Introducció
The Weiser Phoenix Venetian Bronze Passage Door Knob is designed for interior doors that do not require a locking mechanism. This includes applications such as hallway doors and closet doors. Its traditional design and Venetian Bronze finish complement various home décors. The knob is reversible, allowing installation on both left-handed and right-handed doors.
Image: Weiser Phoenix Venetian Bronze Passage Door Knob, showcasing its traditional design and finish.
Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- 1 Set of Door Knobs (Interior and Exterior)
- 1 Latch mechanism
- 1 Strike plate
- Cargols de muntatge
- Manual d'instal·lació
Especificacions de la porta
Ensure your door meets the following specifications for proper fit and function:
- Gruix de la porta: 1-3/8 inches to 1-3/4 inches (35mm - 44mm)
- Latch Backset: Adjustable for 2-3/8 inches or 2-3/4 inches (60mm or 70mm)
- Diàmetre creuat: 2-1/8 polzades (54 mm)
Configuració i instal·lació
Installation of the Weiser Phoenix Passage Door Knob is designed to be straightforward and can typically be completed with a screwdriver.
- Prepara la porta: Ensure the door has the correct bore holes and backset. If replacing an existing knob, remove the old hardware.
- Instal·leu el tancament: Insert the latch mechanism into the edge bore hole of the door. Ensure the latch bolt faces the door frame. Secure it with the provided screws. The latch is adjustable to fit either a 2-3/8 inch or 2-3/4 inch backset.
- Install the Exterior Knob: Place the exterior knob assembly through the 2-1/8 inch cross bore hole, ensuring the spindle aligns with the latch mechanism.
- Instal·leu el botó interior: Position the interior knob assembly over the spindle and align the mounting posts with the holes on the exterior assembly.
- Assegureu els botons: Fasten the interior and exterior knob assemblies together using the provided screws. Tighten securely, but do not overtighten, to ensure smooth operation.
- Instal·leu la placa de tancament: Attach the strike plate to the door frame, aligning it with the latch bolt. Secure with screws.
- Prova de funcionament: Open and close the door several times, turning the knobs to ensure the latch retracts and extends smoothly without binding.
Instruccions de funcionament
The Weiser Phoenix Passage Door Knob is a non-locking mechanism designed for easy access. To open a door equipped with this knob:
- Grasp either the interior or exterior knob.
- Turn the knob in either direction (clockwise or counter-clockwise).
- Push or pull the door open.
The latch will retract when the knob is turned and extend automatically when the door is closed, holding the door in place without locking it.
Cura i Manteniment
To maintain the appearance and functionality of your Weiser Phoenix Door Knob, follow these guidelines:
- Neteja: Clean the knob with a soft, damp drap. Eviteu netejadors abrasius, dissolvents o productes químics agressius, ja que poden danyar l'acabat.
- Lubricació: If the latch mechanism becomes stiff over time, a small amount of silicone-based lubricant can be applied to the latch bolt. Do not use oil-based lubricants, as they can attract dust and debris.
- Apretament: Periodically check the mounting screws for tightness. If the knobs feel loose, gently tighten the screws to ensure secure attachment.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Knob is loose or wobbly. | Els cargols de muntatge estan solts. | Tighten the mounting screws connecting the interior and exterior knob assemblies. |
| El pestell no es retrau suaument. | Debris in the latch mechanism or lack of lubrication. | Clean the latch mechanism. Apply a small amount of silicone-based lubricant to the latch bolt. |
| Door does not close properly or rattles. | Strike plate misalignment. | Adjust the position of the strike plate on the door frame to ensure proper alignment with the latch bolt. |
| Knob is difficult to turn. | Over-tightened mounting screws or misaligned components. | Loosen mounting screws slightly and re-test. Ensure all components are correctly aligned during installation. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | Weiser |
| Número de model | 9GA1010-015 |
| Estil | Hall/Closet (Passage) |
| Color | Bronze venecià |
| Acabar | Raspallat |
| Forma | Ronda |
| Tipus de mànec | Pom |
| Tipus de bloqueig | Sense bloqueig |
| Compatibilitat del gruix de la porta | 1-3/8" - 1-3/4" |
| Retorn del tancament | Adjustable 2-3/8" - 2-3/4" |
| Forat transversal | 2-1/8" |
| Pes de l'article | 480 g |
| Dimensions del producte | 11.58 x 7.59 x 7.59 cm |
| Característica especial | Fàcil d'instal·lar |
Informació de la garantia
This Weiser product comes with a 30 dies de garantia. For specific details regarding mechanical and finish warranties, please refer to the documentation included with your purchase or visit the official Weiser weblloc.
Atenció al client
For further assistance, technical support, or warranty claims, please contact Weiser customer service. You can find contact information and additional resources on the official Weiser weblloc:
Visit Weiser's Official Weblloc
Please have your model number (9GA1010-015) and purchase information ready when contacting support.
