Introducció
This manual provides instructions for the assembly, operation, maintenance, and troubleshooting of your PawHut Elevated Dog Bed with Canopy, Model D04-059. This elevated pet cot is designed to provide a comfortable resting space for your dog, both indoors and outdoors, offering airflow and shade.
Image: Assembled PawHut Elevated Dog Bed with Canopy in Grey.
Informació de seguretat
- Ensure all components are securely assembled before allowing your pet to use the bed.
- No supereu la capacitat màxima de pes de 35 kg (77 lliures).
- Regularly inspect the bed for any signs of wear, damage, or loose parts. Discontinue use if damaged.
- Keep the product away from open flames or excessive heat sources.
- Supervise pets, especially puppies, to prevent chewing on components.
- Place the bed on a flat, stable surface to prevent tipping.
Contingut del paquet
Verifiqueu que hi hagi totes les peces abans de començar el muntatge:
- Elevated Bed Frame Components (metal tubes, corner connectors)
- Bed Fabric (polyester mesh)
- Canopy Fabric (190T PU Covering Polyester Taffeta)
- Barres de suport de la marquesina
- Bungee Cords (for canopy attachment)
- 210D Oxford Carry Bag
- Assembly Instructions (pictorial)
Muntatge i muntatge
Assembly typically requires minimal tools and can be completed by one person. Refer to the included pictorial instructions for detailed steps. The following general steps apply:
- Muntar el marc del llit: Connect the metal tubes using the corner connectors to form the rectangular base. Ensure all connections are firm.
- Attach the Bed Fabric: Lay the bed fabric over the assembled frame. Locate the Velcro flap on one short side of the fabric. Fully open this flap. Stretch the fabric over the frame, ensuring the Velcro flap is positioned correctly to secure the fabric tightly once the frame is fully assembled.
- Secure the Fabric: Once the fabric is stretched over the frame, close the Velcro flap to secure the fabric. This step is crucial for preventing sagging.
- Install Canopy Connectors: Ensure the corner connectors on the bed frame have small holes facing upwards. These are for the canopy support rods.
- Assemble the Canopy: Connect the canopy support rods to form the canopy structure.
- Attach the Canopy to the Bed: Insert the ends of the canopy support rods into the upward-facing holes on the bed frame's corner connectors. Secure the canopy fabric to the frame using the provided bungee cords.
Image: The PawHut Elevated Dog Bed with Canopy fully assembled, ready for use.
Instruccions de funcionament
The PawHut Elevated Dog Bed with Canopy is designed for straightforward use:
- Col·locació: Position the bed on a level surface, either indoors or outdoors. The elevated design promotes airflow, keeping your pet cool.
- Ús de la marquesina: The canopy provides shade and protection from direct sunlight. It can be easily attached or removed as needed.
- Portabilitat: For transport or storage, disassemble the bed and pack it into the included carry bag.
Manteniment i cura
- Neteja: The bed fabric can be cleaned with mild soap and water. Hand wash only. Allow to air dry completely before reassembly or storage.
- Cura del marc: Netegeu el marc metàl·lic amb anunciamp tela segons sigui necessari.
- Emmagatzematge: When not in use, disassemble the bed and store it in the provided carry bag in a dry, cool place to prolong its lifespan.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Bed fabric sags excessively. | Fabric not stretched tightly enough during assembly; Velcro flap not secured. | Disassemble and reassemble the bed, ensuring the fabric is pulled taut and the Velcro flap is firmly secured. |
| La capota no es manté fixada. | Canopy support rods not fully inserted; bungee cords loose or damaged. | Ensure canopy support rods are fully seated in the frame connectors. Check bungee cords for damage and replace if necessary. |
| Bed feels unstable. | Frame components not fully connected; bed placed on uneven surface. | Verify all frame connections are secure. Move the bed to a flat, stable surface. |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | D04-059 |
| Dimensions generals | 92L x 76W x 90H cm (36.2"L x 29.9"W x 35.4"H) |
| Bed to Floor Height | 7.1 polzades (18 cm) |
| Capacitat de pes | 35 kg (77 lliures) |
| Pes net | 2.6 kg (5.72 lliures) |
| Materials | Iron frame, 600D PVC Oxford bed cloth, Teslin, 190T PU Covering Polyester Taffeta Canopy |
| Color | Gris i Negre |
| Ús recomanat | Interior, Exterior |
| Instruccions de cura | Rentat només a mà |
Garantia i Suport
For warranty information or technical support, please refer to the contact details provided at the point of purchase or visit the official PawHut weblloc web. Conserveu el rebut de compra per a qualsevol reclamació de garantia.
Vídeos de productes
En aquest moment no hi ha vídeos oficials de productes del venedor disponibles per incrustar.
