1. Introducció
This manual provides detailed instructions for the Waveshare 4.2inch E-Ink Raw Display. This display features a 400x300 resolution and communicates via an SPI interface. It is designed for integration with various development boards, including Raspberry Pi, Jetson Nano, Arduino, and STM32 series boards.
Key features include ultra-low power consumption, a wide viewing angle, and the ability to retain content without continuous power, making it suitable for applications such as electronic shelf labels and industrial instrumentation.
Image 1.1: The Waveshare 4.2inch E-Ink Raw Display, showing its dimensions and resolution.
2. Contingut del paquet
El paquet conté el següent article:
- 1x 4.2inch E-Paper Raw Display
Note: This is a raw display module. A separate driver board is required for operation. For easier testing and comparison, consider purchasing an assembled variant like the 4.2inch e-Paper Module with a driver board.
Image 2.1: Contents of the product package, featuring the 4.2inch E-Paper display.
3. Features At A Glance
- No backlight required, maintaining display content even when powered off.
- Ultra-low power consumption, with power primarily needed only during refresh cycles.
- Ample viewing angle, offering clear visibility from various perspectives.
- 400x300 pixel resolution for clear text and graphics.
- 4 gray scale support for enhanced visual detail.
- SPI interface for communication with microcontrollers.
- Online development resources and example code available for Raspberry Pi, Jetson Nano, Arduino, and STM32.
Imatge 3.1: acabatview of the 4.2-inch E-Paper display's key characteristics and features.
4. Especificacions
| Paràmetre | Valor | Paràmetre | Valor |
|---|---|---|---|
| Vol. Operatiutage | 3.3 V | Color de la pantalla | Negre/Blanc |
| Interfície | SPI de 3 fils, SPI de 4 fils | Escala de grisos | 4 |
| Dimensions del contorn | 91.0 x 77.0 x 1.18 mm | Full Refresh Time | 5s |
| Mida de la pantalla | 84.8 x 63.6 mm | Fast Refresh Time | 1s/1.5s* |
| Mida de punt | 0.212 x 0.212 mm | Partial Refresh Time | 0.4 s |
| Viewangle ing | >170° | Refresh Power | 26.4mW (typical) |
| Resolució | 400 x 300 píxels | Corrent d'espera | <0.01uA (almost none) |
*Fast refresh function is only available in V2 version.
Image 4.1: Detailed technical specifications of the 4.2inch E-Ink display.
5. Avançtages of E-Ink Technology
E-paper displays utilize microcapsule electrophoretic technology for displaying content. The principle involves charged particles suspended in a clear fluid moving to the sides of microcapsules when an electric field is applied. This process makes the microcapsule visible by reflecting ambient light, similar to traditional printed paper.
E-paper displays clearly show images and text under natural light or lamplight, requiring no backlight. They offer a wide viewing angle, nearly up to 180 degrees. This technology is often used in e-readers due to its paper-like visual effect, which reduces eye strain.
Image 5.1: Visual comparison highlighting the clarity and paper-like appearance of E-Ink displays.
6. Aplicació Examples
The Waveshare 4.2inch E-Ink Raw Display is suitable for a variety of applications due to its unique characteristics:
- Asset/Equipment Tags: For inventory management and tracking.
- Shelf Labels: Dynamic pricing and product information in retail environments.
- Conference Name Tags: Reusable and customizable identification for events.
- Industrial Instruments: Displaying data in low-power or harsh environments.
- Dispositius domèstics intel·ligents: Information displays with minimal power draw.
Imatge 6.1: Ex.amples of practical applications for E-Ink display technology.
7. Configuració i connexió
This 4.2inch E-Ink display is a raw panel and does not include an integrated driver board. To operate this display, it must be connected to a compatible driver board or microcontroller with SPI capabilities.
7.1 Components necessaris
- Waveshare 4.2inch E-Ink Raw Display (this product)
- Compatible Driver Board (e.g., Waveshare e-Paper Driver HAT for Raspberry Pi, e-Paper ESP32 Driver Board, e-Paper Shield for Arduino/NUCLEO)
- Connecting cables (typically FPC cable, depending on the driver board)
- Development environment for your chosen microcontroller (e.g., Arduino IDE, Python for Raspberry Pi)
7.2 Connection Steps (General)
- Identifica els pins: Refer to the pinout diagram of your chosen driver board and the 4.2inch E-Ink display. Common pins include VCC (power), GND (ground), DIN (MOSI), CLK (SCK), CS (Chip Select), DC (Data/Command), RST (Reset), and BUSY.
- Connect Display to Driver Board: Carefully connect the flexible printed circuit (FPC) cable of the E-Ink display to the corresponding connector on your driver board. Ensure correct orientation to avoid damage.
- Connect Driver Board to Microcontroller: Connect your driver board to your Raspberry Pi, Arduino, ESP32, or other microcontroller using the appropriate headers or cables.
- Encès: Apply power to your microcontroller and driver board setup.
- Configuració del programari: Install the necessary libraries and example code for your specific driver board and microcontroller. Waveshare provides extensive online documentation and examples for various platforms.
