BFT Elba BU Electronic Control Board for Rolling Shutters

Introducció

This manual provides essential information for the proper installation, operation, and maintenance of the BFT Elba BU Electronic Control Board. This control unit is designed for rolling shutters and includes an integrated receiver for BFT MITTO series remote controls. Due to the specialized nature of this product, professional installation by a qualified technician is mandatory to ensure correct functionality and safety.

Informació de seguretat

• Instal·lació professional necessària: This product is intended for professional installation only. Do not attempt DIY installation.
• Desconnexió d'alimentació: Always disconnect power to the system before performing any installation, maintenance, or troubleshooting.
• Seguretat elèctrica: Assegureu-vos que totes les connexions elèctriques compleixin les normatives i normes locals.
• Condicions ambientals: Install the control board in a suitable enclosure, protected from moisture, dust, and extreme temperatures.
• Recanvis originals: Use only original BFT or compatible components for replacements or extensions.

Producte acabatview

The BFT Elba BU is an electronic control board housed within a protective casing, designed to manage the operation of rolling shutters. It features an integrated receiver for seamless compatibility with BFT MITTO series remote controls, allowing for convenient wireless operation. The unit also includes a wired open button connection within its cover for direct control.

Imatge 1: The BFT Elba BU Electronic Control Board. The image displays the control board mounted inside a white protective enclosure. The green circuit board with various electronic components, terminals, and relays is visible on the left side. The right side of the enclosure shows the BFT logo.

Configuració i instal·lació

Installation of the BFT Elba BU control board must be performed by a qualified professional. The following steps are general guidelines and should be supplemented by detailed wiring diagrams and specific instructions provided with the product packaging.

1. Muntatge: Securely mount the control board enclosure in a suitable, protected location near the rolling shutter motor.
2. Connexió d'alimentació: Connect the main power supply to the designated terminals on the control board. Ensure correct voltage i polaritat.
3. Connexió del motor: Connect the rolling shutter motor wires (up, down, common) to the appropriate terminals.
4. Dispositius de seguretat: Integrate any required safety devices, such as photocells or safety edges, according to the wiring diagram.
5. Wired Controls: Connect the wired open button, if used, to its dedicated terminals.
6. Vinculació de control remot: Follow the specific instructions to pair BFT MITTO series remote controls with the integrated receiver.
7. Ajust del commutador de límit: Adjust the motor's limit switches to define the open and closed positions of the rolling shutter.
8. Prova: Thoroughly test all functions, including manual and remote operations, and all safety features, before final commissioning.

Avís: Incorrect installation can lead to serious injury, damage to property, or malfunction of the rolling shutter system. Always consult the full technical documentation and adhere to all safety standards.

Instruccions de funcionament

Once properly installed and configured, the BFT Elba BU control board allows for simple operation of your rolling shutter.

Remote Control Operation (MITTO Series)

• Open/Up: Press the designated button on your paired MITTO remote control to open the rolling shutter.
• Close/Down: Press the designated button on your paired MITTO remote control to close the rolling shutter.
• Atura: Pressing any active button during movement will typically stop the shutter.

Wired Button Operation

• Obert: Press the wired open button located within the control board's cover (if connected) to initiate the opening sequence.

For advanced programming or specific operational modes, refer to the detailed programming guide provided with the control board.

Manteniment

Regular maintenance helps ensure the longevity and reliable operation of your BFT Elba BU control board and rolling shutter system.

• Inspecció visual: Periodically inspect the control board and its wiring for any signs of damage, corrosion, or loose connections.
• Neteja: Keep the enclosure clean and free from dust, debris, and moisture. Do not use abrasive cleaners or solvents.
• Comprovació de la funcionalitat: Regularly test the rolling shutter's operation using both remote controls and wired buttons, as well as all safety devices.
• Servei professional: It is recommended to have the system inspected and serviced by a qualified technician at least once a year.

Precaució: Always disconnect power before performing any maintenance tasks inside the control board enclosure.

Resolució de problemes

This section addresses common issues you might encounter. For complex problems, contact a qualified technician.

Shutter Does Not Respond to Remote Control

• Comproveu la bateria remota: Assegureu-vos que la pila del comandament a distància no estigui esgotada.
• Vinculació remota: Verify that the remote control is correctly paired with the control board's receiver. Re-pair if necessary.
• Font d'alimentació: Confirm the control board has power. Check circuit breakers.
• Antena: Ensure the antenna (if external) is properly connected and not obstructed.

Shutter Does Not Move

• Font d'alimentació: Check if the control board is receiving power.
• Connexió del motor: Verify motor wiring connections are secure.
• Dispositius de seguretat: Ensure no safety devices (e.g., photocells) are obstructed or triggered, preventing movement.
• Interruptors de límit: Check if limit switches are correctly set and not preventing movement.

Shutter Stops Mid-Movement

• Obstrucció: Check for any physical obstructions in the shutter's path.
• Dispositius de seguretat: A safety device might be triggering. Inspect photocells or safety edges.
• Motor Overload: The motor might be overheating or encountering resistance. Allow it to cool down.

Especificacions

Garantia i Suport

Specific warranty information for the BFT Elba BU control board is typically provided by the seller or manufacturer at the time of purchase. Please retain your proof of purchase for warranty claims.

For technical support, installation assistance, or troubleshooting beyond the scope of this manual, please contact your professional installer or the product manufacturer, Matic Line. You may also refer to the official BFT documentation for detailed wiring diagrams and programming instructions.

Fabricant: Matic Line