1. Introducció
This manual provides essential information for the correct installation, use, and maintenance of your Puig R12 Crash Pads. These crash pads are designed to offer protection to your motorcycle's frame and engine components in the event of a fall or slide. Please read this manual thoroughly before proceeding with installation.
2. Informació de seguretat
Avís: Improper installation can lead to product failure, damage to your motorcycle, or personal injury. If you are unsure about any step, consult a qualified motorcycle mechanic.
- Utilitzeu sempre l'equip de protecció individual (EPI) adequat durant la instal·lació.
- Ensure the motorcycle is stable and securely supported before beginning work.
- Do not modify the crash pads or mounting hardware.
- Regularly inspect the crash pads and mounting bolts for signs of wear or loosening.
- Mantingueu tots els components fora de l'abast dels nens.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- Puig R12 Crash Pads (2 units)
- Mounting hardware (bolts, washers, spacers as per instruction sheet)
- Instruction Sheet (refer to for specific hardware details)
Image 1: A pair of Puig R12 Crash Pads. Each crash pad consists of a black cylindrical body with a robust, angular black end cap, and a metallic mounting bolt extending from the opposite end. They are shown against a white background.
4. Configuració i instal·lació
Eines necessàries (no incloses):
- Clau dinamométrica
- Socket set (appropriate sizes for motorcycle frame bolts)
- Hex key set (if applicable)
- Thread-locking compound (medium strength, recommended)
Passos d'instal·lació:
- Preparació de la motocicleta: Park the motorcycle on a level, stable surface. Ensure the engine is cool. For best access, it may be necessary to remove fairings or other components. Refer to your motorcycle's service manual for specific instructions on fairing removal.
- Identificar els punts de muntatge: Locate the designated mounting points on the motorcycle frame. These are typically existing engine mount bolts or specific frame points designed for accessories. The Puig instruction sheet will provide precise locations.
- Remove Original Bolts (One Side at a Time): Carefully remove the original frame bolt from one side only. Work on one side completely before moving to the other to maintain engine alignment.
- Install Crash Pad: Assemble the Puig R12 Crash Pad with the provided mounting hardware (bolts, washers, spacers) as indicated in the Puig instruction sheet. Apply a small amount of medium-strength thread-locking compound to the threads of the new mounting bolt.
- Secure Crash Pad: Insert the assembled crash pad and bolt into the frame mounting point. Hand-tighten the bolt to ensure proper alignment.
- Parell d'apretament segons les especificacions: Using a torque wrench, tighten the mounting bolt to the torque specification provided in the Puig instruction sheet or your motorcycle's service manual. No apretar massa.
- Repetiu per a l'altre costat: Once the first crash pad is securely installed, repeat steps 3-6 for the opposite side of the motorcycle.
- Inspecció final: Double-check that both crash pads are securely fastened and that all removed fairings or components are reinstalled correctly. Ensure there is no interference with other motorcycle parts.
5. Funcionament
Puig R12 Crash Pads are passive protection devices. Once correctly installed, they require no active operation. Their function is to absorb impact and reduce damage to the motorcycle's frame and engine in the event of a fall or slide. Always ride responsibly and within your limits.
6. Manteniment
- Inspecció periòdica: Periodically check the crash pads and their mounting bolts for any signs of damage, cracks, or loosening. This should be done as part of your regular motorcycle maintenance routine.
- Neteja: Clean the crash pads with a mild soap and water solution. Avoid harsh chemicals or abrasive cleaners that could damage the material.
- Post-Incident Check: After any incident involving a fall or slide, thoroughly inspect the crash pads and their mounting points. Even if they appear undamaged, their structural integrity may be compromised. It is recommended to replace crash pads after any significant impact.
7. Solució De Problemes
- Crash Pad Feels Loose: If a crash pad feels loose, immediately stop riding. Re-tighten the mounting bolt to the specified torque. If it continues to loosen, inspect the threads of the bolt and the frame for damage.
- Vibracions inusuals: If you experience new or unusual vibrations after installation, re-check all mounting points and ensure no components are interfering with the motorcycle's moving parts.
- Dificultat d'instal·lació: If you encounter significant difficulty during installation, double-check that you have the correct model for your motorcycle and that you are following the instructions precisely. Do not force components.
8. Especificacions
| Atribut | Detall |
|---|---|
| Marca | Puig |
| Model | PRO SLIDERS (8576N) |
| Vehicle compatible | Honda CBR500R (2016-2017) |
| Material | Cautxú |
| Color | Negre |
| Pes de l'article | 4.39 lliures (aproximadament 2 quilograms) |
| Dimensions del producte | 13.3 x 7.2 x 3.5 polzades |
| País d'origen | Espanya |
9. Vídeos oficials de productes
En aquest moment no hi ha vídeos oficials del venedor disponibles per a aquest article.
10. Informació de la garantia
Puig products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty documentation included with your purchase or visit the official Puig weblloc web. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.
11. Suport
For technical assistance, missing parts, or further inquiries, please contact Puig customer support through their official website or the retailer from whom you purchased the product. When contacting support, please have your product model number (8576N) and purchase details ready.
