1. Informació de seguretat
Please read and understand all instructions before installation and use. Failure to follow these instructions may result in property damage, serious injury, or death.
- Capacitat de pes: Do not exceed the maximum weight capacity of 17.6 lbs (8 kg) per arm. This mount is designed for monitors between 13 and 27 inches.
- Compatibilitat VESA: Ensure your monitors have VESA mounting patterns of 75x75mm or 100x100mm.
- Gruix de l'escriptori: Verify your desk thickness is compatible with the chosen mounting method (C-clamp: 0.39-2.36 inches / 10-60mm; Grommet: 0.39-2.56 inches / 10-65mm).
- Ajust de la molla de gas: Adjust the gas spring tension ONLY when a monitor is attached to the arm. Failure to do so may cause the arm to spring up rapidly, leading to injury.
- Muntatge: Some steps may require two people for safe assembly.
- Manteniment: Reviseu regularment tots els cargols i connexions per assegurar-vos que estiguin ben ajustats i segurs.
2. Contingut del paquet
Verify all parts are present and undamaged before proceeding with assembly. If any parts are missing or defective, contact HUANUO customer service.
| Part | Descripció |
|---|---|
| Pol principal | Vertical support pole for the monitor arms. |
| Monitor Arms (2) | Gas spring articulating arms for monitor attachment. |
| Plaques VESA (2) | Plates for attaching monitors to the arms (75x75mm/100x100mm). |
| Base de muntatge | Base for attaching the stand to the desk (supports C-clamp and Grommet). |
| C-Clamp / Grommet Hardware | Components for C-clamp o instal·lació d'oelles. |
| Clips de gestió de cables | Clips to organize cables along the arms and pole. |
| Eines i fixacions | Hex keys, screws, and washers for assembly. |
Descripció de la imatge: A person unboxes the HUANUO Dual Monitor Stand, displaying various components including the VESA plates, mounting hardware, cable clips, and the main pole. This image illustrates the comprehensive set of parts included for assembly.
3. Instruccions de configuració
Follow these steps carefully to assemble and install your HUANUO Dual Monitor Stand.
- Trieu el mètode de muntatge:
Decide between C-clamp or Grommet mounting based on your desk type and preference. Ensure your desk thickness is within the specified range for the chosen method.
Descripció de la imatge: This image shows two diagrams illustrating the C-clamp and Grommet mounting options for the monitor stand. The C-clamp is shown gripping the edge of a desk, while the Grommet mounting uses a hole in the desk surface.
- Muntar la base:
Attach the main pole to the chosen mounting base (C-clamp or Grommet). Secure all fasteners tightly using the provided tools.
- Fixeu les plaques VESA als monitors:
Place your monitor face down on a soft, clean surface. Attach a VESA plate to the back of each monitor using the appropriate screws and washers. Ensure the plate is securely fastened.
Descripció del vídeo: This video demonstrates the process of attaching the VESA plate to the back of a monitor. It shows how to align the plate with the monitor's mounting holes and secure it with screws, ensuring a stable connection for the monitor arm.
- Attach Arms to the Pole:
Slide the monitor arms onto the main pole at your desired initial height. Secure them in place with the locking mechanisms.
- Muntar els monitors als braços:
Carefully slide the monitors (with attached VESA plates) onto the ends of the monitor arms. Ensure they click securely into place. Tighten any safety screws if provided.
Descripció del vídeo: This video illustrates the final step of mounting the monitors onto the dual monitor stand arms. It shows how to carefully slide the VESA-mounted monitors onto the arm brackets and secure them, demonstrating the ease of installation.
4. Instruccions de funcionament
The HUANUO Dual Monitor Stand offers extensive adjustability for optimal viewcomoditat i productivitat.
- Ajust d'alçada:
The gas spring arms allow for smooth vertical height adjustment. To adjust, gently push or pull the monitor to the desired height. If the monitor does not stay in place, the gas spring tension may need adjustment (see below).
Descripció de la imatge: This image highlights the gas spring arm mechanism, showing how it allows for smooth and free height adjustment of the monitor. It illustrates the range of vertical movement and the internal gas spring system.
