MantelMount MM700 Premier Fireplace TV Mount User Manual

1. Introducció

The MantelMount MM700 Premier Fireplace TV Mount is designed to enhance your home entertainment experience by allowing full-range motion for your television, including vertical travel, swivel, and tilt. This mount combines high-grade construction with patented features to provide optimal viewing angles and comfort, especially when mounting a TV above a fireplace.

It is engineered with automotive gas pistons and lightweight alloys, ensuring smooth and easy adjustment of large flat-screen TVs. The MM700 is suitable for TVs weighing between 30 to 115 lbs and screen sizes from 45" to 90".

2. Informació de seguretat

WARNING: Failure to read and follow these instructions can result in serious personal injury, property damage, or voiding of your warranty. If you have any questions, contact MantelMount customer support.

• Assegureu-vos que la superfície de muntatge pugui suportar amb seguretat el pes combinat del suport i del televisor.
• Always locate wall studs or suitable structural supports before drilling.
• Do not exceed the maximum weight capacity of 115 lbs (including soundbar).
• Do not exceed the recommended TV size range of 45" to 90".
• Feu servir l'equip de seguretat adequat durant la instal·lació, inclosa la protecció ocular.
• The mount is UL Listed, indicating it meets specific safety standards.
• Be aware of the Heat Sensor Handles, which indicate if the area above the fireplace is too hot for the TV.

3. Abans de la instal·lació

Proper preparation is crucial for a successful and safe installation. Carefully review the following criteria before beginning.

3.1 Verify TV and Mount Space Criteria

Confirm your television and installation area meet the specified requirements:

• Mida de la pantalla: 45" to 90" (Diagonally)
• Capacitat de pes: 30 to 115 lbs (including soundbar)
• Compatibilitat amb VESA: Up to 600mm x 600mm
• Profunditat de la manta: 15" Maximum
• Wood Studs for Mounting: Studs Maximum 28" Apart, Wall Covering Maximum 5/8"

Image: Pre-installation checklist for TV and wall compatibility.

3.2 Verify MantelMount Fit in Wall Space

Measure your wall space and TV dimensions to ensure the mount will fit correctly. Refer to the detailed instructions in the official user manual (link provided in the support section) for specific calculations regarding wall space height, TV height, mantel depth, and required vertical space.

4. Configuració i instal·lació

Installation of the MantelMount MM700 requires careful attention to detail. It is recommended that two people perform the installation due to the weight and size of the components and the television.

4.1 Components anteriorsview

Familiarize yourself with the main components of the MM700 mount:

Imatge: Explosió view of the MM700 Premier Pull Down TV Mount highlighting key features.

• Main Wall Plate Assembly
• Pull-Down Arm Assembly with Gas Pistons
• TV Brackets (Vertical Rails)
• Soundbar Attachment (Optional)
• Paintable Wall Covers
• Hardware Kit (various screws, washers, spacers, lag bolts)

4.2 Eines necessàries (no incloses)

• Cercador de perns
• Drill with appropriate drill bits (wood and masonry, if applicable)
• Nivell
• Cinta mètrica
• Conjunt de claus d'endoll
• Tornavís Phillips
• Llapis

4.3 Passos d'instal·lació (resum)

This is a summary. Refer to the full PDF manual for detailed, step-by-step instructions and diagrams.

1. Locate Studs and Mark Mounting Position: Use a stud finder to accurately locate the center of your wall studs. Mark the desired mounting height for the wall plate.
2. Fixeu la placa de paret: Secure the main wall plate assembly to the wall using the provided lag bolts, ensuring it is level and firmly anchored into the studs.
3. Assemble Pull-Down Arm: Attach the pull-down arm assembly to the wall plate.
4. Fixeu els suports de TV al televisor: Secure the vertical TV brackets to the back of your television using the appropriate VESA screws and spacers from the hardware kit.
5. Penjar el televisor al suport: Carefully lift the television and hook the TV brackets onto the pull-down arm assembly. Secure the TV with the safety screws.
6. Adjust Gas Piston Tension: Adjust the tension of the gas pistons to match the weight of your television. This ensures smooth and stable movement.
7. Install Soundbar Attachment (Optional): If using, attach your soundbar to the dedicated soundbar attachment on the mount.
8. Gestió de cables: Route all cables neatly using the integrated cable management features to prevent pinching or damage.
9. Install Paintable Covers: Attach the decorative paintable covers over the wall plate for a finished appearance.

