Blum Tandem 563H Series Drawer Slides with BLUMOTION

1. Producte acabatview

The Blum Tandem 563H Series Drawer Slides with BLUMOTION are premium undermount drawer slides designed for smooth, quiet operation and enhanced functionality in cabinetry. This complete kit is suitable for both face frame and frameless cabinet constructions.

• Extensió completa: Allows complete access to the drawer contents.
• Soft Closing (BLUMOTION): Integrat damping system ensures drawers close silently and effortlessly.
• Alta capacitat de càrrega: Supports a static load of up to 100 lbs.
• Four-Dimensional Adjustment: Provides precise alignment for optimal drawer fit.
• Aplicació versàtil: Compatible with 1/2" - 5/8" drawer side thickness for face frame or frameless cabinets.

2. Components inclosos

Each 18-inch set of 6 includes the following components:

• 12 x Tandem 563H Runners (6 pairs)
• 12 x Locking Devices (6 pairs)
• 12 x Rear Mounting Brackets (6 pairs, for face frame applications only)
• Cargols per a la instal·lació

3. Instal·lació

Proper installation is crucial for optimal performance. Refer to the diagrams and video for detailed steps.

3.1. Drawer Specifications and Preparation

Ensure your drawer dimensions meet the specifications for the 563H series. The drawer side thickness should be between 1/2" and 5/8".

• Calculating Outside Drawer Width: Refer to the provided diagrams for precise measurements based on your cabinet type (face frame or frameless).
• Pre-boring Holes: Use a 6mm bit with a stop collar for pre-boring holes for locking devices and rear hooks.

3.2. Mounting Runners

Extend the concealed runners fully. Place the drawer on the runners and close. Make adjustments if necessary.

• Face Frame Application: Use the rear mounting brackets to secure the runners to the back of the cabinet.
• Frameless/Panel Application: Runners can be mounted directly to the cabinet side or bottom.

3.3. Extracció del calaix

To remove a drawer, squeeze the orange release levers located under each side of the drawer and pull the drawer straight out.

3.4. Guia de vídeo d'instal·lació

Watch this video for a visual guide on how to install and operate the Blum Tandem drawer slides.

4. Ajustaments

The Blum Tandem 563H series offers four-dimensional adjustment capabilities to achieve perfect drawer alignment.

• Ajust de costat a costat: Rotate the side-to-side adjustment screw on the locking device to move the drawer front left or right.
• Rear Side-to-Side Adjustment: After front adjustment, rotate the rear locking device screws to realign the back of the drawer box.
• Ajust d'alçada: Press up on the adjustment tab and push towards the back of the drawer to adjust height.
• Ajust d'inclinació: Rotate the tilt adjustment lever on the rear of each runner to lift the back of the drawer and tilt the top of the drawer front forward.
• Ajust de profunditat: Elongated holes on the runners allow for depth adjustment. Turning the adjustment screw on the depth adjustable locking device (T51.1901.PS) allows for precise depth adjustments.

5. Funcionament

The Blum Tandem 563H series drawer slides are designed for smooth and reliable operation.

• Extensió completa: Drawers extend completely, providing full access to contents.
• Tancament suau: The integrated BLUMOTION mechanism ensures that drawers close gently and quietly, preventing slamming.
• Capacitat de càrrega: These slides are rated for a static load-bearing capacity of 100 lbs, suitable for various drawer contents.

5.1. Operation Video Guide

Observe the smooth soft-close operation of the Blum Tandem drawer slides in this video.

6. Manteniment

To ensure the longevity and continued smooth operation of your Blum Tandem drawer slides, follow these simple maintenance guidelines:

• Neteja: Periodically wipe down the runners with a clean, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
• Lubricació: The slides are designed for maintenance-free operation and typically do not require lubrication. If any squeaking or stiffness occurs, consult Blum's official support for recommendations.
• Comprovació de fixació: Occasionally check all mounting screws to ensure they are tight. Loose screws can affect performance and stability.

7. Solució De Problemes

If you encounter issues with your drawer slides, consider the following common troubleshooting steps:

• Drawer Binding or Sticking: This often indicates misalignment. Use the four-dimensional adjustment features (side-to-side, height, tilt, depth) to fine-tune the drawer's position. Ensure the cabinet opening is square and the runners are installed parallel.
• Drawer Not Closing Softly: Check for any obstructions in the slide mechanism. Ensure the BLUMOTION unit is not damaged. Verify that the drawer is not overloaded beyond the 100 lbs capacity.
• Drawer Not Extending Fully: Inspect the runners for any debris or damage that might be impeding full extension. Confirm that the drawer box is correctly seated on the locking devices.
• Noises During Operation: Ensure all screws are securely fastened. Check for any loose components or foreign objects within the slide mechanism.

If problems persist after attempting these steps, contact Blum customer support for further assistance.

8. Especificacions

9. Garantia i Suport

For specific warranty information regarding your Blum Tandem 563H Series Drawer Slides, please refer to the documentation provided with your purchase or visit the official Blum weblloc. Els termes i condicions de la garantia poden variar.

For technical support, installation assistance, or to inquire about replacement parts, please contact Blum customer service directly through their official channels.