1. Introducció
This manual provides detailed instructions for the installation, operation, and troubleshooting of the avedio links HDMI Extender. This device allows for the extension of HDMI audio and video signals over a single Cat5e/6/7 Ethernet cable, supporting resolutions up to 1080P Full HD and 3D, over distances up to 196 feet (60 meters).
The extender consists of a Transmitter (TX) unit and a Receiver (RX) unit, designed for reliable signal transmission in various environments such as home entertainment, digital signage, and conference rooms.
2. Contingut del paquet
- 1x HDMI Extender Transmitter (TX) Unit
- 1x HDMI Extender Receiver (RX) Unit
- 2x DC 5V Power Adapters
- 1 x manual d'usuari
Ensure all items are present and undamaged. Contact customer support if any components are missing or faulty.
3. Característiques del producte
- Extends HDMI signal up to 196 feet (60 meters) using a single Cat6/7 cable.
- Supports Cat5e cable up to 165 feet (50 meters).
- Supports Full HD 1080P resolution (1920x1080@60Hz) and 3D.
- Compatible with HDMI 1.4a and HDCP 1.4.
- Supports deep color up to 36 bits.
- Supports uncompressed digital audio formats including DTS-HD, Dolby TrueHD, DTS, Dolby-AC3, and DSD.
- Features EDID copy/reset functionality for display compatibility.
- Plug and play operation, no driver installation required.
- Built-in automatic adjustment system for stable signal transmission.
4. Identificació de components
4.1 Transmitter (TX) Unit
- LED d'estat: Indicates power and signal status.
- Entrada HDMI: Connects to the HDMI source device.
- DC/5V: Port d'entrada d'alimentació.
- Botó EDID: For EDID management.
- CAT5e/6/7 Output (RJ45): Connects to the Receiver unit via Ethernet cable.
4.2 Receiver (RX) Unit
- LED d'estat: Indicates power and signal status.
- Sortida HDMI: Connects to the HDMI display device.
- DC/5V: Port d'entrada d'alimentació.
- CAT5e/6/7 Input (RJ45): Connects to the Transmitter unit via Ethernet cable.
5. Instruccions de configuració
Follow these steps to set up your avedio links HDMI Extender:
- Apagueu els dispositius: Ensure all HDMI source devices (e.g., PC, Blu-ray player, Fire Stick) and display devices (e.g., HDTV, projector) are powered off before making connections.
- Connect HDMI Source to TX: Use a high-quality HDMI cable to connect your HDMI source device to the Entrada HDMI port on the Transmitter (TX) unit.
- Connect TX to RX via Ethernet: Connect one end of a Cat5e/6/7 Ethernet cable to the CAT5e/6/7 Output (RJ45) port on the Transmitter (TX) unit. Connect the other end of the Ethernet cable to the CAT5e/6/7 Input (RJ45) port on the Receiver (RX) unit.
- For optimal performance, a Cat6 or Cat7 cable is recommended.
- Maximum length for Cat6/7 is 196 feet (60 meters).
- Maximum length for Cat5e is 165 feet (50 meters).
- Avoid using flat Ethernet cables or Cat5 cables, as they may not provide stable transmission.
- Connect RX to HDMI Display: Use a high-quality HDMI cable to connect your HDMI display device to the Sortida HDMI port on the Receiver (RX) unit.
- Aplicar potència: Connect the included DC 5V power adapters to the DC/5V ports on both the Transmitter (TX) and Receiver (RX) units. Plug the power adapters into a power outlet. The Status LEDs on both units should illuminate.
- Dispositius d'encesa: Power on your HDMI display device first, then power on your HDMI source device. The video and audio signal should now be extended to your display.
6. Gestió EDID
The EDID (Extended Display Identification Data) function ensures compatibility between the source and display devices. The avedio links HDMI Extender features an EDID button on the Transmitter (TX) unit for managing display information.
- EDID Copy Mode:
- Connect your primary display directly to the HDMI source device.
- Connect the HDMI Extender as described in Section 5, ensuring the display is connected to the RX unit's HDMI output.
