1. Producte acabatview
The Valore 7 shower panel is designed for retrofit installation into existing shower systems that include a cold and hot faucet. It connects to an existing shower head spout. The panel body is constructed from durable 304 stainless steel, offering a modern aesthetic for bathroom upgrades.
This shower panel features a 3-way shower spray mode system, allowing for versatile water delivery options. It includes a brass shower wand with a brass shower cradle for handheld use.
Image 1.1: Valore 7 Shower Panel installed in a modern bathroom setting.
2. Informació de seguretat
- Assegureu-vos que totes les línies de subministrament d'aigua estiguin tancades abans de començar la instal·lació.
- Utilitzeu equips de protecció individual adequats, com ara ulleres i guants de seguretat, durant la instal·lació.
- Si teniu dubtes sobre alguna part del procés d'instal·lació, consulteu un lampista qualificat.
- Do not use abrasive cleaners or harsh chemicals on the shower panel's surface, as this may damage the finish.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- Unitat de panell de dutxa
- Cap de dutxa
- Shower Wand (Handheld Shower)
- Shower Cradle for Handheld Shower
- Maquinari de muntatge
- Flexible Hoses for Water Connection
- Manual d'instal·lació
4. Especificacions
| Característica | Especificació |
|---|---|
| Marca | Valore |
| Número de model | 32c8f765-6d09-4293-9210-40320453c0bb |
| Color | Acer inoxidable raspallat |
| Material | Llautó, acer inoxidable |
| Tipus d'acabat | Raspallat |
| Nombre de nanses | 3 |
| Tipus de muntatge | Muntatge de paret |
| Pes de l'article | 14.02 lliures |
| Certificacions | UPC/c-UPC certified |
5. Dimensions
Refer to the diagram below for detailed product dimensions.
Image 5.1: Valore 7 Shower Panel Dimensions Diagram. All measurements are approximate.
6. Instruccions d'instal·lació
The Valore 7 shower panel is designed for easy retrofit installation. It connects to your existing shower head spout and hot/cold water lines.
6.1 Preinstal·lació
- Tanqueu el subministrament d'aigua: Locate and turn off the main water supply to your bathroom or entire home.
- Remove Existing Fixtures: Carefully remove your current shower head and any other fixtures that will be replaced by the shower panel.
- Inspect Plumbing: Ensure your existing hot and cold water lines are accessible and in good condition. This panel is designed for systems with existing hot and cold faucets.
- Water-Saving Regulator: If your water pressure is naturally low, consider not installing any water-saving regulator that may be included with the panel, as it can further reduce flow. If you use the hang-on to the shower pipe method, access to the regulator may be limited after installation.
6.2 Muntatge del panell
- Posicionament: Hold the shower panel against the wall in the desired position. Mark the locations for mounting brackets. Ensure the panel is level.
- Forats: Perforeu forats pilot als llocs marcats. Inseriu ancoratges de paret si cal.
- Suports segurs: Fixeu els suports de muntatge a la paret amb els cargols proporcionats.
- Panel Attachment: The unit may include double-sided tape for securing it to the wall. Once applied, repositioning is difficult without replacing the tape. Carefully align and press the panel onto the brackets and tape.
6.3 Connecting Water Lines
- Connecteu les mànegues: Attach the flexible hot and cold water supply hoses from the shower panel to your existing hot and cold water outlets. Ensure all connections are tight to prevent leaks.
- Dutxa de mà: Connect the handheld shower hose to its designated outlet on the panel.
- Engegar l'aigua: Slowly turn the main water supply back on and check for any leaks. Tighten connections as needed.
- Seal Edges (Optional but Recommended): Apply a bead of clear silicone caulk along the sides of the shower panel where it meets the tile to create a seal and prevent water intrusion.
Note: This shower panel does not include a temperature/volume control valve. Your existing shower valve will control water temperature and flow.
7. Instruccions de funcionament
The Valore 7 shower panel features a 3-way diverter to control water flow to different functions.
7.1 Control del cabal d'aigua
Use your existing shower's hot and cold water handles to adjust the desired water temperature and overall flow rate.
7.2 Selecting Spray Modes
The panel has a control knob or lever to switch between the three spray modes:
- Pluja de pluja: Provides a wide, gentle rainfall-like spray from the overhead shower head.
- Jets corporals: Delivers targeted streams of water from the integrated body massage jets.
- Dutxa de mà: Directs water flow to the brass shower wand for focused rinsing or cleaning.
Image 7.1: Valore 7 Shower Panel demonstrating the rain shower function.
Image 7.2: Valore 7 Shower Panel demonstrating the body jet function.
Rotate or move the diverter control to select your desired spray function. Only one function can be active at a time.
8. Manteniment
8.1 Neteja
- Clean the stainless steel surface regularly with a soft cloth and mild soap or a non-abrasive stainless steel cleaner.
- Avoid using abrasive sponges, scouring pads, or harsh chemical cleaners, as these can scratch or damage the finish.
- Per a taques d'aigua dura, feu servir una solució de vinagre blanc i aigua i després esbandiu-les bé.
- Periodically clean the nozzles of the shower head and body jets to remove mineral buildup. You can often do this by gently rubbing the rubber nozzles.
8.2 Atenció general
- Ensure all connections remain tight to prevent leaks.
- If any part becomes loose, gently tighten it. Do not overtighten.
9. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Baixa pressió d'aigua | Water-saving regulator installed; mineral buildup in nozzles; low household water pressure. | Check if a water-saving regulator is installed and consider removing it if pressure is consistently low. Clean shower head and body jet nozzles. Consult a plumber if household pressure is generally low. |
| Fuites a les connexions | Loose connections; worn washers/gaskets. | Ensure all hose connections are securely tightened. Check and replace any damaged washers or gaskets. |
| El desviador no commuta les funcions | Acumulació de minerals; problema de mecanisme intern. | Flush the system by running water through all functions. If the issue persists, contact customer support. |
10. Garantia i Suport
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Valore customer service. Keep your proof of purchase for warranty claims.
