1. Introducció i finalview
Thank you for choosing the Princess 236023 Stainless Steel Kettle. This compact 1.0-litre electric kettle is designed for efficient and safe water boiling, perfect for preparing up to five cups of your favorite hot beverages. Its cordless design and advanced safety features ensure ease of use and long-term reliability.
Key features include a powerful 2200W heating element for rapid boiling, a high-quality Strix controller, and a 360-degree rotatable base for convenient placement. The kettle also incorporates triple-level safety measures, including an automatic shut-off and boil-dry protection.
Figure 1: Princess 236023 Stainless Steel Kettle with a cup of tea. This image shows the kettle's sleek design, water level indicator, and power switch.
2. Instruccions de seguretat
Please read all safety instructions carefully before using the appliance. Retain this manual for future reference.
- Seguretat elèctrica: Assegureu-vos que el voltagEl volum indicat a l'aparell coincideix amb la xarxa elèctrica localtage before connecting. Do not operate the kettle with a damaged cord or plug.
- Nivell d'aigua: Never fill the kettle above the MAX (1.0L) mark or below the MIN mark to prevent boiling dry or overflowing.
- Protecció en sec: The kettle is equipped with boil-dry protection, which automatically switches off the heating element if the kettle is accidentally switched on without water or with insufficient water. If this occurs, allow the kettle to cool down before refilling.
- Apagat automàtic: The kettle will automatically switch off once the water has boiled (100°C).
- Superfícies calentes: The kettle body, especially the lid, becomes hot during operation. Always handle the kettle by its insulated handle. Avoid touching hot surfaces.
- Col·locació: Place the kettle on a stable, flat, heat-resistant surface, away from edges and out of reach of children. Do not place near hot gas or electric burners, or in a heated oven.
- Infants i supervisió: Aquest aparell el poden utilitzar nens a partir de 8 anys i persones amb capacitats físiques, sensorials o mentals reduïdes o amb manca d'experiència i coneixements si han rebut supervisió o instruccions sobre l'ús de l'aparell d'una manera segura i entenen els perills que comporta. . Els nens no han de jugar amb l'aparell. La neteja i el manteniment dels usuaris no els han de fer els nens sense supervisió.
- Sense BPA: This kettle is made of stainless steel and does not contain Bisphenol A (BPA).
- Olor de primer ús: During the first few boiling cycles, a slight burning smell may be noticeable. This is normal and will dissipate with subsequent uses.
3. Components del producte
Familiarize yourself with the parts of your Princess kettle:
- Cos del bullidor (acer inoxidable)
- Tapa
- Mànec
- Water Level Indicator (with MIN/MAX markings)
- Power Switch with Indicator Light
- Broquet amb filtre
- 360° Rotatable Power Base
- Cord Storage (under the base)
Figura 2: posterior view of the kettle, highlighting the ergonomic handle and the position of the power switch.
Figura 3: Detallada view of the water level indicator, showing MIN, 0.5L, 0.75L, and MAX 1.0L markings.
4. Configuració
- Desembalatge: Traieu amb cura el bullidor i tots els accessoris de l'embalatge. Desfeu-vos dels materials d'embalatge de manera responsable.
- Col·locació: Place the power base on a dry, flat, and stable surface. Ensure the power cord is not dangling or in a position where it can be tripped over.
- Neteja de primer ús: Before first use, fill the kettle with clean water to the MAX level. Boil the water, then discard it. Repeat this process two to three times to remove any manufacturing residues and the initial odor.
- Gestió de cordons: The power base features integrated cord storage. Adjust the cord length as needed to keep your countertop tidy and safe.
Figure 4: The underside of the kettle's power base, illustrating the integrated cord storage system.
5. Instruccions de funcionament
- Ompliu la tetera: Open the lid and fill the kettle with the desired amount of fresh water. Observe the water level indicator to ensure the water is between the MIN and MAX marks. Close the lid securely.
- Lloc a la base: Place the kettle firmly onto its 360-degree rotatable power base. The cordless design allows for easy placement from any angle, suitable for both left and right-handed users.
