Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your hykolity 4FT LED Shop Light. Please read this manual thoroughly before installation and retain it for future reference.
Informació de seguretat
- Desconnecteu sempre l'alimentació a l'interruptor automàtic abans de la instal·lació o el manteniment.
- Assegureu-vos el subministrament voltage is compatible with the fixture (100-277V).
- No mireu directament a la font de llum LED.
- Aquest producte està dissenyat només per a ús interior.
- If you are unsure about the installation, consult a qualified electrician.
Contingut del paquet
Each hykolity 4FT LED Shop Light package includes the following items:
- LED Shop Light Fixture (4 units per pack)
- Cadenes penjants
- Cargols de muntatge
- Ancores de plàstic
- Power Cord with Pull Chain Switch
- Ganxos en J
Figura 1: Accessoris inclosos i dimensions del producte.
Especificacions
| Característica | Detall |
|---|---|
| Model | HBSP-MB4F-50K |
| Wattage | 42W |
| Brillantor | 4400 lúmens |
| Temperatura de color | 5000K blanc llum diürna |
| Voltage | 100-277V |
| Vida útil | 50,000 hores |
| Dimensions (L x A x A) | 48" x 5.4" x 2.24" |
| Material | Plàstic |
| Característiques especials | Shatter Resistant, Linkable (up to 6 units) |
| Certificacions | Certificat ETL |
| Ús interior/exterior | Interior |
Instal·lació
The hykolity LED Shop Light offers two primary installation methods: hanging mount and surface mount. Both methods are designed for quick and easy setup.
1. Instal·lació del suport penjant
- Locate suitable mounting points on your ceiling or overhead structure. Ensure these points can support the weight of the fixture.
- Screw the provided J-hooks into the ceiling at the desired locations.
- Attach the hanging chains to the J-hooks and then to the designated attachment points on the light fixture. Adjust the chain length to achieve the desired hanging height.
- Connecteu el cable d'alimentació a una presa de corrent compatible.
2. Instal·lació de muntatge superficial
- Mark the desired mounting locations on the ceiling or wall. Use the light fixture as a template to ensure correct spacing for the mounting screws.
- Drill pilot holes at the marked locations. Insert plastic anchors if mounting into drywall.
- Secure the light fixture to the ceiling or wall using the provided mounting screws.
- Connecteu el cable d'alimentació a una presa de corrent compatible.
Figure 2: Quick and easy installation methods.
Funció enllaçable
These shop lights are designed to be linkable, allowing you to connect up to 6 units together using the integrated plug connection. This feature is ideal for illuminating larger areas such as garages, workshops, or warehouses with a single power source.
Figure 3: Detail of the pull chain switch and linkable design.
Video 1: Official Hykolity video demonstrating the unboxing, installation, and features of the 42W LED Shop Light, including its linkable design and flicker-free operation.
Instruccions de funcionament
The hykolity LED Shop Light is designed for simple operation. Once installed and plugged in, use the integrated pull chain switch to control the light.
- Activar/Desactivar: Pull the chain once to turn the light on. Pull it again to turn it off.
- Linkable Operation: If multiple units are linked, pulling the chain on the primary unit will control all connected lights simultaneously.
Manteniment
- Neteja: Ensure the fixture is unplugged before cleaning. Wipe the surface with a soft, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Substitució de bombetes: The LED light source is integrated and designed for a long lifespan (50,000 hours), requiring no bulb replacement under normal use.
- Inspecció: Periodically check the power cord and hanging chains for any signs of wear or damage. Replace if necessary.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | Sense font d'alimentació. Pull chain switch not activated. | Comproveu si el cable d'alimentació està ben connectat. Verify the circuit breaker is on. Pull the chain switch firmly. |
| La llum parpelleja. | Connexió fluixa. Incompatible dimmer switch (not recommended). | Assegureu-vos que totes les connexions siguin segures. This fixture is not designed for use with dimmer switches. |
| La llum és tènue. | Acumulació de pols. | Clean the light fixture as per maintenance instructions. |
Garantia i Suport
The hykolity 4FT LED Shop Light is confidently guaranteed for 5 anys from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims, technical support, or any inquiries, please contact hykolity customer service.
For more information, visit the official hykolity store: hykolity Store
Aplicacions recomanades
The hykolity 4FT LED Shop Light is versatile and suitable for a variety of indoor environments requiring bright, efficient lighting:
- Garatges
- Tallers
- Workbench Areas
- Àrees d'emmagatzematge
- Magatzems
- Soterranis
- Equipment Rooms
- Oficines
Figura 4: Examples of suitable applications for the LED shop light.
Beneficis clau
- Super brillant: Delivers 4400 lumens at 5000K Daylight White, providing excellent illumination.
- Eficient energètic: Uses only 42W, offering a 70% reduction in energy usage compared to traditional fluorescent fixtures.
- Llarga durada: Rated for 50,000 hours of maintenance-free light.
- Sense parpelleig: Provides stable and consistent lighting without annoying flicker.
- Durador: ETL certified for quality and reliability, featuring a shatter-resistant design.
Figure 5: Comparison highlighting the brightness and flicker-free performance.
