WLtoys 12428 1/12 Scale 4WD RC Off-Road Buggy Instruction Manual
Model: 12428 (43234-844)
Your guide to setting up, operating, and maintaining your high-speed electric all-terrain RC buggy.
Producte acabatview
The WLtoys 12428 is a 1/12 scale 2.4G 4WD electric RC off-road buggy designed for high-speed performance across various terrains. It features a robust 4-wheel drive system, independent shockproof suspension, and durable components for an engaging driving experience.
Contingut del paquet
- 1x Cotxe RC
- 1x transmissor
- 1x 7.4V 1500MAH Battery
- 1x cable de càrrega USB
- 1x Tornavís
- 1 x manual d'instruccions
Figure 1: WLtoys 12428 RC Car with included remote control, battery, and instruction manual.
Video 1: Unboxing of a 1/12 scale RC Buggy, demonstrating the contents of the package including the car, remote, battery, and accessories.
Característiques del producte
- 4WD Driving System: Provides strong power and trafficability for various terrains.
- 1/12 Scale All-Terrain Vehicle: Capable of driving on sand, mud, and rugged roads.
- Optimized 4-Wheel Suspension: Features soft shock absorbers and hollow rubber tires for smooth handling.
- Llums LED: Equipped with LED lights for visibility and enhanced experience during night operation.
- Full Proportional Throttle: Allows precise speed control.
- Construcció duradora: PVC explosion-proof car shell for protection.
Figure 2: The WLtoys 12428 demonstrating its 45-degree slope climbing capability, highlighting its strong engine and 4x4 drive.
Figura 3: Una sobrecàrrega view of the WLtoys 12428 RC Car, showing the location of the 7.4V 1500mAh lithium battery for high capacity and durability.
Figure 4: The WLtoys 12428 RC Car with its LED lights illuminated, showcasing its design for visibility in low-light conditions.
Configuració
Càrrega de la bateria
The RC car is powered by a 7.4V 1500mAh battery. Before first use, fully charge the battery using the provided USB charging cable. Charging time is approximately 120-180 minutes. Do not overcharge the battery.
Instal·lació de la bateria del transmissor
The transmitter requires 4 x 1.5V AA batteries (not included). Install them into the battery compartment of the transmitter, ensuring correct polarity.
Connecting Car Battery
Connect the fully charged 7.4V 1500mAh battery to the RC car's power connector. Ensure a secure connection. The battery is designed to fit snugly within its compartment to prevent movement during operation.
Transmissor i receptor d'enllaç
Turn on the RC car, then turn on the transmitter. The transmitter and receiver should automatically bind. If binding fails, refer to the detailed instructions in the included manual for specific binding procedures.
Video 2: A demonstration of unboxing and initial setup for a WLtoys RC Buggy, including battery installation and basic checks.
Instruccions de funcionament
Controls del transmissor
- Volant: Turn left/right to control the direction of the car.
- Activador: Pull for forward motion, push for backward motion.
- Retall de direcció: Adjust to ensure the car drives straight when the steering wheel is centered.
- Speed Governing: Adjust the maximum speed of the car.
- Interruptor ON / OFF: Encén o apaga el transmissor.
- Indicador d'alimentació: Shows the power status of the transmitter.
Figure 5: Diagram illustrating the functions of the remote control for the WLtoys 12428 RC Car, including steering, throttle, and trim adjustments.
Consells de conducció
The remote control distance is approximately 100 meters. Practice controlling the car's forward, backward, left, and right movements. Utilize the proportional throttle for smooth acceleration and deceleration. The LED lights enhance visibility during operation in low-light conditions.