For detailed pin connections and programming examples, please refer to the official Waveshare online user manual and documentation for your specific driver board and microcontroller combination. A good starting point is the Waveshare Wiki for e-Paper displays.
Image 7.1: Recommended solutions for connecting and driving the raw E-Ink display.
8. Funcionament de la pantalla
Operating the 4.2inch E-Ink display primarily involves sending commands and data via the SPI interface from your microcontroller to the display's embedded controller. The display supports full refresh and partial refresh modes.
8.1 Display Refresh
- Full Refresh: This mode clears the entire screen and redraws all pixels. It provides the highest image quality and prevents ghosting but takes longer (approx. 5 seconds) and consumes more power. It is recommended for displaying static images or when significant content changes occur.
- Partial Refresh: This mode updates only a specific area of the screen. It is much faster (approx. 0.4 seconds) and consumes less power, making it suitable for dynamic content updates like clocks or sensor readings. However, repeated partial refreshes over time may lead to slight ghosting, which can be cleared with a full refresh.
8.2 Consum d'energia
E-Ink displays are known for their ultra-low power consumption. Power is primarily consumed during the refresh cycle. In standby mode, the display draws less than 0.01uA, making it ideal for battery-powered applications where content does not change frequently.
8.3 Visualització de contingut
Your microcontroller code will typically:
- Initialize the SPI interface and display pins (CS, DC, RST, BUSY).
- Send initialization commands to the E-Ink controller.
- Prepare the image data (bitmap) to be displayed.
- Send the image data to the display buffer.
- Issue a refresh command (full or partial) to update the screen.
Refer to the Waveshare example code for your specific microcontroller and driver board for detailed programming instructions and library usage.
9. Manteniment i cura
To ensure the longevity and optimal performance of your Waveshare 4.2inch E-Ink Raw Display, follow these maintenance guidelines:
- Manejar amb cura: The display panel is fragile. Avoid bending, dropping, or applying excessive pressure to the screen.
- Netegeu suaument: Feu servir un drap suau i sense borrissol, lleugerament humitampened with water or a mild screen cleaner, to gently wipe the display surface. Avoid harsh chemicals, abrasive materials, or excessive moisture.
- Eviteu temperatures extremes: Operate and store the display within its specified temperature range (typically 0°C to 50°C). Extreme cold or heat can affect performance and lifespan.
- Protect from UV Light: Prolonged exposure to direct sunlight or strong UV light can degrade the display over time.
- Electricitat estàtica: E-Ink displays are sensitive to static discharge. Handle the display in an anti-static environment or use appropriate grounding measures.
- Gestió d'energia: While E-Ink retains content without power, frequent power cycling or improper power-down sequences can potentially stress the display controller. Follow recommended power procedures in your driver board's documentation.
10. Solució De Problemes
If you encounter issues with your 4.2inch E-Ink Raw Display, consider the following troubleshooting steps:
10.1 Display Not Refreshing or Blank Screen
- Comproveu les connexions: Ensure all FPC cable connections are secure and correctly oriented. Verify SPI pin connections (VCC, GND, DIN, CLK, CS, DC, RST, BUSY) between the display, driver board, and microcontroller.
- Font d'alimentació: Confirm that the microcontroller and driver board are receiving adequate power (3.3V for the display).
- Reset Pin: Ensure the RST pin is correctly toggled during initialization. An improper reset sequence can prevent the display from starting.
- Busy Pin: The BUSY pin indicates when the display is performing an operation. Your code should wait for the BUSY signal to clear before sending new commands. If the BUSY pin is stuck high or low, it might indicate a communication issue or a display fault.
- Software/Code: Double-check your code for correct SPI communication protocols, display initialization sequences, and image data formatting. Refer to Waveshare's example code for verification.
10.2 Ghosting or Image Retention
- Full Refresh: Perform a full refresh cycle. This is the primary method to clear residual images or ghosting.
- Partial Refresh Limits: If using partial refresh frequently, occasional full refreshes are necessary to prevent ghosting buildup.
- Cicle d'alimentació: A complete power cycle (disconnecting and reconnecting power) can sometimes resolve persistent ghosting issues.
10.3 Display Damage
- Danys físics: Inspect the display for cracks, punctures, or visible damage. E-Ink panels are delicate.
- Vol incorrectetage: Aplicació de volum incorrectetage can permanently damage the display. Ensure 3.3V operation.
For further assistance, consult the Waveshare Wiki or contact their technical support.
11. Cotes del contorn
The physical dimensions of the 4.2inch E-Ink Raw Display are provided below for integration and design purposes. All measurements are in millimeters (mm).
Image 11.1: Detailed outline dimensions of the 4.2inch E-Ink display.
12. Suport i Recursos
For additional technical documentation, example code, and community support, please visit the official Waveshare Wiki and product page. The online resources provide comprehensive guides for integrating this display with various development platforms.
Online User Manual and Examples: Waveshare 4.2inch e-Paper Wiki
Fabricant: Waveshare
Número de model: Paper electrònic d'4.2 polzades
ASIN: B0751F5T5G
Warranty information is typically provided at the point of purchase or on the manufacturer's official weblloc.
