1. Producte acabatview
The BougeRV Solar Panel Cable Connectors with Spanners (Model IRV014) provide a reliable and durable solution for connecting solar panels. This kit includes male and female connectors, pins, and spanners, designed for easy and secure installation in various solar power systems.
Figure 1: BougeRV Solar Connectors Kit
Característiques principals:
- Kit complet: Includes 6 pairs of male and female solar panel connectors, 6 pairs of male and female solar connector pins, and 1 pair of spanners for comprehensive assembly.
- Disseny impermeable: Features a waterproof ring on each connection to effectively seal out water and dust, preventing corrosion and ensuring long-term performance.
- Material durador: Constructed with PPO insulation material, offering excellent aging resistance and UV endurance, capable of withstanding harsh outdoor conditions for over 20 years.
- Àmplia compatibilitat: Compatible with PV cables ranging from 13-10AWG (2.5mm²-6mm²).
- Muntatge fàcil: Designed for quick and simple assembly and disassembly without requiring specialized tools beyond the included spanners.
2. Contingut del paquet
Verifiqueu que tots els elements siguin presents al vostre paquet:
- 6 x Male Solar Panel Connectors
- 6 x Female Solar Panel Connectors
- 6 x Male Solar Connector Pins
- 6 x Female Solar Connector Pins
- 1 x Pair of Spanners
3. Configuració i instal·lació
Follow these steps to properly install the BougeRV Solar Panel Cable Connectors:
- Prepareu el cable: Strip approximately 1/4 inch (6mm) of insulation from the end of your PV cable (10-13AWG). Ensure no copper strands are broken during stripping.
- Crimp the Pin: Insert the stripped wire into the appropriate male or female metal pin. Use a crimping tool to securely crimp the pin onto the wire. The bare copper wire should just barely protrude from the crimp clamps.
- Insert Pin into Connector: Slide the crimped pin into the corresponding male or female connector housing until it clicks into place. Ensure the waterproof rubber seal is correctly positioned around the wire.
- Tighten the Connector: Screw the back nut of the connector onto the housing. Use the provided spanners to tighten the nut firmly, ensuring a weather-tight seal.
- Connect Male and Female: Align the male and female connectors and push them together until they click, forming a secure and waterproof connection.
Figure 2: Installation Steps for Solar Connectors
Figure 3: Using the Spanner Tool for Tightening
Video d'instal·lació:
Video 1: Official BougeRV guide on assembling and connecting solar connectors.
4. Instruccions de funcionament
Connecting and disconnecting the BougeRV solar connectors is designed to be straightforward:
- Connexió: Align the male and female connectors, ensuring the internal pins are correctly oriented. Push them firmly together until you hear or feel a click, indicating a secure lock.
- Desconnexió: To disconnect, use the spanner tool or press the built-in lock tabs on the side of the connector. While pressing the tabs, pull the male and female connectors away from each other. Do not attempt to disconnect under load.
Figure 4: Plug and Play Connection and Disconnection
5. Manteniment
To ensure the longevity and optimal performance of your BougeRV solar connectors, consider the following maintenance tips:
- Inspecció periòdica: Periodically check all connections for any signs of wear, damage, or corrosion. Ensure the nuts are tight and the waterproof seals are intact.
- Neteja: If connectors become dirty, gently clean them with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the PPO insulation.
- Protecció del medi ambient: The connectors are designed for outdoor use with IP67 waterproof and dustproof ratings. However, extreme conditions may still warrant additional protective measures if possible.
Figure 5: Waterproof Ring for Enhanced Protection
Figure 6: PPO Material for Durability
6. Solució De Problemes
If you encounter issues with your solar connectors, consider the following:
- Connexió solta: Ensure all connector nuts are fully tightened with the spanners. A loose connection can lead to resistance and heat buildup.
- Sense potència de sortida: Check if the male and female connectors are fully engaged and clicked into place. Verify that the internal pins are correctly crimped and inserted.
- Entrada d'aigua: If water is found inside the connector, check the integrity of the waterproof ring and ensure the cable diameter is appropriate for the connector's seal. Re-assemble carefully.
- Dificultat per desconnectar: Use the spanner tool to press the locking tabs firmly while pulling the connectors apart. Do not force them.
7. Especificacions
Figura 7: Especificacions tècniques a continuacióview
| Característica | Detall |
|---|---|
| Marca | BougerRV |
| Número de model | IRV014 |
| Tipus de connector | Crimpar |
| Tipus de cable | Cable del panell solar |
| Dispositius compatibles | Solar Panel, PV Cables (13-10AWG) |
| Característica especial | Weatherproof, Waterproof |
| Usos recomanats | Connecting solar panels, Outdoor installations, Permanent installations |
| Color | Black (6 pcs solar connector & 1 pair of spanners) |
| Connector Gènere | Mascle a Dona |
| Nombre de pins | 24 (total for 6 pairs) |
| Corrent de l'adaptador de CA | 30 Amps |
| Recompte d'unitats | 1 Count (kit) |
| Pes de l'article | 0.27 lliures (4.3 unces) |
| Especificació Met | CE, TUV |
| Ús interior/exterior | A l'aire lliure |
| Volum màximtage | 1000 Volts |
| Dimensions del producte | 4.4 x 4.4 x 1.2 polzades |
Figura 8: Dimensions del producte
Figura 9: Explotat View of Connector Components
8. Garantia i Suport
BougeRV products are manufactured to high-quality standards. For warranty information, technical support, or customer service inquiries, please refer to the official BougeRV weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el rebut de compra per a reclamacions de garantia.
