Blum B970.1002-5

Blum Blumotion Soft Close Damper

Model: B970.1002-5

1. Introducció

Thank you for choosing the Blum Blumotion Soft Close Damper. This product is designed to provide a quiet and gentle closing action for cabinet doors, preventing slamming and reducing wear. This manual provides detailed instructions for the proper installation, operation, and maintenance of your Blumotion dampers

2. Informació de seguretat

3. Contingut del paquet

El vostre paquet ha de contenir els elements següents:

4. Instal·lació

The Blumotion damper is designed for easy installation into a 10mm bullet hole. Follow these steps for optimal performance:

  1. Identify Installation Location: Determine the best location on your cabinet frame or door to install the damper. It should be positioned so that the cabinet door makes contact with the damper when closing. Typically, this is on the cabinet frame near the hinge side.
  2. Perforar el forat: Using a 10mm drill bit, carefully drill a hole approximately 50mm (2 inches) deep into the chosen location. Ensure the hole is straight and clean.
  3. Insereix el Damper: Gently push the Blumotion damper into the drilled hole. The damper should fit snugly. If it is too loose, the hole may be too large. If it is too tight, do not force it, as this may damage the dampeh.
  4. Funcionalitat de prova: Close the cabinet door slowly to ensure it makes contact with the damper and closes softly. Adjust the position if necessary. For optimal soft-closing, multiple dampers may be required for larger or heavier doors.
Blum Blumotion Soft Close Damper, angled view

Figura 1: Angle view of the Blum Blumotion Soft Close Damper. This image shows the cylindrical body and the grey soft-close tip.

Blum Blumotion Soft Close Damper, straight view

Figure 2: Straight-on view of the Blum Blumotion Soft Close Damper. This image highlights the full length of the damper and its grey tip.

5. Funcionament

Once installed, the Blumotion damper operates automatically. As the cabinet door closes, it will make contact with the damper's tip. The internal mechanism of the damper will then slow down the door's movement, ensuring a gentle and silent close. No manual adjustment is typically required after proper installation.

6. Manteniment

The Blumotion Soft Close Damper requires minimal maintenance:

7. Solució De Problemes

ProblemaCausa possibleSolució
Door does not close softly.Damper not making proper contact with the door, or door is too heavy for a single dampeh.Assegureu-vos que el damper is positioned correctly. For heavier doors, consider installing an additional dampeh.
Damper falls out of the hole.Hole is too large, or damper was not fully inserted.Re-insert the damper firmly. If the hole is too large, a small amount of wood glue or a similar adhesive can be used to secure it.
Door still slams.Damper is faulty or not installed correctly.Verify installation steps. If the issue persists, the damper may need replacement.

8. Especificacions

9. Garantia i Suport

For specific warranty information, please refer to the documentation provided with your purchase or contact Blum directly. For technical support or further assistance, please visit the official Blum weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.

Blum Official Weblloc: www.blum.com

Documents relacionats - B970.1002-5

Preview Blum Hardware: Ajustaments sense esforç per a un disseny d'armaris impecable
Descobreix com els innovadors sistemes d'elevació, els sistemes de caixa, els sistemes de frontisses i els sistemes de butxaca de Blum permeten ajustaments tridimensionals sense esforç per a una alineació perfecta dels armaris i un disseny impecable. Aprèn sobre l'aplicació EASY ASSEMBLY per obtenir una guia ràpida.
Preview Sistemes d'elevació Blum AVENTOS: Millora els teus armaris
Exploreu els innovadors sistemes d'elevació AVENTOS de Blum per a armaris superiors. Descobriu solucions per a un accés sense esforç, un funcionament suau i un tancament suau, dissenyades per millorar la cuina i els espais habitables. Trobeu especificacions detallades i informació de comandes.
Preview Blum TIP-ON BLUMOTION per a TANDEMBOX: Característiques, planificació i comanda
Guia completa del sistema TIP-ON BLUMOTION de Blum per a calaixos TANDEMBOX, amb detalls de les característiques, especificacions tècniques, informació de comanda i requisits de planificació per a un funcionament suau i silenciós dels calaixos.
Preview Instruccions d'instal·lació i especificacions de Blum TANDEM plus BLUMOTION 563F
Instruccions d'instal·lació i especificacions per a les guies ocultes per a calaixos Blum TANDEM plus BLUMOTION 563F d'extensió completa. Cobreix la preparació, el muntatge, els ajustos i els tipus d'aplicació de la caixa del calaix (marc frontal, sense marc, encastat).
Preview Blum REVEGO Pocketsysteme: Planungs- und Bestellinformationen
Entdecken Sie REVEGO Pocketsysteme von Blum für moderne Raumkonzepte. Dieses Dokument bietet detaillierte Planungs-, Auswahl- und Bestellinformationen für Einzeltür- und Doppeltüranwendungen.
Preview Sistemes d'elevació Blum AVENTOS: Guia completa de productes
Exploreu els innovadors sistemes d'elevació AVENTOS de Blum, dissenyats per a cuines i armaris moderns. Descobriu les característiques, les aplicacions, la planificació i els detalls d'instal·lació de diversos models com HF, HS, HL, HK, HK-S i HK-XS, incloses les solucions SERVO-DRIVE i TIP-ON.