Introducció
The JETBeam SF-R26 is a high-performance, rechargeable LED flashlight designed for a wide range of lighting needs. Built with military-grade quality, it offers exceptional brightness and durability, making it suitable for various applications. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your SF-R26 flashlight.
Figure 1: JETBeam SF-R26 Rechargeable Flashlight, showcasing el seu disseny compacte i robust.
Informació de seguretat
- Seguretat ocular: Do not shine the flashlight directly into eyes. The powerful beam can cause temporary vision impairment or permanent eye damage.
- Calor: The flashlight may become warm during prolonged use, especially on higher output modes. Handle with care.
- Seguretat de la bateria:
- Use only recommended battery types (1x 18650 or 2x CR123A).
- No barregeu piles velles i noves, o diferents tipus de piles.
- Assegureu-vos la polaritat correcta de la bateria durant la instal·lació.
- No llenceu les piles al foc. Poden explotar.
- If the flashlight will not be used for an extended period, remove the batteries to prevent leakage.
- Resistència a l'aigua: While the SF-R26 is resistant to strong water jets, it is not designed for prolonged submersion. Ensure the USB port cover is securely closed when exposed to water.
- Nens: Mantenir fora de l'abast dels nens.
Contingut del paquet
En obrir el paquet, comproveu que hi hagi tots els elements següents:
- JETBeam SF-R26 Flashlight
- Cable de càrrega micro USB
- 18650 Rechargeable Battery (if included with specific package)
- Corda
- Juntes tòriques de recanvi
- Manual d'usuari (aquest document)
Figure 2: Contents typically included with the JETBeam SF-R26 flashlight, including the flashlight, battery, USB cable, and accessories.
Configuració
1. Instal·lació de la bateria
The SF-R26 can be powered by one 18650 rechargeable Li-ion battery or two CR123A batteries. Ensure the battery is inserted with the positive (+) end facing towards the head of the flashlight.
- Desenrosqueu la tapa de la cua de la llanterna.
- Insert the battery(ies) according to the polarity markings. For 18650, the positive end goes towards the head. For CR123A, both positive ends go towards the head.
- Torneu a enroscar la tapa de la cua fermament per garantir un contacte adequat i una resistència a l'aigua.
2. Charging (for 18650 battery)
The SF-R26 features a convenient micro USB charging port for internal recharging of an 18650 battery. CR123A batteries are NOT rechargeable via the flashlight's USB port.
- Locate the micro USB charging port on the side of the flashlight. It is usually covered by a rubber flap.
- Aixequeu suaument la solapa de goma per exposar el port.
- Connect the micro USB cable to the flashlight's port and the other end to a USB power source (e.g., computer, wall adapter).
- The side switch LED indicator will show charging status (e.g., red for charging, green for fully charged).
- Un cop finalitzada la càrrega, desconnecteu el cable i premeu fermament la solapa de goma per tornar-la al seu lloc per mantenir la resistència a l'aigua.
Figure 3: The micro USB charging port on the side of the SF-R26, shown with a charging cable connected.
Instruccions de funcionament
1. Power On/Off (Tail Switch)
The tactical tail cap switch controls the main power of the flashlight.
- Momentània activada: Half-press the tail switch to momentarily turn on the light. Release to turn off.
- Constantment encès/apagat: Fully press the tail switch until it clicks to turn the light on or off.
Figure 4: The tactical tail switch of the SF-R26, used for power control.
2. Mode Selection (Side Switch)
With the flashlight turned on, use the side switch to cycle through different brightness levels and special modes.
- Nivells de brillantor: Short press the side switch to cycle through the available brightness modes (e.g., Low, Medium, High, Turbo). The SF-R26 offers 3 dimming outputs (10 lumens, 250 lumens) and a maximum output of 1200 lumens.
- Mode estroboscòpic: Press and hold the side switch for approximately 1-2 seconds to activate the Strobe mode. Short press again to return to the previous brightness level.
Figure 5: The side switch of the SF-R26, used for cycling through brightness modes and activating strobe.
3. Indicador d'alimentació
The side switch also functions as an LED power indicator. It will flash slowly and then quickly to indicate when the battery charge is low and needs replacement or recharging.
Manteniment
- Neteja: Netegeu el cos de la llanterna amb un drap suau iamp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Rosques i juntes tòriques: Periodically lubricate the threads and O-rings with silicone grease to maintain water resistance and smooth operation. Replace O-rings if they appear damaged or worn.
- Cura de la bateria:
- Guardeu les piles en un lloc fresc i sec.
- If using rechargeable 18650 batteries, recharge them regularly, even if not fully depleted, to prolong battery life.
- Remove batteries from the flashlight if it will not be used for an extended period to prevent potential leakage and damage.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llanterna no s'encén. |
|
|
| La llum és tènue o parpelleja. |
|
|
| La llanterna no es carrega. |
|
|
Especificacions
| Característica | Detall |
|---|---|
| Model | SF-R26 (9005721) |
| LED | CREE XP-L HI LED |
| Sortida màxima | 1200 lúmens |
| Nivells de brillantor | 10 Lumens, 250 Lumens, 1200 Lumens + Strobe |
| Peak Beam Distance | 373 metres (1250 peus) |
| Intensitat de feix de pic | 34796 cd |
| Font d'alimentació | 1 x 18650 rechargeable Li-ion battery OR 2 x CR123A batteries |
| Carregant | Micro USB (for 18650 only) |
| Material | Aerospace-grade aluminum alloy with military-grade Type III hard-anodized finish |
| Dimensions | 14.2 x 2.54 x 3.4 cm (5.59 x 1.0 x 1.34 polzades) |
| Pes | 108.86 grams (3.84 oz) |
| Color | Negre |
| Resistència a l'aigua | Resistant to strong water jets (USB port cover must be closed) |
Figura 6: Primer pla view of the CREE XP-L HI LED emitter, highlighting the light source.
Garantia i Suport
JETBeam products are manufactured to high quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official JETBeam website. If you encounter any issues or require technical assistance, please contact JETBeam customer support or your authorized dealer.
Fabricant: Sportsman Supply Inc.
Data de primera disponibilitat: 24 de febrer de 2017
