1. Introducció
Thank you for choosing the Hansa Basic Jet 3-Jet Shower/Hand Shower. This manual provides essential information for the safe installation, operation, and maintenance of your new shower head. Please read these instructions carefully before use and retain them for future reference.
The Hansa Basic Jet is designed to provide a versatile showering experience with three distinct spray modes and a durable chrome finish.
Image 1.1: The Hansa Basic Jet 3-Jet Shower/Hand Shower, showcasing its chrome finish and nozzle design.
2. Informació de seguretat
Si us plau, observeu les següents pautes de seguretat per evitar lesions o danys al producte:
- Assegureu-vos que totes les connexions siguin segures i estanques per evitar fuites.
- Do not use abrasive cleaners or solvents on the shower head, as this may damage the finish.
- Tanqueu sempre el subministrament principal d'aigua abans d'intentar qualsevol instal·lació o manteniment.
- Si no esteu segurs sobre algun dels passos d'instal·lació, consulteu un lampista qualificat.
- The maximum operating temperature for this product is 60°C (140°F).
3. Contingut del paquet
Verifiqueu que tots els components siguin presents al paquet:
- Hansa Basic Jet 3-Jet Shower/Hand Shower (Model 44630300)
- Manual d'instruccions
Note: The shower hose and wall bracket are typically sold separately.
4. Configuració i instal·lació
Follow these steps to install your Hansa Basic Jet Shower/Hand Shower:
- Prepareu l'àrea d'instal·lació: Assegureu-vos que el subministrament principal d'aigua de la dutxa estigui tancat.
- Remove Old Shower Head (if applicable): Unscrew your existing shower head from the shower hose.
- Connect the New Shower Head: The Hansa Basic Jet features a standard G 1/2 hose connection. Screw the new shower head onto your existing shower hose. Hand-tighten first, then use a wrench to gently tighten, ensuring not to overtighten.
- Comproveu si hi ha fuites: Turn on the main water supply and check all connections for any leaks. If leaks occur, tighten the connection slightly more.
Image 4.1: Isometric view of the shower head, illustrating the G 1/2 hose connection point at the base of the handle.
5. Instruccions de funcionament
Your Hansa Basic Jet Shower/Hand Shower offers three distinct spray modes for a customized showering experience. To switch between modes, gently rotate the spray plate on the shower head.
- Mode relaxant: Provides a soft, wide spray for a gentle and soothing shower.
- Refreshing Mode: Delivers a more focused and invigorating spray, ideal for rinsing.
- EcoFlow Mode: Designed to reduce water consumption while maintaining an effective spray.
Image 5.1: The Hansa Basic Jet shower head in operation, demonstrating a typical spray pattern.
6. Manteniment
Regular cleaning and maintenance will ensure the longevity and optimal performance of your shower head.
Neteja del capçal de la dutxa
- Neteja diària: Wipe the shower head with a soft, damp drap després de cada ús per evitar taques d'aigua i acumulació de restes de sabó.
- Limescale Removal: The Hansa Basic Jet features anti-limescale technology. For stubborn limescale deposits, gently rub the silicone nozzles to dislodge mineral buildup.
- Neteja profunda: For a more thorough clean, use a mild soap solution or a specialized bathroom cleaner designed for chrome finishes. Apply with a soft cloth, rinse thoroughly with water, and dry immediately to prevent water spots.
- Evitar: Do not use abrasive sponges, scouring pads, or harsh chemical cleaners (e.g., bleach, ammonia-based products) as these can damage the chrome finish and plastic components.
7. Solució De Problemes
Si teniu problemes amb el capçal de la dutxa, consulteu els següents problemes i solucions habituals:
| Problema | Causa possible | Solució |
|---|---|---|
| Baix cabal d'aigua | Clogged nozzles due to limescale; low water pressure from supply. | Clean the nozzles by rubbing them. Check your home's water pressure. Ensure the minimum flow rate of 9 L/min is met. |
| Patró de polvorització irregular | Blocked nozzles. | Clean the nozzles thoroughly to remove any blockages. |
| Leaks at hose connection | Connexió fluixa; volandera desgastada. | Tighten the hose connection. Replace the washer if it appears damaged. |
8. Especificacions
Detailed technical specifications for the Hansa Basic Jet Shower/Hand Shower:
- Número de model: 44630300
- Marca: Hansa
- Material: Plastic (Composite)
- Acabat: Chrome
- Diàmetre del cap: 95 mm
- Connexió de la mànega: G 1/2
- Number of Spray Modes: 3 (Relaxing, Refreshing, EcoFlow)
- Caudal: 14 L/min (at 3 bar flow pressure)
- Caudal mínim recomanat: 9 L/min
- Dimensions del producte: 3.74 x 3.74 x 8.66 polzades
- Pes de l'article: 5.3 unces
- Característiques especials: Eco flow control, Anti-limescale technology
Image 8.1: Technical drawing illustrating the dimensions (diameter 95mm, length 180mm) and G 1/2 hose connection of the Hansa Basic Jet shower head.
9. Garantia i Suport
For information regarding warranty terms and conditions, please refer to the documentation provided at the time of purchase or visit the official Hansa website. If you require technical assistance or have questions not covered in this manual, please contact Hansa customer support.
