CHANZON LED Driver Instruction Manual

1. Introducció

This manual provides essential information for the safe and efficient use of your CHANZON Constant Current LED Driver. Constant Current LED Drivers are designed to supply a consistent amount of current to LEDs, ensuring optimal performance and longevity regardless of minor variations in the load. This makes them ideal for various LED applications, including floodlights, spotlights, high-power COB LEDs, and LED panel lights.

The CHANZON LED Driver series is engineered for high quality, featuring isolation protection and CE certification to ensure safety and reliability. It operates with an AC 100-240V input and provides a constant 300mA output current with an output voltage range of 3-20V, suitable for 1-6W LED configurations. Its compact design and flicker-free operation contribute to a superior lighting experience.

2. Característiques del producte

• Entrada: CA 100-240V 50/60Hz
• Sortida: Constant Current 300mA; Voltage 3-20V; Power 1-6W
• Dimensions: 51.8 x 27.9 x 20.1 mm (2.04 x 1.1 x 0.79 polzades)
• Pes: 20 g (0.7 oz)
• High Quality with CE Certificates, ensuring long lifespan and safety.
• No audible noise during operation.
• Isolation Protection for enhanced safety.
• Efficiency: Greater than 85%.
• Flicker-free output for stable illumination.
• Insulated (Low Heat) Cable with SMP Connector.
• Designed for most LED products requiring constant current power supply.

Imatge 1: Frontal view of the Chanzon LED Driver, highlighting its compact plastic case and wired connections.

3. Configuració i instal·lació

Proper installation is crucial for the safe and effective operation of your LED driver. Always ensure power is disconnected before beginning any wiring.

1. Identificar connexions: The driver has clearly labeled input and output wires. The input wires (Brown for Live 'L' and Blue for Neutral 'N') connect to your AC 100-240V power source. The output wires (Red for positive '+' and Black for negative '-') connect to your LED product.
2. Cablejat: Connect the AC input wires to your mains power supply. Connect the DC output wires to your LED load, ensuring correct polarity (Red to LED positive, Black to LED negative).
3. Connexions segures: Use appropriate wire connectors (e.g., wire nuts, solder, or terminal blocks) to ensure all connections are secure and insulated.
4. Muntatge: Position the driver in a location that allows for adequate ventilation and is protected from moisture and extreme temperatures. The compact size allows for flexible placement within light fixtures or enclosures.
5. Verify Load: Ensure that the connected LED load's voltage and current requirements fall within the driver's specified output range (3-20V, 300mA).

Image 2: Detailed diagram showing the dimensions of the LED driver and its AC input (Brown L, Blue N) and DC output (Red +, Black -) connections.

4. Instruccions de funcionament

The CHANZON Constant Current LED Driver is designed for straightforward operation once correctly installed. It automatically regulates the current supplied to the LEDs, ensuring consistent brightness and protecting the LEDs from overcurrent.

• Encès: After completing all wiring and ensuring connections are secure, apply AC power to the driver's input. The connected LEDs should illuminate.
• Sortida de corrent constant: This driver maintains a constant 300mA output current. The output voltage will automatically adjust within the 3-20V range to match the forward voltage requirements of the connected LEDs.
• Nota important: The output DC voltage can only be accurately measured under a loaded circuit (i.e., with LEDs connected). Measuring voltage without a load will result in an inaccurate reading, often showing a higher voltage than the operational voltage.

5. Manteniment

The CHANZON LED Driver is designed for long-term, maintenance-free operation. However, following these general guidelines can help ensure its continued reliability:

• Mantenir net: Ensure the driver is free from dust and debris, which can impede heat dissipation.
• Condicions ambientals: Operate the driver within its specified temperature and humidity ranges. Avoid exposing it to excessive heat, cold, or moisture.
• Inspeccionar connexions: Periodically check all electrical connections to ensure they remain tight and free from corrosion.
• Eviteu la sobrecàrrega: Do not connect LEDs that exceed the driver's maximum power or voltage specifications, as this can lead to premature failure.

6. Solució De Problemes

If you encounter issues with your LED driver, consider the following troubleshooting steps:

• Els LED no s'il·luminen:
  • Check AC input power to the driver.
  • Verify all wiring connections, especially polarity (Red to +, Black to -) for the LEDs.
  • Ensure the LED load is within the driver's specified voltage i rang actual.
  • Inspect individual LEDs for damage or burnout.
• Flickering LEDs:
  • Confirm the driver is not overloaded.
  • Comproveu si hi ha connexions soltes.
  • Ensure the driver is receiving stable AC input voltage.
• Driver Overheating:
  • Assegureu-vos que hi hagi una ventilació adequada al voltant del conductor.
  • Verify the LED load does not exceed the driver's maximum power rating.
• Sense Vol de sortidatage (when measured without load): This is normal. As a constant current driver, its output voltage is regulated by the load. Always measure voltage with the LEDs connected.

Image 3: A reminder that constant current LED drivers output a constant current, not constant voltage, and should be carefully matched to LED requirements. Also shows various types of CHANZON LED drivers.

7. Especificacions

8. Garantia i Suport

CHANZON products are manufactured to high-quality standards and are CE certified, indicating compliance with essential health and safety requirements. For specific warranty details or technical support, please refer to the product packaging or contact CHANZON customer service directly.

You can find more information and contact details by visiting the official CHANZON store: CHANZON Store on Amazon.