Commutador KVM HDMI TESmart de 8 ports

1. Introducció

The TESmart 8 Port HDMI KVM Switch (Model HKS801-L23) allows you to control up to eight host devices (computers, servers, DVR/NVR, laptops, etc.) from a single set of USB keyboard, USB mouse, and HDMI monitor. This device supports 4K@30Hz resolution and includes features such as IR remote control, RS232 serial commands, LAN port control, and an auto-scan function. It is designed to streamline your workspace by reducing the number of peripherals required for multiple systems.

2. Informació de seguretat

• Assegureu-vos una ventilació adequada al voltant del dispositiu.
• No exposeu el dispositiu a l'aigua ni a una humitat excessiva.
• Utilitzeu només l'adaptador d'alimentació subministrat.
• Eviteu col·locar objectes pesats al dispositiu.
• Mantingueu el dispositiu allunyat de les fonts de calor.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• 1 x TESmart 8 Port HDMI KVM Switch (HKS801-L23)
• 1 x adaptador d'alimentació DC 12V
• 1 x Comandament a distància per infrarojos (piles AAA no incloses)
• 1 x cable receptor IR
• 4 x 5ft/1.5m KVM Cables (HDMI + USB)
• 1 x 3-Pin RS232 Connector
• 2 x Rack Mount Ears with Screws
• 1 x Manual d'usuari

Image: Contents of the TESmart 8 Port HDMI KVM Switch package.

4. Producte acabatview

4.1. Dimensions del dispositiu

Image: Physical dimensions of the KVM switch.

4.2. Front and Rear Panel Layout

Imatge: Detallada view of the KVM switch's front and rear panels with labeled ports and indicators.

• Panell frontal: LED display, front panel keypad (for manual switching and auto-scan settings), IR receiver, status indicator, LAN port, power switch.
• Panell posterior: 3 Pins jack for RS232 console, HDMI output port, keyboard and mouse input (USB), USB 2.0 Hub ports, DC 12V Power Adapter input, IR receiver port, HDMI input ports (PC1-PC8).

5. Instruccions de configuració

Follow these steps to set up your TESmart 8 Port HDMI KVM Switch:

1. Apaga tots els dispositius: Ensure the KVM switch, monitor, keyboard, mouse, and all host computers are powered off before making connections.
2. Connecta el monitor: Connect your HDMI monitor to the HDMI output port on the KVM switch.
3. Connecteu el teclat i el ratolí: Connecteu el teclat i el ratolí USB als ports USB dedicats del commutador KVM.
4. Connect Host Devices: Use the provided KVM cables (HDMI + USB) to connect each host device to the corresponding HDMI input port (PC1-PC8) and USB input port on the KVM switch.
5. Connect Optional Devices:
   • For additional USB 2.0 devices (scanners, USB drives), connect them to the USB 2.0 Hub ports.
   • For IR remote control, connect the IR receiver cable to the IR IN port.
   • For RS232 or LAN control, connect the respective cables to the RS232 or LAN ports.
6. Connectar l'alimentació: Plug the DC 12V power adapter into the KVM switch and then into a power outlet.
7. Encès: Power on the KVM switch, then your monitor, and finally each host device.

Image: Diagram illustrating the connection of various devices to the KVM switch.

6. Instruccions de funcionament

6.1. Switching Between Inputs

The KVM switch offers multiple methods for switching between connected host devices:

• Botons del tauler frontal: Press the numbered buttons (1-8) on the front panel corresponding to the desired input.
• Control remot IR: Use the numbered buttons on the IR remote control to select the desired input. Ensure AAA batteries are installed in the remote.
• Tecles d'accés ràpid del teclat: Feu doble toc a Bloqueig de desplaçament key, then press the number (1-8) corresponding to the desired input.
• RS232/TCP/IP Commands: The switch can be controlled via RS232 serial commands or TCP/IP commands for advanced integration. Refer to the detailed protocol in the full manual for specific commands.

6.2. Auto-Scan Function

The auto-scan function allows the KVM switch to automatically cycle through connected inputs at a set interval. This is useful for monitoring multiple systems.

• Activate Auto-Scan: Use the 'P' button on the IR remote control or the dedicated auto-scan button on the front panel. The status indicator will light up.
• Adjust Scan Interval: The time interval for auto-scanning can be adjusted from 5 seconds to 60 minutes using the front panel buttons or specific remote/software commands.
• Deactivate Auto-Scan: Press the 'P' button on the IR remote control again or the auto-scan button on the front panel.

6.3. Transmissió d'àudio

The KVM switch supports audio transmission over HDMI. If your monitor or connected display has speakers, audio from the selected host device will be played through them. An external audio output can also be used if connected to the monitor's audio out port.

6.4. EDID Technology

The KVM switch incorporates EDID (Extended Display Identification Data) technology to ensure consistent display resolution and prevent desktop icon rearrangement when switching between inputs. This feature allows the input device to maintain communication with the output device even when not actively selected, preserving native resolution settings.

7. Manteniment

• Neteja: Feu servir un drap suau i sec per netejar l'exterior del commutador KVM. No utilitzeu netejadors líquids ni en aerosol.
• Gestió de cables: Ensure cables are neatly organized and not under tension to prevent damage to ports or cables.
• Actualitzacions de firmware: Comproveu el del fabricant weblloc web periòdicament per a les actualitzacions de firmware disponibles per garantir un rendiment i una compatibilitat òptims.

8. Solució De Problemes

• Sense pantalla/Resolució incorrecta:
  • Assegureu-vos que tots els cables HDMI estiguin connectats correctament.
  • Verifiqueu que el monitor estigui encès i configurat a la font d'entrada correcta.
  • Restart the KVM switch and the connected host device.
  • If using a 4K display, ensure your host device's graphics card supports 4K@30Hz.
  • If the display resolution is incorrect, try rebooting the source device after connecting it to the switch.
• El teclat/ratolí no respon:
  • Assegureu-vos que el teclat i el ratolí estiguin connectats als ports USB dedicats del commutador KVM.
  • Try reconnecting the keyboard and mouse.
  • Some specialized gaming keyboards/mice may require direct connection to the computer or may not be fully compatible with KVM emulation ports. Try a standard keyboard/mouse to isolate the issue.
• Auto-Scan Not Working:
  • Verify that the auto-scan function is activated (status indicator lit).
  • Check the set time interval; it might be too long.
• Sense àudio:
  • Ensure HDMI cables support audio transmission.
  • Check audio settings on the host device and monitor.
• El control remot no funciona:
  • Ensure AAA batteries are correctly installed and not depleted.
  • Verify the IR receiver cable is properly connected to the KVM switch.
  • Assegureu-vos que no hi hagi obstacles entre el comandament a distància i el receptor d'infrarojos.

9. Especificacions

10. Garantia i assistència

Garantia: This TESmart product comes with a 1-year warranty service from the date of purchase. Please retain your proof of purchase for warranty claims.

Suport tècnic: For technical assistance, troubleshooting, or any inquiries regarding your TESmart 8 Port HDMI KVM Switch, please contact TESmart customer support. Refer to the official TESmart weblloc web per obtenir la informació de contacte més actualitzada.