up to and including 3 hours.
- Non-Handed, Field Reversible: Allows for flexible installation on left or right-handed doors.
- Yale Para Keyway: Standard keyway for reliable operation.
- Cylinder by Thumbturn: Keyed exterior with an interior thumbturn for convenient locking and unlocking.
Configuració i instal·lació
Proper installation is crucial for the security and functionality of your deadbolt. If you are unsure about any step, it is recommended to consult a qualified locksmith or professional installer.
- Prepara la porta: Ensure the door is properly bored for a deadbolt, including the cross bore and edge bore. The backset (distance from the door edge to the center of the cross bore) should be 2 3/4 inches.
- Instal·leu el forrellat: Insert the latch bolt into the edge bore of the door. Ensure the bevel of the latch bolt faces the door frame. Secure it with screws.
- Instal·leu el cilindre exterior: Place the exterior cylinder assembly through the cross bore from the outside of the door. Ensure the tailpiece aligns with the slot in the latch bolt.
- Install the Interior Thumbturn Assembly: Position the interior thumbturn assembly over the tailpiece and secure it to the exterior cylinder using the provided mounting screws.
- Prova de funcionament: With the door open, test the deadbolt's operation using both the key from the exterior and the thumbturn from the interior. The bolt should extend and retract smoothly.
- Instal·leu la placa de tancament: Mark and chisel out the door frame for the strike plate, ensuring the deadbolt extends fully into the frame. Secure the strike plate with screws.
Imatge 1: Acabatview of the Yale D212 200 Series Deadbolt components, featuring the satin chrome finish. This image displays the exterior key cylinder, the interior thumbturn, and the robust latch bolt mechanism, illustrating the primary parts involved in installation.
Instruccions de funcionament
The Yale D212 200 Series Deadbolt is designed for straightforward operation.
- Per tancar des de l'exterior: Insert the correct key into the exterior cylinder and turn it clockwise until the deadbolt fully extends into the door frame. Remove the key.
- Per desbloquejar des de l'exterior: Insert the correct key into the exterior cylinder and turn it counter-clockwise until the deadbolt fully retracts. Remove the key.
- Per tancar des de l'interior: Rotate the thumbturn on the interior assembly clockwise until the deadbolt fully extends into the door frame.
- Per desbloquejar des de l'interior: Rotate the thumbturn on the interior assembly counter-clockwise until the deadbolt fully retracts.
Manteniment
Regular maintenance helps ensure the longevity and smooth operation of your deadbolt.
- Neteja: Netegeu les superfícies exteriors amb un drap suau iamp cloth. Avoid abrasive cleaners or solvents, which can damage the finish.
- Lubricació: Periodically (e.g., once a year), apply a small amount of graphite-based lubricant or a silicone-based dry lubricant into the keyway and the latch bolt mechanism. Do not use oil-based lubricants as they can attract dirt and dust.
- Comproveu els cargols: Occasionally check and tighten any loose mounting screws to maintain stability and security.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La clau és difícil d'inserir o girar. |
|
|
| Deadbolt does not extend or retract smoothly. |
|
|
| Deadbolt rattles or feels loose. |
|
|
Especificacions
| Marca | Yale |
| Número de model | D212 200 Series (Item Model Number: 085133) |
| Tipus de bloqueig | Deadbolt, Cylinder by Thumbturn |
| Claveta | Para Keyway |
| Enrere | 2 3/4 polzades |
| Material | Alloy Steel, Hardened Steel, Zinc |
| Acabar | Crom setinat |
| Certificació | ANSI/BHMA A156.5 Grade 2, UL-cUL Listed for 3-hour fire doors |
| Usos recomanats | Residential and Commercial Buildings, Fire Doors |
| Dimensions del paquet | 4.3 x 4 x 2.9 polzades |
| Pes | 1.65 lliures |
| Fabricant | ASSA ABLOY |
Garantia i Suport
For specific warranty information, please refer to the documentation included with your product or visit the official Yale website. For technical support, replacement parts, or further assistance, please contact Yale customer service or the manufacturer, ASSA ABLOY.
Sovint podeu trobar les dades de contacte d'assistència a la pàgina oficial del fabricant weblloc web o a través del vostre punt de compra.