- With all devices powered on and a signal present, press the Botó EDID on the Transmitter (TX) unit once. The extender will copy the EDID information from the connected display to ensure optimal compatibility.
- EDID Reset Mode:
- If you encounter display issues or wish to revert to a default EDID setting, press and hold the Botó EDID on the Transmitter (TX) unit for 3 seconds. This will reset the EDID to a default 1080p 3D stereo setting.
7. Solució De Problemes
If you experience issues with the HDMI Extender, refer to the following troubleshooting steps:
- No Picture or Signal:
- Ensure both the TX and RX units are powered on and their Status LEDs are illuminated.
- Verify all HDMI and Ethernet cables are securely connected.
- Test the HDMI cables directly between the source and display to confirm they are functional.
- Ensure the Ethernet cable is a Cat5e, Cat6, or Cat7 cable and is within the recommended length limits (165ft for Cat5e, 196ft for Cat6/7). Avoid Cat5 cables.
- Try a different Ethernet cable, preferably a high-quality Cat6 or Cat7 UTP cable. Flat cables may cause issues.
- Perform an EDID copy (refer to Section 6) to ensure compatibility with your display.
- Try resetting the EDID to default (refer to Section 6).
- Power cycle all devices (source, extender units, display) in the correct order: display first, then source.
- Senyal intermitent o parpellejant:
- This often indicates a poor quality or excessively long Ethernet cable. Replace the Ethernet cable with a shorter, higher-quality Cat6 or Cat7 cable.
- Ensure there are no strong electromagnetic interference sources near the Ethernet cable.
- Check power connections for stability.
- Sense àudio:
- Verifiqueu la configuració d'àudio al dispositiu i la pantalla font.
- Assegureu-vos que els cables HDMI admetin la transmissió d'àudio.
- Perform an EDID copy or reset.
- Picture Quality Issues (e.g., blurry, color distortion):
- Check the resolution settings on your source device. Ensure it is compatible with the extender and display.
- Use shorter, higher-quality HDMI and Ethernet cables.
8. Especificacions
| Característica | Especificació |
|---|---|
| Versió HDMI | HDMI 1.4a |
| Versió HDCP | HDCP 1.4 |
| Resolucions suportades | 1080p/1080i/720p/576p/576i/480p/480i (24/50/60fs) |
| Suport 3D | Sí |
| Suport de color profund | 36 bits |
| Ample de banda màxim de transmissió | 6.75 Gbps |
| Formats d'àudio compatibles | DTS-HD/Dolby-true HD/DTS/Dolby-AC3/DSD |
| Ethernet Cable Requirement | Cat5e/6/7 (UTP recommended) |
| Max Extension Distance (Cat5e) | 165 peus (50 metres) |
| Max Extension Distance (Cat6/7) | 196 peus (60 metres) |
| Input/Output HDMI Cable Distance | Up to 49 feet (15 meters) AWG26 HDMI standard cable |
| Font d'alimentació | DC 5V/1A (2 units included) |
| Temperatura de funcionament | De 0 °C a 40 °C (32 °F a 104 °F) |
| Humitat de funcionament | 5% a 90% HR (sense condensació) |
| Dimensions (each unit) | Aproximadament 5.31 x 3.94 x 2.76 polzades (dimensions del paquet) |
| Weight (each unit) | Aproximadament 8.8 unces (pes de l'article) |
9. Informació de seguretat
- No exposeu aquesta unitat a l'aigua, la humitat o una humitat excessiva.
- No col·loqueu la unitat a la llum solar directa ni a prop de fonts de calor.
- Use only the provided power adapters. Using unauthorized power adapters may damage the device and void the warranty.
- No intenteu obrir ni reparar la unitat vosaltres mateixos. Encarregueu tot el manteniment a personal qualificat.
- Mantingueu el dispositiu lluny dels nens.
- Assegureu-vos de ventilar adequadament al voltant de les unitats per evitar el sobreescalfament.
10. Atenció al client
For technical assistance or product inquiries, please contact avedio links customer support. Refer to the product packaging or the official avedio links weblloc per obtenir informació de contacte.
Please have your product model number (HDMI Extender 196FT) and purchase details ready when contacting support.
