Manual d'usuari del provador de cables de xarxa Delock 86108

Introducció

This manual provides detailed instructions for the safe and efficient operation of your Delock 86108 Network Cable Tester. This device is designed to test various cable types, including RJ45, RJ12, BNC, and USB, for continuity and correct wiring, ensuring reliable network and data connections.

Instruccions de seguretat

• Llegiu atentament totes les instruccions abans d'utilitzar el dispositiu.
• Do not expose the device to moisture, liquids, or extreme temperatures.
• Use only the specified 9V battery type. Incorrect battery usage may damage the device.
• No intenteu obrir ni reparar el dispositiu vosaltres mateixos. Encarregueu totes les tasques de manteniment a personal qualificat.
• Mantingueu el dispositiu fora de l'abast dels nens.

Contingut del paquet

• Delock 86108 Network Cable Tester (Main Unit)
• Unitat remota
• Manual d'usuari (aquest document)

Nota: Les piles no estan incloses i s'han de comprar per separat.

Producte acabatview

The Delock 86108 Network Cable Tester consists of a main unit and a detachable remote unit. It features an integrated LED display for indicating test results for various cable types.

Unitat principal

Image Description: A red and yellow Delock 86108 Network Cable Tester main unit, showing the various ports (RJ45, RJ12, BNC, USB) and the LED indicator panel. The device has a robust, handheld design.

Unitat remota

The remote unit detaches from the main unit, allowing for convenient testing of installed cables over longer distances. It typically features corresponding ports to connect the opposite end of the cable being tested.

Configuració

Instal·lació de la bateria

1. Localitzeu el compartiment de la bateria a la part posterior de la unitat principal.
2. Obriu la tapa del compartiment de la bateria.
3. Insert one 9V battery, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Tanqueu bé la tapa del compartiment de la bateria.

Encès/Apagat

To power on the device, slide the power switch to the "ON" position. The LED indicators will briefly illuminate as a self-test. To power off, slide the switch to the "OFF" position.

Instruccions de funcionament

The Delock 86108 can test various cable types for continuity and correct wiring sequence. Always ensure the tester is powered on before connecting cables for testing.

Testing RJ45/RJ12 Cables

1. Connect one end of the RJ45 or RJ12 cable to the corresponding port on the main unit.
2. Connect the other end of the cable to the corresponding port on the remote unit. For installed cables, the remote unit can be detached and placed at the other end of the cable run.
3. Enceneu el tester.
4. Observe the LED indicators on both the main and remote units. Each LED corresponds to a specific wire. A sequential illumination of LEDs (1-8 for RJ45, 1-6 for RJ12) on both units indicates correct wiring and continuity.
5. If an LED does not light up, it indicates an open circuit (broken wire).
6. If LEDs light up out of sequence, it indicates a wiring fault (e.g., crossed pairs, short circuit).

Testing BNC Cables

1. Connect one end of the BNC cable to the BNC port on the main unit.
2. Connect the other end of the BNC cable to the BNC port on the remote unit.
3. Enceneu el tester.
4. The LED indicators will show continuity for the center conductor and the shield.

Testing USB Cables

1. Connect one end of the USB cable (Type A or B, depending on the tester's ports) to the main unit.
2. Connect the other end to the remote unit.
3. Enceneu el tester.
4. The LEDs will indicate continuity for the power, data+, data-, and ground lines of the USB cable.

Manteniment

Neteja

Wipe the device with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the casing o components interns.

Emmagatzematge

Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. If the device will not be used for an extended period, remove the battery to prevent potential leakage and damage.

Resolució de problemes

El dispositiu no s'encén.

• Check if the 9V battery is correctly installed with the proper polarity.
• Ensure the battery has sufficient charge. Replace with a new 9V battery if necessary.
• Verify the power switch is firmly in the "ON" position.

LEDs do not light up or show inconsistent patterns.

• Ensure all cables are securely connected to both the main and remote units. Loose connections can cause false readings.
• Inspect the cable being tested for visible damage, kinks, or frayed connectors.
• Test with a known good cable to verify the tester's functionality. If the known good cable tests correctly, the issue lies with the original cable.
• Replace the battery if the LEDs appear dim, flicker, or behave erratically, indicating low power.

Especificacions

• Model: Delock 86108
• Connectors compatibles: BNC, RJ-12, RJ-45, USB
• Tipus de visualització: Indicadors LED
• Font d'alimentació: 1 pila de 9V (no inclosa)
• Dimensions (L x A x A): 185 mm x 80 mm x 32 mm (7.28 polzades x 3.15 polzades x 1.26 polzades)
• Pes: 470 grams (16.58 oz)
• Color del producte: Vermell, groc

Garantia i Suport

For detailed warranty information, technical support, or service inquiries, please refer to the documentation provided with your original purchase or contact your authorized retailer. Please retain your proof of purchase for any warranty claims.