Fame Audio MS 12002 Power Ampmés viu

1. Introducció

This manual provides essential information for the safe and efficient operation of your Fame Audio MS 12002 Power Amplifier. Please read this manual thoroughly before operating the device to ensure proper setup, usage, and maintenance. Retain this manual for future reference.

The Fame Audio MS 12002 is a professional 2-channel power amplifier designed for sound reinforcement applications, delivering 2 x 1120 W into 4 ohms.

2. Instruccions de seguretat

ADVERTIMENT: To reduce the risk of electric shock, do not expose this equipment to rain or moisture. Do not remove the cover. No user-serviceable parts inside. Refer servicing to qualified personnel.

• Font d'alimentació: Connecteu la unitat només a una presa de corrent de CA del volum especificat.tage (220-230V~ 50Hz). Ensure the power cord is securely plugged in.
• Ventilació: Ensure adequate ventilation. Do not block ventilation openings. Maintain at least 10 cm (4 inches) of space around the unit for proper airflow.
• Humitat: Do not expose the unit to water, rain, or excessive humidity. Do not place objects filled with liquids on the unit.
• Calor: Mantingueu la unitat allunyada de fonts de calor com ara radiadors, registres de calor, estufes o altres aparells que produeixin calor.
• Neteja: Desconnecteu el cable d'alimentació abans de netejar. Feu servir només un drap sec.
• Manteniment: No intenteu fer el manteniment d'aquesta unitat vosaltres mateixos. Envieu totes les tasques de manteniment a personal de servei qualificat.
• Posada a terra: La unitat ha d'estar correctament connectada a terra per evitar descàrregues elèctriques.

3. Configuració

Una configuració adequada és crucial per a un rendiment i una seguretat òptims.

3.1 Desembalatge i col·locació

• Traieu amb cura amplifier from its packaging.
• Col·loca el amplifier on a stable, level surface or mount it in a standard 19-inch equipment rack.
• Ensure there is sufficient space around the unit for ventilation, especially at the front and rear.

3.2 Connexions del panell posterior

The rear panel provides all input, output, and control connections. Refer to the image below for a visual guide.

Image: Rear panel of the Fame Audio MS 12002 Power Amplificador. Això view displays the input section (XLR and RCA), output section (Speakon and binding posts), power input, and various switches for HPF, Mode, and Sensitivity.

Imatge: Primer pla view of the rear panel, highlighting the input and output connectors, along with the HPF, Mode, and Sensitivity switches for detailed configuration.

• Power Input (220-230V~ 50Hz): Connect the supplied power cable to this socket and then to a grounded AC outlet.
• Inputs (CH.A, CH.B):
  • XLR: For balanced audio signals from a mixer or preampmés viu.
  • RCA: For unbalanced audio signals.
• Outputs (CH.A, CH.B):
  • Speakon (1+ = +, 1- = -): For connecting loudspeakers. Ensure correct polarity.
  • Posts d'enquadernació: Alternative connection for loudspeakers, also ensuring correct polarity.
• HPF (High Pass Filter) Switch: Selects the high-pass filter frequency for each channel.
  • 120Hz: Filters out frequencies below 120Hz.
  • 90Hz: Filters out frequencies below 90Hz.
  • Bypass: Disables the high-pass filter.
• Interruptor de MODE: Configura el amplifier's operating mode.
  • PAR (Parallel): Both channels receive the same input signal from Channel A.
  • STR (Stereo): Each channel operates independently with its own input signal.
  • BRI (Bridge): Combines both channels into a single, more powerful mono output. Use only with appropriate speaker impedance.
• SENSITIVITY Switch: Ajusta la sensibilitat d'entrada per a cada canal.
  • 1.4 V: For higher input levels.
  • 26 dB: Standard professional input sensitivity.
  • 0.775 V: For lower input levels.

3.3 Procediment de connexió

1. Assegureu-vos el amplifier is powered off and unplugged.
2. Connecteu la font d'àudio (mesclador, preamplificador)amplifier) to the input jacks (XLR or RCA) on the rear panel.
3. Connect your loudspeakers to the output jacks (Speakon or binding posts) on the rear panel. Ensure correct impedance matching and polarity.
4. Set the HPF, MODE, and SENSITIVITY switches according to your system requirements.
5. Plug the power cable into a grounded AC outlet.

4. Instruccions de funcionament

Once connected, you can begin operating your ampmés viu.

4.1 Controls del panell frontal

Image: Front panel of the Fame Audio MS 12002 Power Amplificador. Això view shows the main power switch, individual channel level controls, and LED indicators for signal, clip, and protection.

• Interruptor d'alimentació: Gira el amplifier on or off. Always turn on the amplifier last and turn it off first in your audio chain.
• Channel Level Controls (CH.A, CH.B): Rotary knobs to adjust the output level for each channel. Start with these controls at their minimum position before powering on.
• Indicadors LED:
  • SENYAL: S'il·lumina quan hi ha un senyal d'àudio.
  • CLIP: Illuminates when the output signal is clipping (distorting). Reduce the input level or channel level to prevent clipping.
  • PROT (Protection): S'il·lumina si el amplifier enters protection mode due to overheating, short circuit, or DC offset.

4.2 Encès i apagat

1. Ensure all channel level controls are set to minimum.
2. Premeu l'interruptor d'encesa per encendre el amplifier. The power indicator should illuminate.
3. Gradually increase the channel level controls to the desired volume.
4. When finished, reduce the channel level controls to minimum, then press the power switch to turn off the ampmés viu.

5. Manteniment

Regular maintenance ensures the longevity and reliable performance of your ampmés viu.

• Neteja: Utilitzeu un drap suau i sec per netejar l'exterior ampNo utilitzeu netejadors líquids ni dissolvents.
• Ventilació: Periodically check that the ventilation openings are clear of dust and debris. Use a soft brush or compressed air to clean them if necessary.
• Connexions: Ensure all input and output cables are securely connected. Loose connections can cause signal loss or intermittent operation.
• Emmagatzematge: Si emmagatzema el amplifier for an extended period, ensure it is in a dry, dust-free environment.

6. Solució De Problemes

Si teniu problemes, consulteu els problemes i solucions habituals següents.

If the problem persists after attempting these solutions, contact customer support or qualified service personnel.

7. Especificacions

Technical specifications for the Fame Audio MS 12002 Power Ampmés viu.

• Model: MS 12002
• Fabricant: Fame Audio
• Potència de sortida: 2 x 1120 W / 4 Ohm (Stereo)
• Nombre de canals: 2
• Sensibilitat d'entrada: 1.4V, 26dB, 0.775V (selectable)
• Filtre de pas alt (HPF): 120Hz, 90Hz, Bypass (selectable)
• Modes de funcionament: Parallel (PAR), Stereo (STR), Bridge (BRI)
• Dimensions (L x A x A): 56.5 x 55.5 x 17 cm (22.2 x 21.8 x 6.7 polzades)
• Pes: 20.4 kg (44.9 lliures)
• Font d'alimentació: 220-230V~ 50Hz
• Tipus de muntatge: Standalone, Rack-mountable

8. Garantia i Suport

Fame Audio provides a 3-year Music Store warranty for this product. For customer service, technical support, or warranty claims, please contact your retailer or the manufacturer directly.

Please have your purchase receipt and product model number (MS 12002) available when contacting support.