- Connecteu-vos a l'alimentació: Connecteu el cable d'alimentació a una presa de corrent adequada.
- Encendre: Press the power switch located at the bottom of the handle downwards. The indicator light will illuminate, signaling that the kettle is heating.
- Procés d'ebullició: The water will begin to heat rapidly due to the 2200W heating element.
- Apagat automàtic: Once the water reaches boiling point, the kettle will automatically switch off, and the indicator light will extinguish.
- Abocament: Carefully lift the kettle from its base by the handle and pour the hot water. Be cautious of steam escaping from the spout and lid.
- Switch Off Manually (Optional): You can manually switch off the kettle at any time by pushing the power switch upwards.
Figura 5: Primer pla view of the power switch with its illuminated indicator, showing the kettle in operation.
6. Neteja i Manteniment
Una neteja i un manteniment regulars allargaran la vida útil de la teva tetera.
- Abans de la neteja: Desendolleu sempre el bullidor de la presa de corrent i deixeu-lo refredar completament abans de netejar-lo.
- Neteja exterior: Netegeu l'exterior de la tetera amb un damp drap. No utilitzeu productes de neteja abrasius ni fregalls, ja que poden danyar l'acabat d'acer inoxidable.
- Neteja i descalcificació interior: The hidden heating element makes interior cleaning easier, reducing limescale buildup in hard-to-reach areas.
- To descale, fill the kettle with a mixture of water and white vinegar (1:1 ratio) or a commercial descaling solution.
- Bulliu la barreja i deixeu-la reposar durant almenys 30 minuts, o més si hi ha acumulacions importants.
- Buideu la tetera i esbandiu-la bé amb aigua neta diverses vegades per eliminar qualsevol residu i l'olor de vinagre.
- Neteja de filtres: The spout filter prevents limescale particles from entering your cup. Remove the filter (if detachable) and rinse it under running water. Reinsert it securely.
- Emmagatzematge: When not in use, ensure the kettle is clean and dry. You can wrap the power cord around the cord storage area under the base for neat storage.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El bullidor d'aigua no s'encén. | No està connectat; l'interruptor no està premut; no hi ha corrent a la presa de corrent. | Ensure plug is securely in outlet. Press power switch down. Check outlet with another appliance. |
| L'aigua no bull. | Kettle not switched on; boil-dry protection activated. | Press power switch down. If boil-dry protection activated, allow kettle to cool before refilling and restarting. |
| El bullidor s'apaga abans de bullir. | Acumulació excessiva de calç. | Descale the kettle as described in the "Cleaning and Maintenance" section. |
| Burning smell during first few uses. | Normal manufacturing residue. | This is normal and will disappear after a few boiling cycles. Ensure initial cleaning steps were followed. |
| L'aigua té un gust metàl·lic o inusual. | New appliance residue; limescale buildup. | Perform initial cleaning and boiling cycles. Descale if necessary. |
8. Especificacions
| Característica | Detall |
|---|---|
| Marca | Princesa |
| Número de model | 236023 (01.236023.01.001) |
| Capacitat | 1.0 litres |
| Poder | 2200 watts |
| Voltage | 230 Volts |
| Material | Acer inoxidable |
| Color | Negre, Acer inoxidable |
| Dimensions (L x A x A) | 20.7 x 17.8 x 22.7 cm |
| Pes | 780 grams |
| Característiques especials | Anti-slip feet, Water level indicator, Boil-dry protection, Filtering, Automatic power cut-off, 360° rotatable base. |
| Nivell de soroll | 44 decibels |
9. Garantia i Suport
Garantia: Princess offers a 24-month (2-year) warranty on all its products, covering manufacturing defects from the date of purchase.
Recanvis: Availability of spare parts is guaranteed for 1 year from the date of purchase.
For warranty claims, technical support, or inquiries about spare parts, please contact your retailer or the official Princess customer service. Keep your proof of purchase for warranty validation.
