Introducció
This instruction manual provides essential information for the proper setup, operation, and maintenance of your Timex Transcend 34mm Women's Analog Watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece.
Producte acabatview
The Timex Transcend watch combines a modern stylish design with reliable analog-quartz movement. It features a 34mm case diameter and a stainless steel mesh bracelet, offering both elegance and comfort. The watch is water-resistant to 30 meters (100 feet).
Configuració
Establiment de l'hora
- Localitza la corona al costat dret de la caixa del rellotge.
- Gently pull the crown outwards to position 2. You will feel a slight click.
- Gireu la corona en sentit horari o antihorari per ajustar les agulles de les hores i els minuts a l'hora correcta.
- Once the time is set, push the crown back into its original position (position 1) to start the watch movement.
Adjusting the Mesh Bracelet
The stainless steel mesh bracelet features an adjustable clasp for a comfortable fit. To adjust:
- Open the safety clasp and lift the main clasp lever.
- Using a small, flat tool (like a small screwdriver or a paperclip), gently pry open the locking plate on the clasp.
- Slide the clasp along the mesh band to the desired position. Ensure the clasp is centered on your wrist.
- Press the locking plate back down firmly until it clicks into place. Ensure it is securely fastened.
- Close the main clasp lever and then the safety clasp.
En funcionament
Your Timex Transcend watch is designed for reliable timekeeping. Once the time is set, the watch will operate continuously until the battery requires replacement.
Resistència a l'aigua
This watch is water resistant to 30 meters (100 feet). This means it can withstand splashes or brief immersion in water. It is no suitable for swimming, bathing, showering, or diving. Avoid operating the crown while the watch is wet to prevent water intrusion.
Manteniment
Canvi de bateria
The watch requires one CR2 battery (included). When the watch stops running, it indicates the battery needs replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.
Neteja
Per netejar el rellotge, netegeu la caixa i el braçalet amb un drap suau i sec.amp cloth. For the mesh bracelet, a soft brush can be used to gently remove dirt from the links. Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish.
Resolució de problemes
- El rellotge no funciona: Comproveu si la corona està completament empenta. Si ho està, potser cal substituir la pila.
- El temps és inexacte: Ensure the crown is fully pushed in after setting the time. If the issue persists, the battery may be low or the movement may require servicing.
- Bracelet feels loose/tight: Refer to the "Adjusting the Mesh Bracelet" section for instructions on how to resize the band.
Especificacions
| Característica | Detall |
|---|---|
| Marca | Timex |
| Número de model | TW2R361009J |
| Diàmetre de la caixa | 34 mm |
| Moviment | Analog-Quartz |
| Resistència a l'aigua | 30 m (100 peus) |
| Material | Llautó (caixa) |
| Material de la polsera | Malla d'acer inoxidable |
| Tipus de bateria | 1 bateria CR2 |
Garantia i Suport
Your Timex watch is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty details, registration, or to access customer support, please visit the official Timex weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el comprovant de compra per a reclamacions de garantia.
Per a més ajuda, podeu visitar el Botiga Timex a Amazon.
