Introducció
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Orbit B-hyve Indoor/Outdoor 12 Station WiFi Sprinkler System, model 57950, and the accompanying 12 Rain Catch Cups. Please read this manual thoroughly before installation and operation to ensure proper use and to maximize the lifespan of your product.

Image: The Orbit B-hyve Indoor/Outdoor 12 Station WiFi Sprinkler System (left) with its control panel and display, alongside a white Orbit Rain Catch Cup with a green stake (right).
Informació important de seguretat
Observeu sempre les següents precaucions de seguretat per reduir el risc de lesions o danys:
- Llegiu atentament totes les instruccions abans de la instal·lació i el funcionament.
- Disconnect power before performing any maintenance or wiring.
- Ensure the product is installed in a location protected from direct water spray, unless specifically designed for outdoor exposure.
- Utilitzeu només cablejat i connectors homologats.
- Keep children away from the sprinkler system during operation.
Configuració i instal·lació
Contingut del paquet:
- Orbit B-hyve 12-Station WiFi Sprinkler Timer
- Adaptador d'alimentació
- Maquinari de muntatge (cargols, ancoratges)
- 12 Rain Catch Cups
- Guia d'inici ràpid
Muntatge del temporitzador:
- Choose a suitable indoor or outdoor location near a power outlet and away from direct sunlight or extreme weather.
- Mark the desired mounting points using the timer as a template.
- Perforeu forats pilot i inseriu ancoratges de paret si cal.
- Secure the timer to the wall using the provided screws.
Wiring the Sprinkler Valves:
Connect your sprinkler valve wires to the corresponding terminals on the B-hyve timer. Each station (1-12) corresponds to a specific zone. Ensure the common wire from your valves is connected to the "COMMON" terminal.
- Cable comú: Connect to the terminal labeled "COMMON".
- Cables de zona: Connect each zone wire to its respective numbered terminal (1-12).
- Master Valve/Pump Start (if applicable): Connect to the terminal labeled "MV" or "PUMP".
Connexió d'alimentació:
Plug the power adapter into the timer's power input port, then plug the adapter into a standard electrical outlet. The timer display should illuminate.
Rain Catch Cup Installation:
The included rain catch cups are used to measure precipitation and help calibrate your sprinkler system for optimal water efficiency. Distribute the 12 cups evenly across your lawn or garden areas, ensuring they are placed in open spaces away from obstructions like trees or buildings that might block rain or sprinkler spray.
- Insert the green stake into the ground until the cup is stable and upright.
- Ensure the top of the cup is level with the ground for accurate measurement.
Instruccions de funcionament
Initial Setup and WiFi Connection:
- Download the "B-hyve" app from the Apple App Store or Google Play Store.
- Create an account and follow the in-app instructions to add your new B-hyve timer.
- The app will guide you through connecting the timer to your home WiFi network.
Horaris de programació:
The B-hyve system offers flexible programming options via the app or directly on the timer.
- Reg intel·ligent: Utilize the app's smart watering feature, which uses local weather data to automatically adjust watering schedules.
- Programes manuals: Create custom watering schedules with specific start times, run times, and days of the week for each zone.
- Retard per la pluja: Use the "RAIN DELAY" button on the timer or the app to pause watering for a set period (24, 48, or 72 hours) in anticipation of rain.
Funcionament manual:
You can manually run a single zone or all zones directly from the timer or the app.
- Temporitzador activat: Navigate to "MANUAL" using the dial, select the zone(s) and desired run time, then press "START".
- Mitjançant l'aplicació: Select the desired zone(s) and initiate a manual run from the app interface.
Manteniment
- Neteja: Netegeu periòdicament l'exterior del temporitzador amb anuncis.amp drap. No utilitzeu productes de neteja abrasius ni submergiu la unitat en aigua.
- Hivernització: In freezing climates, disconnect the timer from power and drain all water from the system to prevent freeze damage to pipes and valves. Store the timer indoors during winter months.
- Rain Catch Cups: Regularly empty and clean the rain catch cups to ensure accurate readings. Remove any debris that may accumulate inside.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La pantalla del temporitzador està en blanc. | No power or power adapter issue. | Check power outlet, ensure adapter is securely connected. |
| Zona sense reg. | Wiring issue, faulty valve, or low water pressure. | Verify wiring connections, check valve operation, ensure main water supply is on. |
| No es pot connectar a la xarxa Wi-Fi. | Incorrect WiFi password, weak signal, or router issue. | Double-check password, move timer closer to router, restart router. |
| Rain delay not working. | Incorrect setting or system override. | Ensure rain delay is active and not overridden by a manual run. |
Especificacions
- Model: 57950
- Marca: Òrbita
- Nombre d'estacions: 12
- Connectivitat: WiFi (2.4 GHz)
- Material: Plàstic
- Color: Blanc
- Indoor/Outdoor Rating: Sí
- UPC: 816602020007
- ASIN: B06XT21KD7
Informació de la garantia
Orbit products are manufactured to high quality standards. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official Orbit weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
Atenció al client
For technical assistance, troubleshooting, or general inquiries, please contact Orbit customer support:
- Weblloc: www.orbitanline.com
- Telèfon: Consulteu l'embalatge del producte o weblloc web per obtenir els números de contacte més actuals.
- Suport de l'aplicació: Many common issues can be resolved through the B-hyve app's help section.





