1. Introducció
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Kaysun Aquatix 8 kW Pool Heat Pump, model KSWP-80 Hn. Please read this manual thoroughly before installation or use to ensure proper function and to prevent damage or injury. Keep this manual for future reference.
2. Informació de seguretat
Instruccions importants de seguretat:
- Installation and electrical connections must be performed by a qualified professional in accordance with all local and national codes.
- Ensure the power supply matches the specifications of the heat pump.
- Do not operate the unit if any part is damaged or if the power cord is frayed.
- Mantingueu els nens i les mascotes allunyats de la unitat durant el funcionament.
- Do not insert objects into the fan grille or any openings.
- Assegureu-vos una ventilació adequada al voltant de la unitat.
- Desconnecteu l'alimentació abans de realitzar qualsevol manteniment o reparació.
- Aquest aparell no està pensat per ser utilitzat per persones (inclosos nens) amb capacitats físiques, sensorials o mentals reduïdes, o amb manca d'experiència i coneixements, tret que hagin rebut la supervisió o instruccions sobre l'ús de l'aparell per una persona responsable de la seva seguretat.
3. Producte acabatview
The Kaysun Aquatix 8 kW Pool Heat Pump is designed to efficiently heat swimming pool water, extending your swimming season. It utilizes ambient air to transfer heat to your pool, offering an energy-efficient heating solution.
Figure 1: Kaysun Aquatix 8 kW Pool Heat Pump KSWP-80 Hn. This image shows the compact, rectangular outdoor unit of the heat pump, typically white or light grey, with a fan grille on one side and a control panel on the front. Water inlet/outlet connections are usually located on the side or back.
Components clau:
- Evaporador: Absorbs heat from the ambient air.
- Compressor: Increases the temperature and pressure of the refrigerant.
- Condensador: Transfers heat from the refrigerant to the pool water.
- Expansion Valve: Reduces the pressure and temperature of the refrigerant.
- Tauler de control: For setting temperature, operating modes, and displaying status.
4. Configuració i instal·lació
Professional installation by a certified technician is highly recommended to ensure safety and optimal performance.
- Ubicació: Choose a well-ventilated outdoor location, away from direct sunlight, with sufficient clearance around the unit for airflow (typically 50cm on all sides and 100cm above). Avoid enclosed spaces or areas where exhaust air can be recirculated.
- Muntatge: Place the unit on a solid, level base that can support its weight and minimize vibration.
- Connexions de fontaneria: Connect the heat pump to your pool's filtration system after the filter and before any chemical feeders. Ensure proper water flow direction. Use appropriate PVC fittings and sealants.
- Connexions elèctriques: Connect the unit to a dedicated electrical circuit with appropriate overcurrent protection (circuit breaker) as specified in the technical specifications. All wiring must comply with local electrical codes.
- Posada en marxa inicial: After all connections are secure and checked, ensure the pool pump is running and water is flowing through the heat pump before turning on the electrical supply to the unit.
5. Instruccions de funcionament
Ensure your pool pump is running before operating the heat pump.
- Encès/apagat: Use the main power switch on the unit or the control panel to turn the heat pump on or off.
- Configuració de la temperatura: Use the UP/DOWN arrows or temperature setting buttons on the control panel to adjust your desired pool water temperature. The display will show the current and set temperatures.
- Modes de funcionament: Your heat pump may have different operating modes (e.g., Heating, Cooling, Auto). Refer to the control panel interface for specific mode selection.
- Calefacció inicial: It may take 24-72 hours to reach the desired temperature, depending on pool size, ambient temperature, and initial water temperature. Keep the pool covered when not in use to minimize heat loss.
6. Manteniment
Un manteniment regular garanteix un rendiment òptim i allarga la vida útil de la bomba de calor.
- Neteja les bobines: Periodically inspect and clean the evaporator coils to remove leaves, dirt, and debris. A soft brush or garden hose can be used. Ensure power is off before cleaning.
- Flux d'aire clar: Keep the area around the heat pump clear of obstructions to ensure proper airflow.
- Química de l'aigua: Maintain proper pool water chemistry (pH, chlorine levels) to prevent corrosion and scale buildup in the heat exchanger.
- Hivernització: Before freezing temperatures, drain all water from the heat pump and plumbing lines to prevent freeze damage. Consult a professional for proper winterization procedures.
- Inspecció professional: Es recomana que un tècnic qualificat revisi la unitat anualment.
7. Solució De Problemes
Abans de contactar amb l'atenció al client, review aquests problemes i solucions comuns:
| Problema | Causa possible | Solució |
|---|---|---|
| La bomba de calor no s'encén | No power; tripped circuit breaker; unit switch off. | Check power supply, reset breaker, ensure unit switch is on. |
| Pool not heating sufficiently | Low ambient temperature; dirty coils; insufficient run time; low water flow. | Ensure coils are clean, allow more time, check pool pump and filter, verify water flow. |
| Es mostra el codi d'error | Error intern específic. | Note the error code and consult the full technical manual or contact a qualified technician. |
| Soroll inusual | Debris in fan; loose components; compressor issue. | Turn off power, inspect for debris, tighten loose parts. If noise persists, contact service. |
Per a problemes que no figuren aquí o si les solucions no resolen el problema, poseu-vos en contacte amb un tècnic de servei qualificat.
8. Especificacions
| Característica | Detall |
|---|---|
| Marca | KAYSUN |
| Model | KSWP-80 Hn |
| ASIN | B071YNJDKK |
| Fabricant | KAYSUN |
| Capacitat de calefacció | 8 kW |
| Volum de piscina recomanat | 40 - 60 m³ |
| Primera data disponible | 21 de febrer de 2020 |
9. Garantia i Suport
For warranty information, please refer to the warranty card included with your product or contact your authorized Kaysun dealer or the point of purchase. Keep your proof of purchase for warranty claims.
For technical support or service inquiries, please contact Kaysun customer service or your local distributor. Contact details can typically be found on the manufacturer's official weblloc web o a la documentació de la compra.
