User Manual for Mediacom 1056B03 Universal On Demand Cable/TV Remote Control

1. Configuració i configuració inicial

This section guides you through the initial setup of your Mediacom 1056B03 Universal Remote Control, including battery installation and basic programming steps.

1.1 Instal·lació de la bateria

The remote control requires two AAA batteries (included). Follow these steps to install them correctly:

1. Localitzeu la tapa del compartiment de la bateria a la part posterior del comandament a distància.
2. Premeu la pestanya i feu lliscar la tapa cap avall per obrir el compartiment.
3. Introduïu dues piles AAA, assegurant-vos que els terminals positiu (+) i negatiu (-) estiguin alineats amb les marques de l'interior del compartiment.
4. Feu lliscar la tapa del compartiment de la bateria fins que faci clic de manera segura.

Figure 1: Mediacom 1056B03 Universal Remote Control with two AAA batteries. The image shows the front of the remote and two batteries, illustrating the type of batteries required for operation.

1.2 Quick Remote Setup (Programming)

This remote is designed to control various devices. Use the quick setup method to program it for your TV, DVD player, or other compatible devices:

1. Ensure the device you wish to control (e.g., TV, DVD player) is turned on.
2. Press and hold the corresponding device key on the remote (e.g., TV, DVD, CBL).
3. While still holding the device key, press and hold the PODER botó.
4. Continue holding both keys until the device you are programming turns apagat.
5. Release both keys. The remote should now be programmed for that device.

For more detailed programming instructions or to find specific codes, please visit the manufacturer's support weblloc: www.urcsupport.com.

Figura 2: posterior view of the Mediacom 1056B03 Universal Remote Control. The image highlights the battery compartment and printed quick setup instructions on the back casing.

2. Ús del comandament a distància

This section describes the functions of the various buttons on your Mediacom 1056B03 Universal Remote Control.

Figura 3: Frontal view of the Mediacom 1056B03 Universal Remote Control. This image provides a clear layout of all control buttons.

2.1 Funcions dels botons anteriorsview

• MASTER PWR / PWR (Power): Encén o apaga el dispositiu seleccionat.
• Device Keys (TV, AUD, DVD, CBL): Selecciona el dispositiu que voleu controlar.
• CONFIGURACIÓ: Used for programming the remote.
• GUIA: Displays the program guide.
• MENÚ: Accesses the device's main menu.
• INFO: Displays information about the current program or selection.
• CONFIGURACIÓ: Accesses device settings.
• Navigation Pad (Up, Down, Left, Right, OK/SELECT): Navigates through menus and selects options.
• Sortida: Exits current menu or screen.
• PAGE (+/-): Scrolls through pages in guides or menus.
• VOL (+/-): Ajusta el volum.
• CH (+/-): Canvia de canal.
• MUT: Silencia o activa l'àudio.
• ÚLTIM: Torna a l'anterior viewcanal ed.
• Teclat numèric (0-9): Enters channel numbers or other numerical inputs.
• A DEMANDA: Accesses on-demand content.
• EN VIU: Returns to live television.
• DVR Controls (REW, PLAY, FFWD, REC, STOP, PAUSE): Controls playback of recorded content.
• FONT DEL VÍDEO: Changes video input source.
• PIP (Picture-in-Picture) Controls: Manages Picture-in-Picture functions (if supported by device).

3. Manteniment

Un manteniment adequat garanteix la longevitat i el rendiment òptim del comandament a distància.

3.1 Neteja del comandament a distància

Per netejar el comandament a distància, utilitzeu un drap suau i lleugerament sec.amp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the remote's surface or internal components. Ensure no liquid enters the remote through button gaps or openings.

3.2 Substitució de la bateria

Replace the batteries when the remote's performance degrades, such as reduced range or unresponsive buttons. Always replace both batteries at the same time with new AAA alkaline batteries. Dispose of old batteries according to local regulations.

4. Solució De Problemes

If you encounter issues with your Mediacom 1056B03 Universal Remote Control, refer to the following common problems and solutions:

• Remote is not responding or device does not turn on/off:
  • Comproveu si les piles estan inserides correctament amb la polaritat correcta.
  • Substituïu les piles velles per unes de noves.
  • Ensure you are pointing the remote directly at the device's infrared sensor.
  • Verify that the correct device key (e.g., TV, DVD) is selected before pressing a function button.
  • Re-program the remote using the "Quick Remote Setup" steps in Section 1.2.
• Only some buttons are working:
  • This may indicate a programming issue. Try re-programming the remote for the specific device.
  • Ensure the remote is in the correct device mode (e.g., TV mode for TV functions).
• Remote range is reduced:
  • Substituïu les piles.
  • Assegureu-vos que no hi hagi obstruccions entre el comandament a distància i el dispositiu.

If these steps do not resolve the issue, please refer to the manufacturer's support weblloc per obtenir més ajuda: www.urcsupport.com.

5. Especificacions

6. Garantia i Suport

This section provides information regarding product warranty and how to obtain support.

6.1 Informació de la garantia

Specific warranty details for the Mediacom 1056B03 Universal Remote Control are not provided in this manual. For information regarding warranty coverage, terms, and conditions, please contact the manufacturer directly or visit their official support weblloc.

6.2 Atenció al client

For technical assistance, programming queries, or any other support needs, please visit the official support weblloc:

www.urcsupport.com

When contacting support, please have your product model number (1056B03) and any relevant purchase information ready.