Introducció
This manual provides instructions for the installation, operation, and maintenance of the Black Box SERVSWITCH EC USB Server Cable, Model EHN9000U-0006. This 6-foot (1.8-meter) cable is designed to connect a server to a KVM switch, providing both USB and VGA connectivity.
Informació de seguretat
Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in damage to the product or connected equipment.
- Do not expose the cable to excessive moisture or extreme temperatures.
- Eviteu doblegar o torçar el cable bruscament, ja que això pot danyar els cables interns.
- Ensure all connections are secure before powering on equipment.
- Disconnect power from devices before connecting or disconnecting cables.
Contingut del paquet
Verifiqueu que el vostre paquet conté el següent article:
- 1 x Black Box SERVSWITCH EC USB Server Cable (EHN9000U-0006)
Producte acabatview
The Black Box SERVSWITCH EC USB Server Cable is a specialized cable designed for KVM (Keyboard, Video, Mouse) applications. It integrates VGA video and USB keyboard/mouse signals into a single cable for streamlined connectivity between a server and a KVM switch.
Imatge: Black Box SERVSWITCH EC USB Server Cable. This image displays the 6-foot cable with its distinct VGA (HD-15) and USB connectors, designed for server-to-KVM switch connections.
Característiques principals:
- Connectivitat integrada: Combines VGA video and USB data into one cable.
- Longitud: 6 feet (1.8 meters) for flexible placement.
- Compatibilitat: Designed for use with Black Box SERVSWITCH KVM systems.
- Disseny sense embussos: Helps prevent tangles and simplifies cable management.
Configuració
- Apagueu els dispositius: Ensure both the server and the KVM switch are powered off before making any connections.
- Connect to Server: Locate the VGA output port and an available USB port on your server. Connect the corresponding VGA (HD-15 male) and USB (Type-A male) connectors of the EHN9000U-0006 cable to these ports on the server.
- Connect to KVM Switch: Locate the KVM port on your KVM switch designated for the server. Connect the combined VGA (HD-15 female) and USB (Type-A female) end of the EHN9000U-0006 cable to the KVM switch's input port. Ensure a secure fit for both connectors.
- Encès: Once all connections are secure, power on the KVM switch, then power on the server.
En funcionament
Once the cable is properly connected and devices are powered on, the KVM switch should detect the connected server. Use the KVM switch's controls (buttons, hotkeys, or OSD) to switch to the server connected via this cable. You should then have control over the server's video, keyboard, and mouse.
- Refer to your KVM switch's user manual for specific instructions on switching between connected servers.
- Ensure the KVM switch is configured to recognize the USB keyboard and mouse signals.
Manteniment
The Black Box SERVSWITCH EC USB Server Cable requires minimal maintenance. Follow these guidelines to ensure longevity:
- Neteja: Feu servir un drap suau i sec per netejar el cable i els connectors. No utilitzeu netejadors líquids ni dissolvents.
- Emmagatzematge: When not in use, store the cable in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tight coiling to prevent internal damage.
- Manipulació: Always grasp the connector housing when plugging or unplugging the cable. Avoid pulling on the cable itself.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No hi ha pantalla de vídeo | Loose VGA connection; Incorrect KVM port selected; Server video output issue. | Ensure VGA connectors are fully seated and secured. Select the correct KVM port. Check server's video output directly. |
| El teclat/ratolí no respon | Loose USB connection; KVM switch USB emulation issue; Server USB port issue. | Ensure USB connectors are fully seated. Verify KVM switch USB settings. Test server USB ports with another device. |
| Connectivitat intermitent | Damaged cable; Loose connections; Electrical interference. | Inspect cable for visible damage. Re-seat all connections. Ensure cable is not near strong electromagnetic sources. |
Especificacions
- Model: EHN9000U-0006
- Marca: Caixa Negra
- Tipus de cable: USB, VGA
- Connector Type (Server End): HD-15 Male (VGA), USB Type-A Male
- Connector Type (KVM End): HD-15 Female (VGA), USB Type-A Female
- Longitud: 6 peus (1.8 metres)
- Color: Negre/vermell
- Característica especial: Sense enredos
- Dispositius compatibles: Server (with VGA and USB ports)
- Dimensions del producte: 5 x 0.5 x 5 polzades (dimensions aproximades de l'embalatge)
- Pes de l'article: 8.4 unces (0.24 quilograms)
- UPC: 822088018322
Garantia i Suport
For warranty information and technical support, please refer to the official Black Box weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra per a reclamacions de garantia.
Caixa Negra Weblloc: www.blackbox.com
