Manual d'usuari de l'altaveu actiu de 2 vies RCF ART 710A de 1400 W i 10 polzades

Introducció

This manual provides essential information for the safe and efficient operation of your RCF ART 710A active 2-way speaker. Please read this manual thoroughly before using the product to ensure proper setup, operation, and maintenance. Retain this manual for future reference.

Figura 1: Frontal view of the RCF ART 710A active speaker, showcasing its robust grille and RCF logo.

Informació important de seguretat

• Font d'alimentació: Assegureu-vos que la font d'alimentació voltage matches the requirements specified on the unit. Use only the provided power cord.
• Ventilació: No bloquegeu les obertures de ventilació. Assegureu-vos que hi hagi un flux d'aire adequat al voltant de la unitat per evitar el sobreescalfament.
• Humitat: Do not expose the unit to rain or moisture. Avoid placing liquids on or near the speaker.
• Col·locació: Place the speaker on a stable, level surface or mount it securely using appropriate hardware.
• Manteniment: Demaneu totes les tasques de manteniment a personal de servei qualificat. No intenteu obrir ni reparar la unitat vosaltres mateixos.
• Protecció auditiva: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Use hearing protection when operating at high volumes.

Característiques clau

• 1400W Peak Power, 700W RMS
• 10-inch Woofer, 1-inch Compression Driver
• FiRPHASE Technology for linear response
• Integrated DSP with equalization, phase control, soft limiting, crossover, and speaker protections
• Classe D Ampaixecadors
• Resposta de freqüència: 50 Hz - 20 kHz
• SPL màxim: 129 dB

Configuració

1. Desembalatge

Carefully remove the speaker from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Retain the original packaging for future transport or storage.

2. Col·locació i muntatge

The ART 710A can be used as a main front-of-house speaker, a stage monitor, or mounted on a pole. Ensure the speaker is placed on a stable surface or securely mounted.

• Muntatge al pal: Use a standard 35mm speaker pole. Ensure the pole is rated to support the speaker's weight (approximately 37 lbs / 16.8 kg).
• Col·locació del pis: Per stage monitor applications, position the speaker at the desired angle.
• Suspensió: If suspending the speaker, consult a qualified professional and use appropriate rigging hardware.

Figura 2: superior view of the RCF ART 710A, highlighting the integrated pole mount socket for stand placement.

3. Connexions

Refer to the rear panel for all input and output connections.

Figure 3: Rear panel of the RCF ART 710A, displaying XLR inputs, output, volume control, and power connection.

1. Entrada d'àudio: Connect your audio source (mixer, instrument, etc.) to the ENTRADA EQUILIBRADA mitjançant un cable XLR.
2. Audio Output (Link): Utilitza el SORTIDA EQUILIBRADA to link to another speaker or audio device.
3. Entrada d'alimentació: Connect the provided power cord to the ENTRADA CA endoll.
4. Input Sensitivity Switch: Adjust for microphone or line-level signals.
5. Control de volum: Ajusta el nivell de sortida general de l'altaveu.

Instruccions de funcionament

1. Encès / apagat

• Ensure all connections are secure and the volume control is set to minimum before powering on.
• Gira el INTERRUPTOR D'ALIMENTACIÓ to the "ON" position. The power indicator LED will illuminate.
• To power off, set the volume to minimum, then flip the INTERRUPTOR D'ALIMENTACIÓ a "OFF".

2. Adjusting Volume and Input Sensitivity

• Comença amb el VOLUM control at its minimum setting.
• Estableix el SENSIBILITAT D'ENTRADA switch according to your source: "MIC" for microphone level signals, "LINE" for line level signals (e.g., mixer output).
• Augmentar gradualment el VOLUM control to the desired listening level. Monitor the signal LEDs to avoid clipping (distortion).

3. DSP Functions (Internal Processing)

The ART 710A features an integrated Digital Signal Processor (DSP) that manages equalization, phase control, soft limiting, crossover, and speaker protections automatically. There are no user-adjustable DSP parameters directly on the unit. The system is optimized for a linear response and balanced sound.

Manteniment

• Neteja: Clean the speaker cabinet with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Reixa: Periodically check the front grille for dust or debris and gently clean if necessary to maintain optimal sound dispersion.
• Emmagatzematge: When not in use for extended periods, store the speaker in a dry, temperate environment, ideally in its original packaging or a protective cover.
• Inspecció: Regularly inspect power cables and audio cables for any signs of wear or damage. Replace damaged cables immediately.

Resolució de problemes

Especificacions tècniques

Informació de la garantia

RCF products are covered by a limited warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and product. Please refer to the official RCF website or your local distributor for detailed warranty information and registration procedures. Keep your proof of purchase for warranty claims.

Atenció al client

For technical assistance, service, or spare parts, please contact RCF customer support or your authorized RCF dealer. You can find contact information on the official RCF weblloc:

RCF Official Support Weblloc

When contacting support, please have your product model (ART 710A) and serial number ready. The serial number is located on the rear panel of the speaker.