Producte acabatview
The Klein Tools ET05 is a digital thermometer designed for ambient and direct-contact temperature readings. It supports both Fahrenheit (F) and Celsius (C) scales, making it versatile for various applications, particularly in HVAC field service. Its rugged and portable design, along with a protective sheath that doubles as an extended handle, ensures durability and ease of use in professional environments.
Image: Klein Tools ET05 Digital Pocket Thermometer with its protective sheath.
Informació de seguretat
Before each use, it is crucial to read, understand, and follow all instructions, cautions, and warnings provided with the Klein Tools ET05 Digital Pocket Thermometer. This thermometer is NO intended for use on people or animals. Always prioritize safety when operating any test and measurement device.
Configuració
The Klein Tools ET05 Digital Pocket Thermometer comes ready for use with included batteries. Follow these steps for initial setup:
- Desempaqueta el termòmetre: Carefully remove the thermometer and its protective sheath from the packaging.
- Battery Installation (if not pre-installed): The thermometer requires two LR44 batteries. If they are not already installed, locate the battery compartment, typically on the back or side of the device, and insert the batteries according to the polarity markings.
- Attach Protective Sheath: The protective sheath can be used to cover the probe when not in use or extended to serve as a handle for increased reach during measurements. Ensure it is securely attached or removed as needed.
Image: The Klein Tools ET05 thermometer with its probe extended, alongside its protective sheath.
Instruccions de funcionament
The ET05 thermometer is designed for straightforward operation. Here's how to use its main features:
Encès/Apagat
- Per encendre, premeu el botó Botó d'encesa.
- El dispositiu té una funció d'apagada automàtica després de 15 minuts d'inactivitat per estalviar bateria.
Mesura de la temperatura
- Extend the probe from its protective sheath.
- Place the probe in direct contact with the substance or within the environment you wish to measure.
- The digital display will show the temperature reading. The thermometer has a wide measurement range of -40 to 482°F (-40 to 250°C).
Image: A hand holding the Klein Tools ET05 thermometer, measuring temperature in an industrial setting.
Image: The Klein Tools ET05 thermometer being used to measure the temperature inside an HVAC vent.
Fahrenheit/Celsius Selection
- Premeu el botó Botó °F/°C to toggle between Fahrenheit and Celsius units.
Advanced Functions (Max/Min, Hold, Average)
- MANTENIR: Premeu el botó botó HOLD to freeze the current temperature reading on the display. Press again to resume live readings.
- MÀX/MÍN/MITJANA: Premeu el botó Botó MÀX/MÍN/MITJANA to cycle through the maximum, minimum, and average temperature readings recorded during a measurement session.
Image: A graphic highlighting the features of the Klein Tools ET05, including its temperature range, backlit LCD display, and MAX/MIN/AVG functions.
Manteniment
Proper maintenance ensures the longevity and accuracy of your Klein Tools ET05 Digital Pocket Thermometer:
- Neteja: Wipe the thermometer clean with a damp cloth. Do not submerge the device in water or use abrasive cleaners.
- Emmagatzematge: When not in use, store the thermometer with the probe retracted into its protective sheath. Keep it in a dry environment, away from extreme temperatures and direct sunlight.
- Substitució de la bateria: If the display becomes dim or the device does not power on, replace the two LR44 batteries. Ensure correct polarity.
Resolució de problemes
If you encounter issues with your ET05 thermometer, try the following common troubleshooting steps:
- Sense pantalla/Pantalla atenuada:
- Comproveu l'orientació de la bateria.
- Replace batteries with fresh LR44 cells.
- Lectures inexactes:
- Assegureu-vos que la sonda estigui neta i lliure de residus.
- Verify the probe is in proper contact with the measurement area.
- Allow the thermometer to stabilize in the environment before taking a reading.
- El dispositiu no respon:
- Remove and reinsert batteries to perform a soft reset.
If problems persist after attempting these steps, please refer to the support information provided in the Warranty and Support section.
Especificacions
| Característica | Detall |
|---|---|
| Número de model | ET05 |
| Marca | EINES KLEIN |
| Interval de mesura | -40 a 482 °F (-40 a 250 °C) |
| Accuracy (Room Temp) | +/- 27 °F (+/- 15 °C) |
| Tipus de visualització | Digital, retroil·luminat |
| Font d'alimentació | 2 piles LR44 (incloses) |
| Apagat automàtic | Després de 15 minuts |
| Característiques especials | Max/Min, Hold, Average functions, Pocket Clip |
| Dimensions del producte | 1.08 x 0.94 x 6.5 polzades |
| Pes de l'article | 1.4 unces |
| Material | Stainless Steel (probe) |
| Components inclosos | Pocket Thermometer; 2 x LR44 Batteries |
Garantia i Suport
For warranty information or technical support regarding your Klein Tools ET05 Digital Pocket Thermometer, please refer to the official Klein Tools website or contact their customer service. A detailed Instructions for Use (IFU) document is available for download:
Descarrega les instruccions d'ús (PDF)
També podeu visitar l'oficial KLEIN TOOLS Store on Amazon per obtenir més informació sobre el producte i recursos d'assistència.
