Manual d'instruccions de l'additiu d'esbandida ultra seca Ecolab Ecotemp

1. Producte acabatview

The Ecolab Ecotemp Ultra Dry is a high-performance rinse additive specifically formulated for use in energy-efficient machine warewashing systems. This product is designed to enhance drying performance, reduce water spotting, and improve the overall appearance of washed items. It is supplied in a convenient one-gallon container, ensuring efficient operation in commercial dishwashing environments.

Figure 1: Ecolab Ecotemp Ultra Dry Rinse Additive 1-gallon container.

2. Informació de seguretat

This product is intended for professional use in machine warewashing applications. Always handle chemical products with care and adhere to all safety guidelines. Review the Safety Data Sheet (SDS) for comprehensive safety information before use.

• MANTENIU FORA DE L'ACCESSIT DELS NENS.
• In case of contact with eyes, rinse immediately with plenty of water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention if irritation persists.
• If swallowed, do not induce vomiting. Rinse mouth with water and seek medical advice immediately. Show this container or label to the medical professional.
• Wear appropriate personal protective equipment (PPE) such as gloves and eye protection when handling.
• Store in a cool, dry, well-ventilated area, away from incompatible materials and direct sunlight.

Figure 2: Product label detailing safety warnings and usage information.

3. Ingredients

The formula ingredients of Ecolab Ecotemp Ultra Dry contain less than 0.1% Phosphorus, with 0.0009 g (0.00003 oz) per use at recommended concentration. For a complete list of ingredients, refer to the product's Safety Data Sheet (SDS).

4. Configuració

1. Inspeccionar l'equip: Before initial use, ensure the warewashing machine and its rinse additive dispenser are clean and free from any obstructions or residue.
2. Locate Dispenser: Identify the designated rinse additive dispenser in your machine. This is typically a separate reservoir or inlet port.
3. Calibrate Dispenser: Ensure the dispenser is properly calibrated according to your machine's manufacturer guidelines. Correct calibration is crucial for optimal performance and cost efficiency.
4. Connect/Pour Product: Carefully connect the product container to the dispenser's intake tube or pour the product directly into the dispenser reservoir, following the machine manufacturer's instructions.

5. Instruccions de funcionament

Ecolab Ecotemp Ultra Dry is designed for automatic dispensing during the rinse cycle of your machine warewashing process. Follow these general steps:

1. Ensure Supply: Verify that the rinse additive dispenser contains an adequate supply of Ecolab Ecotemp Ultra Dry.
2. Load Machine: Load dishes, glassware, and utensils into the warewashing machine according to the manufacturer's recommendations.
3. Seleccioneu el cicle: Choose the appropriate wash cycle for the items being cleaned.
4. Inici de la màquina: Initiate the wash cycle. The rinse additive will be automatically dispensed during the final rinse phase.
5. Monitoritzar el rendiment: Observe the drying performance and adjust dispenser settings if necessary to achieve desired results (e.g., streak-free, spot-free drying).

Always refer to your specific warewashing machine's operation manual for detailed instructions on rinse additive usage and machine settings.

6. Manteniment

Regular maintenance of your warewashing system and rinse additive dispenser ensures consistent performance and longevity of your equipment.

• Dispenser Inspection: Periodically inspect the rinse additive dispenser and its tubing for any blockages, leaks, or residue buildup. Clean as needed to ensure uninterrupted product flow.
• Emmagatzematge: Store the Ecolab Ecotemp Ultra Dry container in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the cap is tightly sealed after each use to prevent contamination or evaporation.
• Neteja del sistema: Follow your warewashing machine manufacturer's recommendations for routine cleaning and descaling to maintain optimal performance.

7. Solució De Problemes

If you encounter issues with drying performance, consider the following troubleshooting steps:

• Poor Drying Performance / Water Spots:
  • Check if the rinse additive dispenser is empty or low. Refill as necessary.
  • Verify that the dispenser is functioning correctly and dispensing the product during the rinse cycle.
  • Ensure the machine's final rinse temperature is within the recommended range (typically 180-195°F / 82-90°C) for effective drying.
  • Consult your machine's manual for specific settings related to rinse aid dosage and adjust if needed.
• Excessive Foaming:
  • Confirm that the correct product is being used for the rinse cycle.
  • Check for detergent carry-over into the rinse cycle. Adjust detergent dosage or rinse cycles if needed.

For persistent issues or technical assistance, please contact Ecolab customer support or your authorized service technician.

8. Especificacions

9. Garantia i Suport

For product support, technical assistance, or information regarding potential warranties, please contact Ecolab directly through their official website or customer service channels. You can also visit the Ecolab Store on Amazon per a més informació.