- Gas Spring Tension Adjustment:
If the monitor sags or springs up too easily, adjust the gas spring tension. Use the provided hex key to turn the adjustment screw on the arm. Turn clockwise to increase tension (for heavier monitors) or counter-clockwise to decrease tension (for lighter monitors). Adjust gradually until the monitor stays at any desired height.
Descripció del vídeo: This video demonstrates how to adjust the gas spring arm tension on the HUANUO HN-DSK1 dual monitor mount. It shows the use of a hex key to fine-tune the arm's resistance, ensuring the monitor remains stable at any height.
- Inclinació, gir i rotació:
Each monitor can be tilted (+85°/-90°), swiveled (±90°), and rotated (360°) to achieve the perfect viewing angle. Simply grasp the edges of the monitor and adjust as needed. The 360° rotation allows for easy switching between landscape and portrait modes.
Descripció de la imatge: This image illustrates the full motion capabilities of the monitor stand, including diagrams for 360° swivel, +85°/-90° tilt, and 360° rotation, allowing users to customize their screen angle for optimal viewing.
- Flexible Arm Extension:
The articulating arms can extend up to 64cm (25.2 inches) or retract to 41cm (16.1 inches), providing flexibility for various desk depths and viewing distances. This also allows for combining arms for shallow or deep desktop configurations.
Descripció de la imatge: This image demonstrates the flexible arm installation, showing two different configurations: one with a maximum extension of 41cm and another with a maximum extension of 64cm, suitable for various desktop setups.
- Gestió de cables:
Utilize the integrated cable management clips along the arms and pole to route and conceal monitor cables, maintaining a tidy and organized workspace.
5. Manteniment
Regular maintenance ensures the longevity and safe operation of your monitor stand.
- Comprovacions periòdiques: Every few months, check all screws and connections to ensure they are tight. Re-tighten if necessary.
- Neteja: Netegeu el suport amb un drap suauamp drap. Eviteu utilitzar netejadors abrasius o dissolvents que puguin danyar l'acabat.
- Molla de gas: The gas spring is designed for long-term use and generally does not require maintenance. If you notice a significant change in its performance, re-adjust the tension as described in the Operating Instructions.
6. Solució De Problemes
Si teniu algun problema, consulteu els següents problemes i solucions habituals:
| Problema | Solució |
|---|---|
| El monitor s'enfonsa o no es manté a l'alçada desitjada. | Adjust the gas spring tension. Turn the adjustment screw clockwise to increase tension for heavier monitors. |
| Monitor springs up too easily. | Adjust the gas spring tension. Turn the adjustment screw counter-clockwise to decrease tension for lighter monitors. |
| Monitor is wobbly. | Assegureu-vos de tots els cargols de muntatge (eines d'escriptori)amp/grommet and VESA plate screws) are securely tightened. Check the stability of your desk surface. |
| Cannot tilt or swivel monitor. | Check if the tilt/swivel mechanism screws are too tight. Loosen them slightly to allow movement, then re-tighten to hold position. |
| Cables do not fit in management clips. | Ensure cables are routed individually or in small bundles. Some clips may be designed for specific cable sizes. |
7. Especificacions
| Característica | Detall |
|---|---|
| Número de model | HN-DSK1-1 |
| Compatibilitat de la mida del monitor | 13 - 27 inches (flat or curved) |
| Capacitat de pes (per braç) | 17.6 lliures (8 kg) |
| Compatibilitat VESA | 75x75mm, 100x100mm |
| Opcions de muntatge | C-Clamp, Ullera |
| Gruix de l'escriptori (C-Cl)amp) | 0.39 - 2.36 inches (10 - 60mm) |
| Gruix de l'escriptori (ulleres) | 0.39 - 2.56 inches (10 - 65mm) |
| Interval d'inclinació | +85° a -90° |
| Gamma giratòria | ±90° |
| Rotació | 360° (Landscape/Portrait) |
| Material | Metall Alumini |
| Color | White (as per product title, though images show black/white) |
| Pes de l'article | 11.68 lliures |
| Dimensions del producte | 6.69 x 1.97 x 4.72 polzades |
8. Garantia i Suport
HUANUO provides a limited warranty for this product. For specific warranty terms, technical support, or to report missing/defective parts, please contact HUANUO customer service directly through their official weblloc web o el venedor on es va comprar el producte.
Conserveu el vostre comprovant de compra per a reclamacions de garantia.
