Aqua Control C1114 Automatic Garden Irrigation Programmer User Manual

1. Introducció

The Aqua Control C1114 Automatic Garden Irrigation Programmer is designed to automate your garden's watering system, managing up to 4 independent irrigation zones. This programmer ensures efficient water distribution by allowing precise control over watering schedules, durations, and frequencies. It features an intuitive LCD display and a rotary dial for easy programming.

2. Característiques del producte

• Multi-Zone Control: Manages up to 4 independent irrigation zones.
• Programació flexible: Offers two independent programs (A and B), each with up to 4 start times.
• Durada ajustable: Watering duration can be set from 1 minute to 240 minutes (4 hours).
• Opcions de freqüència: Program by specific days of the week, every 'x' days, or odd/even days.
• Funció de retard per pluja: Temporarily suspends watering for 0, 24, 48, or 72 hours due to rain or other factors.
• Rain Sensor Compatibility: Connect an external rain sensor to automatically stop watering on rainy days.
• Arrencada de la vàlvula mestra/bomba: Includes a connection for a pump or master valve.
• Interfície fàcil d'utilitzar: Large LCD display and intuitive rotary dial for easy programming and monitoring.
• Opció de reg manual: Allows for immediate, unscheduled watering.

3. Configuració i instal·lació

3.1 Font d'alimentació

The programmer requires a 230 VAC, 50 Hz input transformer (included) which outputs 24 VAC, 0.650A. Additionally, 2 AA alkaline batteries (not included) are required for memory backup and display operation during power outages.

3.2 Connexions de cablejat

Open the battery compartment cover to access the wiring terminals. Connect your solenoid valves, master valve (if applicable), and rain sensor to the appropriate terminals as indicated on the unit.

• 24 VCA: Connect the transformer output.
• SENSER: Connect an optional rain sensor.
• C (Comú): Connect the common wire from all solenoid valves.
• M (Master Valve): Connect the master valve, if used.
• 1, 2, 3, 4: Connect individual zone solenoid valves.

3.3 Muntatge

Mount the programmer in a sheltered location, away from direct sunlight and extreme weather conditions, using appropriate fasteners through the mounting holes provided.

4. Instruccions de funcionament

The Aqua Control C1114 features a rotary dial and several buttons for easy navigation and programming. Refer to Figure 3 for a visual guide to the control panel.

4.1 Tauler de control acabatview

• Pantalla LCD: Shows current time, program settings, and status.
• Marcador rotatiu: Used to select programming modes (SET CLOCK, START TIME, HOW LONG, HOW OFTEN, ON, OFF).
• Botó MANUAL: Initiates manual watering.
• PROG A/B Button: Toggles between Program A and Program B.
• Botó ENTER: Confirma les seleccions i la configuració.
• < / > Buttons: Navigate between parameters or adjust values.
• Botons + / -: Increase or decrease numerical values.
• RAIN DELAY Button: Activates or adjusts the rain delay function.
• Botó ESBORRA: Clears current settings or inputs.
• Botó de reset: Resets all programming to factory defaults (located under the dial).

4.2 Initial Setup: Setting Current Time and Date

1. Gireu el dial giratori cap a CONFIGURA EL RELOJ.
2. Utilitza el + or - buttons to set the current hour. Press ENTRAR.
3. Set the current minute. Press ENTRAR.
4. Set the current day of the week. Press ENTRAR.
5. Gireu el dial a ON to save settings and return to normal operation.

4.3 Programming Irrigation Schedules (Program A/B)

The programmer allows for two independent programs, A and B. Each program can have up to 4 start times.

1. Premeu el botó PROG A/B button to select either Program A or Program B. The selected program will be displayed on the LCD.
2. Gireu el dial giratori cap a HORA D'INICI.
3. Ús + or - to set the first start time. Press ENTRAR.
4. Repeat for up to 4 start times. If fewer than 4 are needed, press ENTRAR to skip remaining start times.
5. Gireu el dial giratori cap a QUANT TEMPS.
6. Ús + or - to set the watering duration for each zone (from 1 to 240 minutes). Use the < or > buttons to select the zone (1-4) you wish to set. Press ENTRAR after setting each zone's duration.
7. Gireu el dial giratori cap a QUANT FREQUENT.
8. Select the watering frequency:
   • Specific Days: Ús < or > to select days of the week (e.g., MO, TU, WE). Press ENTRAR to select/deselect.
   • Every X Days: Select this option and use + or - to set the interval (e.g., every 2 days).
   • Odd/Even Days: Select to water on odd or even calendar days.
   Premeu ENTRAR to confirm your frequency selection.
9. Gireu el dial a ON to activate the program.

4.4 Reg manual

To initiate manual watering:

1. Ensure the rotary dial is set to ON.
2. Premeu el botó MANUAL botó.
3. Ús + or - per configurar la durada de reg manual desitjada.
4. Premeu ENTRAR to start manual watering. The display will show the remaining time.
5. Per aturar el reg manual, premeu CLAR or turn the dial to OFF i després torna a ON.

4.5 Funció de retard per pluja

To temporarily suspend watering:

1. Ensure the rotary dial is set to ON.
2. Premeu el botó RETARD DE LA PLUJA botó.
3. Ús + or - to select the delay duration (0, 24, 48, or 72 hours).
4. Premeu ENTRAR to activate the rain delay. The display will show the remaining delay time.
5. To cancel the rain delay, press RETARD DE LA PLUJA again and set the duration to 0, then press ENTRAR.

4.6 Turning Off the Programmer

To completely stop all automatic watering, turn the rotary dial to OFF. To resume, turn the dial back to ON.

5. Manteniment

• Neteja: Netegeu la unitat amb un suau, damp drap. No utilitzeu productes de neteja abrasius ni submergiu la unitat en aigua.
• Substitució de la bateria: Replace the 2 AA alkaline batteries annually or when the low battery indicator appears on the LCD to ensure program memory retention during power outages.
• Hivernització: In freezing climates, disconnect the programmer from the power supply and remove it from its outdoor location. Store it indoors in a dry, frost-free environment.

6. Solució De Problemes

7. Especificacions

• Model: C1114
• Àrees: Up to 4 independent zones
• Entrada del transformador: 230 VCA, 50 Hz
• Sortida del transformador: 24 VAC, 0.650 A
• Output per Station: 24 VAC, 15.6 VA
• Master Valve Output: 24 VAC, 15.6 VA
• Requisits de bateria: 2 x AA Alkaline batteries (not included)
• Programming Duration: 1 minut a 240 minuts (4 hores)
• Protecció de sobrecàrrega: Sí
• Pes de l'article: Aproximadament 500 grams
• Fabricant: Aqua Control

8. Garantia i Suport

For warranty information or technical support, please contact Aqua Control customer service. Refer to the product packaging or the official Aqua Control weblloc per obtenir dades de contacte.