Introducció
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Anderic UC7078T (RR7078TR) Remote Control, designed for compatible Hampton Bay and Harbor Breeze ceiling fans. Please read this manual thoroughly before use to ensure proper functionality and longevity of your device.
Producte acabatview
The Anderic RR7078TR is a replacement remote control specifically engineered for various Hampton Bay and Harbor Breeze ceiling fan models. It offers intuitive control over fan speed, light operation (including dimming), and the fan's reverse function.
This image displays the front of the Anderic RR7078TR remote control, showing the buttons for Light/Dimmer, Lo, Med, Hi, Fan Off, and Reverse. The Anderic brand logo and model number RR7078TR are visible at the bottom.
Un clar view of the Anderic RR7078TR remote control's front panel, highlighting the button layout for fan and light functions, including Light/Dimmer, Lo, Med, Hi, Fan Off, and Reverse.
Instruccions de configuració
1. Instal·lació de la bateria
The Anderic RR7078TR remote control requires one 9V battery (not included).
- Localitza la tapa del compartiment de les piles a la part posterior del comandament a distància.
- Feu lliscar la coberta.
- Introduïu una pila de 9 V, assegurant-vos de la polaritat correcta (+/-).
- Substituïu la tapa del compartiment de la bateria.
2. Setting the Dip Switches
To ensure proper communication between the remote control and your ceiling fan receiver, the dip switches on both units must match.
- On the Remote (Transmitter):
- Traieu la tapa de la bateria.
- Localitzeu els interruptors DIP dins del compartiment de la bateria.
- Using a small screwdriver or ballpoint pen, slide the switches to your desired ON or OFF positions. It is recommended to avoid using the factory default setting (all switches in the UP position) to prevent potential interference with other devices.
- Substituïu la tapa de la bateria.
- Al receptor:
- Access the ceiling fan receiver (typically located in the fan's canopy).
- Localitzeu els interruptors DIP al receptor.
- Slide the receiver's dip switches to exactly match the pattern you set on your remote control.
This image shows the rear of the Anderic RR7078TR remote control with the battery cover open. A 9V battery is visible, along with the dip switch panel and a label providing instructions for setting the code.
A diagram showing how to set the code switches on both the remote control (transmitter) and the ceiling fan receiver. Figure A depicts the transmitter with its code switches, and Figure B shows the receiver with its corresponding code switches, emphasizing that they must match.
Nota: The remote and receiver depicted in images may look different from your actual product. Ensure your fan is operated in "HIGH SPEED" and the light is in "ON" condition at the switch knob during installation.
Instruccions de funcionament
Once the dip switches are matched and the battery is installed, your remote is ready for use.
- Light / Dimmer: Press this button to turn the light ON or OFF. Hold the button down to dim or brighten the light.
- Fan apagat: Premeu aquest botó per apagar el ventilador de sostre.
- Mira: Press this button for low fan speed.
- Med: Press this button for medium fan speed.
- Hola: Press this button for high fan speed.
- Revers: Press this button to change the direction of the fan blades. This function is typically used to circulate cool air downwards in summer or draw warm air upwards in winter.
Manteniment
- Substitució de la bateria: Replace the 9V battery when the remote's range decreases or buttons become unresponsive. Always use a fresh 9V alkaline battery.
- Neteja: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or solvents, as they may damage the remote's electronics or finish.
- Emmagatzematge: If storing the remote for an extended period, remove the battery to prevent leakage and potential damage to the device.
Resolució de problemes
| Problema | Solució |
|---|---|
| El comandament a distància no respon. | Check battery installation and charge. Ensure dip switches on remote and receiver match. Verify the fan's wall switch is ON. |
| Fan or light not turning on/off. | Confirm the fan's power supply is active. Re-check dip switch settings. Ensure the fan's pull chain (if any) is set to the highest speed and light is ON. |
| Light not dimming. | Verify your fan's light kit supports dimming. Some LED bulbs may not be dimmable. Hold the Light/Dimmer button longer for dimming functionality. |
| Fan operates but light does not, or vice versa. | This may indicate an issue with the receiver or the fan's wiring. Consult a qualified electrician if basic troubleshooting fails. |
Especificacions
- Model: RR7078TR
- Receptor compatible: FAN2R, UC7051R, UC7067REVB, and others.
- Font d'alimentació: 1 pila de 9V (no inclosa)
- Funcions: Fan Off, Low/Medium/High Fan Speed, Light On/Off/Dimmer, Reverse Fan Direction.
- Dimensions: Aproximadament 2.7 x 1.8 x 6.1 polzades
- Pes: Aproximadament 3.2 unces (sense bateria)
- Tecnologia de connectivitat: infrarojos
Garantia i Suport
Anderic products are designed for reliability and performance. For specific warranty details regarding your RR7078TR remote control, please refer to the manufacturer's official website or contact Anderic customer support directly.
Si necessiteu més ajuda o teniu preguntes que no es tracten en aquest manual, visiteu la Botiga Anderic a Amazon or contact their customer service for expert guidance.
