Movo VXR700 Shotgun Condenser Video Microphone Instruction Manual

1. Producte acabatview

The Movo VXR700 is a professional-quality shotgun condenser microphone engineered to capture clear, precise audio while effectively reducing unwanted background noise. It features an integrated shockmount for vibration isolation, a selectable 10dB gain switch to boost audio levels, and a low-cut filter to minimize low-frequency rumble. Designed for use with DSLR cameras and camcorders, this microphone is powered by a single AA battery (not included) and comes with both a standard foam windscreen and a furry 'deadcat' windscreen for superior wind noise reduction.

Image 1: Movo VXR700 Shotgun Condenser Video Microphone with foam windscreen, furry windscreen, and carrying pouch.

2. Què hi ha a la caixa

• Movo VXR700 Shotgun Condenser Video Microphone with integrated foam windscreen
• Furry 'Deadcat' Windscreen
• Bossa de transport
• Guia de configuració ràpida
• Comment Card
• Targeta de garantia

Note: 1 'AA' battery is required for operation and is NOT included.

3. Instruccions de configuració

3.1 Instal·lació de la bateria

1. Locate the battery compartment on the side of the microphone.
2. Gently slide open the battery compartment cover.
3. Inseriu una (1) pila AA, assegurant-vos de la polaritat correcta (+/-).
4. Tanqueu bé la tapa del compartiment de la bateria.

3.2 Muntatge del micròfon

The VXR700 offers versatile mounting options:

• Muntatge de sabates fredes: Slide the microphone's cold shoe base into your camera's hot shoe or cold shoe mount. Tighten the locking knob to secure it in place.
• 1/4-inch Thread: The base also features a 1/4-inch thread, allowing direct attachment to standard tripods, light stands, or other accessories with a compatible screw.

Image 2: Movo VXR700 microphone attached to a DSLR camera via the cold shoe mount.

3.3 Connexió al dispositiu

The microphone includes a built-in 3.5mm audio cable. Plug this cable into the 3.5mm microphone input jack on your DSLR camera, camcorder, or other compatible recording device.

3.4 Ús del parabrisa

• Parabrisa d'escuma: The microphone comes with a pre-installed foam windscreen, suitable for reducing light wind noise and plosives in indoor or calm outdoor environments.
• Furry 'Deadcat' Windscreen: For significant wind noise reduction (up to 40dB), slide the furry 'deadcat' windscreen over the foam windscreen. This is ideal for outdoor recording in windy conditions.

4. Instruccions de funcionament

The control switches are located on the back of the microphone unit.

• Interruptor d'alimentació (ON/OFF): Slide the switch to 'ON' to power on the microphone. Ensure the microphone is powered off when not in use to conserve battery life.
• Gain Switch (0dB / +10dB):
  • 0 dB: Standard gain setting.
  • +10dB: Boosts the audio signal by 10 decibels. Use this setting when recording quieter sources or when your camera's preamps are noisy, to achieve a stronger signal-to-noise ratio.
• Low-Cut Filter Switch: Activates a low-cut filter that reduces low-frequency sounds (e.g., air conditioning hum, traffic rumble). This helps to improve clarity of speech and other mid-to-high frequency sounds.

Imatge 3: posterior view of the Movo VXR700, highlighting the power, gain, and low-cut filter switches.

5. Manteniment

• Neteja: Feu servir un drap suau i sec per netejar el cos del micròfon. No utilitzeu netejadors líquids ni dissolvents.
• Emmagatzematge: Store the microphone in its provided carrying pouch when not in use to protect it from dust, moisture, and physical damage.
• Bateria: Traieu la pila AA si no heu d'utilitzar el micròfon durant un període prolongat per evitar que la pila es desprengui.

6. Solució De Problemes

• Sense àudio/Àudio baix:
  • Ensure the microphone is powered 'ON'.
  • Check that the battery is correctly installed and has sufficient charge.
  • Verify the 3.5mm audio cable is securely plugged into both the microphone and your recording device.
  • Adjust the gain switch to '+10dB' if the audio is too quiet.
  • Check your camera's audio input settings to ensure the external microphone is selected and input levels are appropriate.
• Soroll de fons excessiu:
  • Ensure the low-cut filter is engaged if low-frequency hums are present.
  • Use the furry 'deadcat' windscreen in windy conditions.
  • Position the microphone closer to the sound source and further from noise sources.

7. Especificacions

8. Garantia i Suport

The Movo VXR700 Shotgun Condenser Video Microphone comes with a 1 Year Movo Warranty. Movo's support center is based in the U.S.A.

For technical assistance, warranty claims, or any questions regarding your product, please refer to the contact information provided on the included comment card or visit the official Movo weblloc.