APC SMT750C

Manual d'usuari de l'APC Smart-UPS SMT750C

Brand: APC | Model: SMT750C

Producte acabatview

The APC Smart-UPS SMT750C is a 750VA / 500W Sinewave Uninterruptible Power Supply (UPS) designed to provide reliable battery backup and surge protection for servers, switches, routers, and other networking devices. It features Automatic Voltage Regulation (AVR) to maintain stable power levels and includes APC SmartConnect for cloud-enabled remote monitoring and management.

Davant view of the APC Smart-UPS SMT750C

Figura 1: Frontal view of the APC Smart-UPS SMT750C, a compact tower design.

Les característiques clau inclouen:

Configuració

Follow these steps to set up your APC Smart-UPS SMT750C:

  1. Desembalatge: Carefully remove the UPS unit and all accessories from the packaging. Verify that all components listed in the "What's in the Box" section are present.
  2. Connexió de la bateria: The UPS unit comes with batteries included. Refer to the SmartConnect Installation Guide for specific instructions on connecting the internal batteries. Ensure the battery connector is securely seated.
  3. Col·locació: Place the UPS in a cool, dry location, away from direct sunlight and heat sources. Ensure adequate ventilation around the unit. The unit is designed for tower placement.
  4. Connexió d'alimentació: Plug the UPS power cord (NEMA 5-15P) directly into a grounded wall outlet. Avoid using extension cords or surge protectors with the UPS input.
  5. Connexió del dispositiu: Connect your equipment (servers, switches, routers, etc.) to the NEMA 5-15R output receptacles on the rear of the UPS. Utilize the switchable outlet group for devices you wish to control remotely or shut down gracefully.
  6. Càrrec inicial: Allow the UPS to charge for at least 24 hours before connecting critical loads or performing any self-tests to ensure full battery capacity.
  7. Connexió de xarxa (opcional): For SmartConnect features, connect an Ethernet cable from the UPS's SmartConnect Ethernet port to your network. Follow the SmartConnect Installation Guide for cloud monitoring setup.
posterior view of the APC Smart-UPS SMT750C showing input/output ports

Figura 2: posterior view of the UPS, highlighting the NEMA 5-15R output receptacles and network port.

Instruccions de funcionament

Your Smart-UPS SMT750C is designed for ease of use. Here are basic operating procedures:

APC Smart-UPS SMT750C in an office setting

Figure 3: The UPS seamlessly integrated into a typical office workstation, providing power protection.

Manteniment

Proper maintenance ensures the longevity and optimal performance of your UPS:

Resolució de problemes

This section provides solutions to common issues. For more detailed troubleshooting, refer to the full User Manual (PDF) or contact APC support.

ProblemaCausa possibleSolució
El SAI no s'encén.Bateria no connectada o amb poca càrrega.Ensure battery connector is fully seated. Allow UPS to charge for 24 hours.
El SAI emet un so continu.On battery power due to power outage or low battery.Check utility power. If power is restored, the beeping should stop. If battery is low, allow it to recharge.
Els equips connectats perden energia.UPS overloaded or battery depleted.Reduce load on the UPS. Check LCD for overload warning. Allow battery to recharge.
SmartConnect not connecting.Network issue or incorrect configuration.Verify Ethernet cable connection. Check network settings and firewall rules. Refer to SmartConnect guide.

Especificacions

CaracterísticaDetall
Número de modelSMT750C
Capacitat (VA/Watts)750 VA / 500 W
Entrada Voltage120 Volts
Receptacles de sortida(6) NEMA 5-15R
Endoll d'entradaNEMA 5-15P
Tipus de bateriaSealed Lead Acid (2 included)
Dimensions del producte (P x A x A)14.53 x 5.43 x 6.34 polzades
Pes de l'article27.5 lliures
ColorNegre

Garantia i suport

APC provides comprehensive warranty and support for your Smart-UPS SMT750C:

For technical support, warranty claims, or additional information, please visit the official APC weblloc web o consulteu la informació de contacte que es proporciona a la documentació del producte.

Accessoris inclosos

Your APC Smart-UPS SMT750C package includes:

Informació important de seguretat

Please read all safety instructions before installing or operating your UPS. This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning). Always follow local regulations for battery disposal.

Vídeos de productes

No official seller videos are available for this product at this time. Please refer to the written instructions and diagrams for guidance.

Documents relacionats - SMT750C

Preview Manual d'instruccions del Smart-UPS d'APC: Guia d'instal·lació, seguretat i resolució de problemes
Manual d'operació oficial per a les unitats de sistema d'alimentació ininterrompuda (SAI) Smart-UPS d'APC. Cobreix la instal·lació, la seguretat, el funcionament, la configuració i la resolució de problemes per a models com la sèrie SMT. Proporciona una guia essencial de protecció d'energia.
Preview Manual d'usuari de la sèrie BX de Back-UPS d'APC: instal·lació, funcionament i resolució de problemes
Manual d'usuari complet per a la sèrie APC Back-UPS BX (de 500 VA a 2200 VA) de Schneider Electric, que inclou instruccions de seguretat, descripció del producte, característiques operatives, instal·lació, resolució de problemes, servei i informació sobre garantia.
Preview APC Smart-UPS User Manual: SMT Series Uninterruptible Power Supply
Comprehensive user manual for APC Smart-UPS SMT series uninterruptible power supplies (UPS), covering installation, operation, safety, troubleshooting, and specifications for models SMT750C through SMT3000CUS.
Preview Guia d'instal·lació d'APC Smart-UPS: de SMT750RMI2UC a SMT3000RMI2UC
Aquesta guia proporciona instruccions d'instal·lació per als models SAI Smart d'APC SMT750RMI2UC, SMT1000RMI2UC, SMT1500RMI2UC, SMT2200RMI2UC i SMT3000RMI2UC. Cobreix el muntatge en bastidor, les connexions i la configuració de SmartConnect.
Preview Guia d'instal·lació d'APC Smart-UPS per a SMT750IC, SMT1000IC, SMT1500IC, SMT2200IC, SMT3000IC
Aquesta guia d'instal·lació proporciona instruccions per configurar els models SMT750IC, SMT1000IC, SMT1500IC, SMT2200IC i SMT3000IC d'APC Smart-UPS. Cobreix la connexió del SAI, els cables d'alimentació i informació sobre la funció SmartConnect.
Preview Guia d'instal·lació de l'APC Smart-UPS SMT750-3000RM2UC | Schneider Electric
Guia d'instal·lació completa per als models SAI per a muntatge en rack APC Smart-UPS SMT750, SMT1000, SMT1500, SMT2200 i SMT3000RM2UC. Apreneu a desempaquetar, instal·lar i connectar el vostre SAI.