BONTEC Portable Mobile Standing Laptop Desk MWS-001BK Instruction Manual

Introducció

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your BONTEC Portable Mobile Standing Laptop Desk, Model MWS-001BK. Please read this manual thoroughly before use to ensure proper function and safety.

Informació de seguretat

• Assegureu-vos que tots els components siguin presents i no estiguin danyats abans del muntatge.
• Do not exceed the maximum weight capacity: Main desktop 44 lbs (20 kg), Secondary shelf 22 lbs (10 kg).
• Mantingueu els nens i les mascotes allunyats durant el muntatge.
• Tighten all screws firmly, but do not overtighten.
• Utilitzeu-lo en una superfície plana i estable.
• Lock casters when the desk is in a stationary position.

Contingut del paquet

Verifiqueu que totes les peces estiguin incloses al paquet:

• Escriptori principal
• Secondary Shelf
• Columnes de suport verticals (2)
• Base amb rodes
• Maquinari de muntatge (cargols, claus, etc.)

Si falta alguna peça o està danyada, poseu-vos en contacte amb el servei d'atenció al client.

Muntatge i muntatge

Follow these steps to assemble your BONTEC Portable Mobile Standing Laptop Desk. It is recommended to have a clear, open space for assembly.

Pas 1: Fixeu les rodes a la base

Secure the four smooth-rolling casters to the base of the desk. Ensure two of the casters are lockable and positioned for easy access.

Descripció de la imatge: Un ple view of the assembled BONTEC portable mobile standing laptop desk, highlighting its casters at the base. The main desktop is tilted, holding a laptop, and the secondary shelf holds a cup and pen.

Step 2: Assemble Vertical Support Columns

Connect the vertical support columns to the base. Ensure they are securely fastened using the provided hardware.

Step 3: Attach Secondary Shelf

Mount the secondary shelf to the vertical support columns at your desired height. This shelf provides additional space for accessories.

Descripció de la imatge: An illustration demonstrating the full dynamic motion of the desk, including the 0-40 degree tilt of the main desktop and the height adjustment mechanism of the entire desk.

Step 4: Install Main Desktop

Attach the main desktop to the top of the vertical support columns. This desktop features a tilt mechanism and an anti-slip stopper.

Descripció de la imatge: Primer pla views of the desk's features: a hand wiping a waterproof surface, non-slip pads on the desktop, and hand screws used for height adjustments.

Pas 5: Comprovacions finals

Once assembled, ensure all screws are tight and the desk is stable. Test the height adjustment and tilt mechanisms.

Instruccions de funcionament

Ajust d'alçada

The desk's height can be adjusted from 40.5 to 49 inches (103 to 125 cm). To adjust the height, loosen the hand screws on the vertical support columns, raise or lower the desktop to the desired position, and then firmly tighten the hand screws to secure it.

Descripció de la imatge: A split image showing a person comfortably using the BONTEC desk while sitting on a stool and then standing, demonstrating the desk's sit-stand functionality.

Desktop Tilt Adjustment

The main desktop can be tilted from 0 to 40 degrees. To adjust the tilt, loosen the knob located on the side of the desktop support, set the desktop to the desired angle, and then tighten the knob to lock it in place. The integrated anti-slip stopper will prevent items from sliding off.

Rodes de mobilitat i bloqueig

The desk is equipped with four smooth-rolling casters for easy movement. To move the desk, unlock the casters. Once the desk is in the desired position, press down on the locking mechanism on two of the casters to secure the desk in place.

Descripció de la imatge: A close-up illustration of the desk's casters, showing their 360-degree rotation capability and the locking mechanism for stability.

Using the Secondary Shelf

The secondary shelf provides additional storage for items such as cups, pens, or small documents. Ensure items placed on this shelf do not exceed its weight capacity of 22 lbs (10 kg).

Manteniment

• Neteja: Netegeu les superfícies amb un suau, damp cloth. Avoid abrasive cleaners. The desktop surface is scratch-resistant and waterproof for easy cleaning.
• Elements de fixació: Reviseu periòdicament tots els cargols i perns per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal per mantenir l'estabilitat.
• Rodes: Keep casters free of debris to ensure smooth rolling.
• Emmagatzematge: Store the desk in a dry environment away from extreme temperatures.

Resolució de problemes

Especificacions

• Model: MWS-001BK
• Marca: BONTEC
• Dimensions del producte: 24.41 x 15.75 x 49.21 polzades (62 x 40 x 125 cm)
• Pes de l'article: 32.6 lliures (14.8 kg)
• Main Desktop Capacity: 44 lliures (20 kg)
• Secondary Shelf Capacity: 22 lliures (10 kg)
• Interval d'ajust d'alçada: De 40.5 a 49 polzades (de 103 a 125 cm)
• Desktop Tilt Range: 0 a 40 graus
• Material: Alloy Steel, MDF
• Color: Negre
• Rodes: 4 universal mute wheels, 2 lockable

Descripció de la imatge: A diagram illustrating the key dimensions of the BONTEC desk, including height, width, depth, and the dimensions of both the main desktop and the secondary shelf, along with their respective weight capacities.

Informació de la garantia

BONTEC products are designed and manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official BONTEC weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.

Atenció al client

If you have any questions, require assistance, or encounter issues with your BONTEC Portable Mobile Standing Laptop Desk, please contact BONTEC customer support:

• Weblloc: Visit the BONTEC Store on Amazon (per a consultes generals i informació sobre productes)
• Refer to your product packaging for direct contact information (email/phone).