Image: Assembled MantelMount MM700, showing the wall plate, articulating arm, and TV mounting brackets.

5. Instruccions de funcionament

The MantelMount MM700 is designed for smooth and easy operation. Always use the integrated pull-down handles for safe movement.

5.1 Pulling Down and Raising the TV

• To pull the TV down: Grasp the heat-sensing pull-down handles firmly. Gently pull the TV downwards and outwards from the wall. The gas pistons will assist in the movement, allowing for smooth vertical travel of up to 26 inches.
• To raise the TV: Gently push the TV upwards. The gas pistons will assist in returning the TV to its retracted position above the fireplace. Ensure it clicks securely into place.

Image: User demonstrating the pull-down motion of the MantelMount MM700.

5.2 Swivel and Tilt Adjustment

• Girar: Once the TV is pulled down, you can swivel it left or right up to 30 degrees in each direction, or 60 degrees in one direction, to achieve your desired viewangle de ing.
• Inclinació: The mount allows for a downward tilt of up to 9 degrees, which can help reduce glare and improve viewcomoditat.

Image: Demonstration of the MM700's vertical travel and swivel capabilities.

5.3 Patented Features

• Heat Sensor Handles: These handles change color if the temperature above the fireplace exceeds a safe limit for your TV.
• TV Auto-Straightening: Ensures the TV returns to a perfectly level position when retracted.
• Gas Piston Auto-Stabilization: Provides smooth and controlled movement throughout the range of motion.
• Adjustable Stops: Allows you to set limits for the downward travel of the TV.

Imatge: Més deview of revolutionary features and specifications of MantelMount TV mounts.

6. Manteniment

The MantelMount MM700 is designed for durability and requires minimal maintenance.

• Neteja: Wipe the mount surfaces with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Inspecció periòdica: Periodically check all bolts and connections to ensure they remain tight. Do not overtighten.
• Gas Piston Functionality: The gas pistons are designed for long-term performance. If you notice a significant change in the smoothness or resistance of the movement, consult the troubleshooting section or contact customer support.

7. Solució De Problemes

If you encounter issues with your MantelMount MM700, refer to the common problems and solutions below.

7.1 TV Does Not Stay Down or is Difficult to Pull Down

This typically indicates that the gas piston tension needs adjustment. The tension must be calibrated to the exact weight of your television.

• Solució: Refer to the "Adjust Gas Piston Tension" section in the full user manual for detailed instructions on how to properly adjust the tension using the provided tools. This often involves turning a bolt to increase or decrease resistance.

7.2 TV Wobbles When Moving

While some minor movement is normal during articulation, excessive wobbling may indicate loose connections or improper installation.

• Solució: Re-check all mounting bolts on the wall plate and the TV brackets. Ensure they are securely tightened. Verify that the wall studs provide adequate support.

7.3 Heat Sensor Handles Change Color

The heat sensor handles are a safety feature designed to warn you if the temperature above the fireplace is too high for your television.

• Solució: If the handles indicate excessive heat, avoid leaving the TV in the retracted position for extended periods while the fireplace is in use. Consider increasing ventilation or reducing fireplace usage if this is a persistent issue.

For issues not covered here, please contact MantelMount customer support.

8. Especificacions

9. Garantia i Suport

9.1 Informació de la garantia

The MantelMount MM700 Premier Fireplace TV Mount comes with a Garantia limitada de per vidaAquesta garantia cobreix els defectes de materials i de fabricació en condicions d'ús normal. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.

For full details on the warranty terms and conditions, please refer to the official MantelMount weblloc o contacteu amb el servei d'atenció al client.

9.2 Atenció al client

If you require assistance with installation, operation, troubleshooting, or warranty claims, please contact MantelMount customer support.

• Manual d'usuari oficial (PDF): For detailed installation instructions and diagrams, you can download the official user manual aquí.
• Fabricant: MantelMount
• Weblloc: Visita el MantelMount Store on Amazon per a més informació i opcions de contacte.