Manual d'usuari de la placa de gas Indesit Aria PAA642/IBK 58cm

1. Introducció

Thank you for choosing the Indesit Aria PAA642/IBK 58cm Gas Hob. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new appliance. Please read these instructions carefully before using the hob and keep them for future reference.

Informació important de seguretat:

• This appliance must be installed by a qualified technician in accordance with local regulations and standards.
• Assegureu-vos que hi hagi una ventilació adequada a la zona de la cuina.
• No emmagatzemeu materials inflamables a prop de la placa de cocció.
• Always supervise cooking and never leave the hob unattended when in use.
• Mantenir els nens allunyats de l'aparell durant el funcionament.
• After use, ensure all control knobs are in the 'OFF' position.

Figure 1: Indesit Aria PAA642/IBK 58cm Gas Hob. This image displays the Indesit Aria PAA642/IBK 58cm Gas Hob. It features a sleek black enamel surface, four gas burners with sturdy pan supports, and four rotary control knobs located on the right side for easy operation. The Indesit logo is visible on the control panel.

2. Configuració i instal·lació

The installation of this gas hob must be carried out by a qualified and registered gas installer, in compliance with all relevant national and local regulations.

2.1 Desembalatge

Carefully remove the hob from its packaging. Check for any damage that may have occurred during transit. Report any damage immediately to your supplier.

2.2 Dimensions i retall

The hob is designed for drop-in installation into a countertop. Ensure the countertop material is heat-resistant.

• Dimensions del producte (A x A x P): 4.0 cm x 58.0 cm x 51.0 cm (aproximadament 1.57 x 22.83 x 20.08 polzades)
• Minimum Distance to Cooker Hood: 75 cm

Refer to the installation template (if provided with the product) for precise cut-out dimensions. Maintain adequate clearance from adjacent walls and cabinets.

2.3 Connexió de gas

This appliance is designed for use with natural gas. An LPG conversion kit is included if you need to use Liquefied Petroleum Gas. The gas connection must be performed by a qualified professional.

2.4 Connexió elèctrica

The hob requires an electrical connection for the push-button ignition system. Connect the appliance to a properly grounded electrical outlet. Power requirements are standard household plug.

3. Instruccions de funcionament

Your Indesit Aria gas hob features four burners with varying power outputs, controlled by easy-to-use rotary dials and a push-button ignition.

3.1 Lighting a Burner

1. Ensure the pan supports are correctly positioned over the burners.
2. Col·loqueu els vostres estris de cuina al cremador desitjat.
3. Premeu i gireu el botó de control corresponent en sentit antihorari fins a la posició de flama màxima (símbol de flama gran).
4. Simultaneously press the ignition button (usually marked with a spark symbol). You will hear a clicking sound as the igniter sparks.
5. Once the flame ignites, continue to hold the control knob down for a few seconds (approximately 5-10 seconds) to allow the thermocouple to heat up and activate the flame failure device.
6. Deixeu anar el botó de control. Si la flama s'apaga, repetiu els passos 3-5.

3.2 Ajust de la flama

Once the burner is lit, you can adjust the flame intensity by rotating the control knob:

• Turn counter-clockwise towards the small flame symbol for a lower flame.
• Turn clockwise towards the large flame symbol for a higher flame.
• The burner power range is typically between 1 KW and 3 KW, depending on the burner size.

3.3 Turning Off a Burner

To turn off a burner, rotate the control knob clockwise until it clicks into the 'OFF' position (usually marked with a dot or '0').

4. Manteniment i Neteja

Regular cleaning and maintenance will ensure the longevity and optimal performance of your gas hob. Always ensure the hob is cool and disconnected from the power supply before cleaning.

4.1 Neteja de la superfície de la placa

• The black enamel hob surface is easy to clean. Use a soft cloth or sponge with warm soapy water.
• For stubborn stains, use a non-abrasive cleaner specifically designed for enamel surfaces.
• Avoid abrasive pads, scourers, or harsh chemicals as they can damage the surface.
• Assequeu amb un drap net per evitar marques d'aigua.

4.2 Cleaning Pan Supports and Burner Components

• The enamel pan supports can be removed for cleaning. Wash them in warm soapy water or place them in a dishwasher if suitable (check product specifications for dishwasher compatibility).
• The burner caps and crowns can also be removed. Clean them with warm soapy water and a soft brush. Ensure they are completely dry before reassembling.
• Periodically check the burner holes for any blockages and clean them gently with a fine brush or needle if necessary.
• Ensure all burner components are correctly reassembled before using the hob again. Incorrect assembly can lead to uneven flames or ignition issues.

4.3 botons de control

The rotary control dials can be pulled off for cleaning. Wipe them with a damp cloth and mild detergent. Ensure they are dry before reattaching.

5. Solució De Problemes

Abans de contactar amb el servei d'atenció al client, consulteu la següent guia de resolució de problemes per conèixer els problemes més comuns.

Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb un tècnic de servei qualificat.

6. Especificacions