Taymor Duke Passage Lever 32-7910 Instruction Manual

1. Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Taymor Duke Passage Lever, model 32-7910. This passage lever is designed for doors that do not require a locking mechanism, such as closet doors or hallway doors. It features a Grade 2 heavy-duty cylindrical design and is finished in satin chrome.

2. Informació de seguretat

• Always read and understand all instructions before beginning installation.
• Wear appropriate safety gear, such as safety glasses, during installation.
• Exercise caution when using power tools.
• Mantingueu les peces petites allunyades dels nens.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• Duke Passage Lever Assemblies (2)
• Forrellat
• Placa de vaga
• Cargols de muntatge
• Thru-bolt Anti-sag Kit

This image displays the Taymor Duke Passage Lever, model 32-7910, featuring a sleek design with a satin chrome finish. The lever is shown from a slight angle, highlighting its ergonomic shape and the escutcheon plate.

4. Eines necessàries

• Tornavís Phillips
• Cinta mètrica
• Llapis
• Drill (optional, for new installations)
• Wood Chisel (optional, for new installations)

5. Configuració i instal·lació

5.1 Prepareu la porta

1. Ensure the door has standard bore holes (typically 2-1/8 inches for the lever and 1 inch for the latch bolt).
2. Mark the center of the door edge for the latch bolt.

5.2 Install the Latch Bolt

1. Insert the latch bolt into the hole on the door edge, ensuring the bevel faces the door frame.
2. Secure the latch bolt with the provided screws.

5.3 Install the Lever Assemblies

1. Align the spindle of one lever assembly with the latch bolt mechanism.
2. Place the other lever assembly on the opposite side of the door, ensuring the thru-bolt anti-sag kit components align.
3. Secure both lever assemblies using the mounting screws, tightening them evenly to prevent misalignment.

5.4 Instal·leu la placa de tancament

1. Align the strike plate with the latch bolt on the door frame.
2. Mark and chisel out a shallow recess for the strike plate if necessary.
3. Secure the strike plate with the provided screws.

5.5 Test Operation

Open and close the door several times, operating the lever to ensure smooth and proper function. The latch bolt should retract and extend without binding.

6. Instruccions de funcionament

The Taymor Duke Passage Lever is designed for simple operation. To open the door, depress the lever handle downwards. The latch bolt will retract, allowing the door to open. Release the lever, and the latch bolt will extend, securing the door in the closed position. This lever does not include a locking mechanism.

7. Manteniment

• Neteja: Netegeu la palanca amb un drap suauamp drap. Eviteu netejadors abrasius, dissolvents o productes químics agressius, ja que poden danyar l'acabat.
• Lubricació: Periodically, a small amount of silicone-based lubricant can be applied to the latch bolt mechanism to ensure smooth operation. Do not use oil-based lubricants.
• Apretament: Check mounting screws periodically and tighten if necessary to prevent looseness.

8. Solució De Problemes

• Lever is loose: Check and tighten the mounting screws. Ensure the thru-bolt anti-sag kit is properly installed.
• Latch bolt does not retract smoothly: Ensure the latch bolt is installed correctly and not binding. Apply a small amount of silicone lubricant if needed. Check for obstructions in the door frame or strike plate.
• La porta no tanca correctament: Verify the strike plate is correctly aligned with the latch bolt. Adjust the strike plate position if necessary.

9. Especificacions

10. Garantia i Suport

Taymor products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty details, product support, or to inquire about replacement parts, please contact Taymor customer service directly. Contact information can typically be found on the official Taymor weblloc o embalatge del producte.