Bunn FPG-2 DBC French Press Grinder User Manual

1. Introducció

This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your Bunn FPG-2 DBC French Press Grinder. This commercial-grade grinder is designed for precise portion control and features dual 3 lb. hoppers, multi-batch settings, a digital touchpad, and an LCD readout, making it ideal for various coffee grinding needs, including French Press.

This image shows the Bunn FPG-2 DBC French Press Grinder. It features a stainless steel base with a control panel, topped by two clear hoppers for coffee beans. One hopper contains dark roasted beans, and the other contains lighter roasted beans, indicating its dual hopper capability.

2. Instruccions de seguretat

Please read all safety instructions carefully before operating the grinder to prevent injury or damage to the unit.

• Seguretat elèctrica: Ensure the grinder is connected to a properly grounded electrical outlet with the correct voltage (120V/60/1, 4amps, NEMA 5-15P). Do not operate with a damaged cord or plug.
• Parts mòbils: Keep hands, hair, and clothing away from moving parts during operation. Never insert fingers or utensils into the grinding chamber or hoppers while the machine is running.
• Superfícies calentes: The motor and grinding components may become hot during prolonged use. Allow the unit to cool before cleaning or performing maintenance.
• Neteja: Disconnect power before cleaning. Do not immerse the grinder in water or other liquids. Use a damp drap per a la neteja exterior.
• Supervisió: Aquest aparell no està pensat per a persones amb capacitats físiques, sensorials o mentals reduïdes, o amb manca d'experiència i coneixements, llevat que hagin rebut supervisió o instruccions sobre l'ús de l'aparell per part d'una persona responsable de la seva seguretat.
• Ús previst: Use this grinder only for grinding whole roasted coffee beans. Do not attempt to grind other substances.

3. Configuració

1. Desembalatge: Carefully remove the grinder from its packaging. Retain packaging for future transport or storage.
2. Col·locació: Place the grinder on a stable, level, and dry surface. Ensure adequate ventilation around the unit.
3. Instal·lació de la tremuja: Ensure the dual hoppers are securely seated on top of the grinder.
4. Connexió d'alimentació: Connecteu el cable d'alimentació a una presa de corrent de 120 V/60 Hz amb connexió a terra.
5. Neteja inicial: Abans del primer ús, netegeu l'exterior amb anunciamp cloth. Run a small amount of sacrificial coffee beans through the grinder to season the burrs and remove any manufacturing residue. Discard these initial grounds.

4. Instruccions de funcionament

1. Fill Hoppers: Lift the hopper lids and fill each hopper with whole roasted coffee beans. The grinder features dual 3 lb. hoppers.
2. Select Hopper: Use the digital touchpad to select which hopper (left or right) you wish to grind from.
3. Ajusta la configuració de la mòlta: The FPG-2 DBC is designed for French Press grind. If adjustable, use the grind adjustment knob (if present, typically located near the grinding chamber) to fine-tune the coarseness. Refer to the LCD readout for current settings.
4. Set Batch Size: Utilize the multi-batch settings via the digital touchpad to select the desired portion size. The LCD readout will display the selected batch.
5. Position Container: Place your coffee container or French Press funnel under the grinding chute. The grinder is designed to accept a gourmet funnel.
6. Comença a triturar: Press the grind button on the digital touchpad. The grinder will automatically dispense the selected portion of coffee grounds.
7. Repetiu: Repeat steps as needed for additional batches.

Nota: For optimal performance and consistent grind, ensure hoppers are not overfilled and burrs are clean.

5. Manteniment

Regular cleaning and maintenance will ensure the longevity and optimal performance of your grinder.

• Neteja diària:
  • Desconnecteu el molinet.
  • Brush away any loose coffee grounds from the grinding chute and surrounding areas using a soft brush.
  • Netegeu les superfícies exteriors amb adamp tela. No utilitzeu netejadors abrasius.
• Neteja setmanal (o segons calgui):
  • Desconnecteu el molinet.
  • Empty the hoppers of any remaining coffee beans.
  • Remove the hoppers and clean them with warm, soapy water. Rinse thoroughly and dry completely before reattaching.
  • Access the grinding burrs (refer to specific model instructions for burr removal if necessary) and clean them with a stiff brush or vacuum to remove built-up coffee oils and fine particles.
  • Torneu a muntar totes les peces de manera segura.
• Burr Replacement: Over time, grinding burrs will wear down. Consult the manufacturer's guidelines or a qualified service technician for burr inspection and replacement.

6. Solució De Problemes

7. Especificacions

8. Garantia i Suport

For information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official BUNN website. For technical support, parts, or service inquiries, please contact BUNN customer service directly.

BUNN Official Weblloc: www.bunn.com