Manual d'usuari del sistema d'altaveus de 2 vies JL Audio C1-650
Model: C1-650
Introducció
Thank you for choosing the JL Audio C1-650 2-Way Speaker System. This manual provides essential information for the proper installation, operation, and maintenance of your new car audio speakers. Please read this manual thoroughly before attempting installation or operation.
Image: The JL Audio C1-650 2-Way Speaker System, showing the main 6.5-inch woofer, separate tweeter, and passive crossover network.
Informació de seguretat
Observeu sempre les precaucions de seguretat següents:
- Desconnecteu la bateria del vehicle abans de començar qualsevol instal·lació elèctrica.
- Assegureu-vos que tot el cablejat estigui correctament aïllat i fixat per evitar curtcircuits.
- Do not mount speakers in locations that obstruct vehicle operation or safety features.
- Utilitzeu l'equip de seguretat adequat, inclosa la protecció ocular, durant la instal·lació.
- Consulteu un instal·lador professional si teniu dubtes sobre alguna part del procés d'instal·lació.
Què hi ha a la caixa
Your JL Audio C1-650 system includes the following components:
- Two (2) 6.5-inch (165mm) Woofers
- Two (2) 0.75-inch (19mm) Aluminum Dome Tweeters
- Two (2) In-line Passive Crossover Networks
- Maquinari de muntatge (cargols, clips)
- Grilles (if applicable, not explicitly listed but common)
- Mounting rings (as shown in image)
Image: Two black speaker mounting rings, designed to facilitate installation in various vehicle applications.
Image: A compact black in-line passive crossover network with red and black wires, used to separate audio frequencies for the woofer and tweeter.
Configuració i instal·lació
Una instal·lació correcta és crucial per a un rendiment òptim. Seguiu aquests passos generals:
- Planificació: Determine the best mounting locations for the woofers and tweeters in your vehicle. Consider speaker dimensions and available space.
- Desmuntatge: Carefully remove existing speakers or trim panels to access mounting locations.
- Cablejat:
- Connect the vehicle's speaker wires to the input side of the passive crossover network.
- Connect the woofer to the "Woofer" output of the crossover.
- Connect the tweeter to the "Tweeter" output of the crossover.
- Ensure correct polarity (+ to + and - to -) for all connections.
- Muntatge de woofers:
- Secure the woofers using the provided mounting hardware.
- Refer to the woofer dimension diagram for cutout and mounting depth requirements.
- Muntatge de tweeters:
- The tweeters can be flush-mounted or surface-mounted.
- For flush mounting, create a cutout of the specified diameter.
- For surface mounting, use the included surface-mount cups.
- Refer to the tweeter dimension diagram for precise measurements.
- Prova: Before reassembling panels, connect the vehicle's battery and test the speakers to ensure they are functioning correctly.
- Remuntatge: Carefully reassemble all removed panels and trim.
Diagrames dimensionals
Image: Technical diagram illustrating the dimensions of the C1-650 woofer, including outer diameter (A), grille tray diameter (B), motor diameter (C), mounting hole diameter (F), and mounting depth (G).
Image: Technical diagram showing the dimensions for the C1-650 tweeter, including flush-mount diameter (A1), surface-mount diameter (A2), mounting hole diameter (B), flush-mount depth (C), and front protrusion (D1, D2).
Image: Technical diagram detailing the dimensions of the C1-650 passive crossover, including width (W), height (H), and depth (D).
Funcionament del vostre sistema d'altaveus
Once installed, your JL Audio C1-650 speakers will operate as part of your vehicle's audio system. Ensure your head unit or amplifier is properly configured to deliver audio signals to the speakers. Avoid excessive volume levels that cause audible distortion, as this can damage the speakers.
The C1-650 system is designed for optimal sound reproduction across a wide frequency range, providing clear vocals and robust mid-bass. For best results, consider adjusting your audio system's equalizer settings to suit your personal listening preferences.
Manteniment
The JL Audio C1-650 speakers require minimal maintenance:
- Keep the speaker grilles clean by gently wiping them with a soft, dry cloth.
- Avoid exposing the speakers to excessive moisture or direct sunlight for prolonged periods.
- Do not apply any chemicals or abrasive cleaners to the speaker cones or surrounds.
- Reviseu periòdicament les connexions del cablejat per assegurar-vos que es mantinguin segures.
Resolució de problemes
If you experience issues with your C1-650 speaker system, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| No hi ha so dels altaveus | Connexió de cablejat fluixa; Polaritat incorrecta; AmpUnitat principal/l'amplificador està apagat o defectuós; Fusible fundit. | Check all wiring connections; Verify polarity; Ensure audio source is on and functioning; Check vehicle's audio system fuse. |
| So distorsionat | Volum massa alt; Amplifier clipping; Incorrect crossover settings; Damaged speaker. | Reduir el volum; Comprovar amplifier gain settings; Ensure crossover is correctly wired; Inspect speaker for physical damage. |
| Un altaveu no funciona | Loose connection to that speaker; Faulty speaker wire; Damaged speaker or crossover. | Check connections for the specific speaker; Test speaker wire continuity; Isolate and test the speaker and crossover. |
If problems persist after troubleshooting, contact JL Audio customer support or a qualified car audio technician.
Especificacions
Detailed technical specifications for the JL Audio C1-650 2-Way Speaker System:
| Característica | Especificació |
|---|---|
| Maneig continu de l'energia (RMS) | 50 W |
| Potència musical màxima | 225 W |
| Recomanat AmpPotència del lifier (RMS) | 10 - 75 W / Ch. |
| Eficiència del sistema | 91.0 dB @ 1 W / 1 m |
| Impedància nominal del sistema | 4 Ω |
| Resposta de freqüència del sistema | 59 Hz - 22 KHz ± 3 dB |
| Woofer Outer Diameter | 6.5 mm / 165 mm |
| Woofer Mounting Hole Diameter | 5.56 mm / 141 mm |
| Profunditat de muntatge del woofer | 2.44 mm / 62 mm |
| Tweeter Flush-Mount Diameter | 48 mm |
| Tweeter Flush-Mount Depth | 0.76 mm / 19 mm |
| Crossover Dimensions (W x H x D) | 50 mm x 23 mm x 34 mm (aprox.) |
| Pes del producte | 2.45 kg |
Garantia i Suport
JL Audio products are designed and manufactured to the highest quality standards. For information regarding your product's warranty coverage, please refer to the warranty card included with your purchase or visit the official JL Audio weblloc.
For technical support, installation assistance, or service inquiries, please contact JL Audio customer service through their official channels. You can typically find contact information on their weblloc web o a l'embalatge del producte.
Recursos en línia: For additional information, FAQs, and product registration, please visit www.jlaudio.com.
