1. Producte acabatview
The Goodyear Retractable Welding Hose Reel is a heavy-duty, industrial-grade solution designed for efficient and safe management of twin oxygen and acetylene hoses. Constructed from robust steel, this reel features a spring-driven retraction system that locks the hose at any desired length, promoting a tidy and safe workspace. It is equipped with premium rubber hoses resistant to various environmental factors, ensuring long-lasting performance in both indoor and outdoor welding applications.
Figure 1: The Goodyear Retractable Welding Hose Reel with twin oxygen and acetylene hoses.
2. Informació de seguretat
Always read and understand all instructions and safety warnings before operating this product. Failure to do so may result in serious injury or property damage.
- Ensure the reel is securely mounted to a stable surface before use.
- Verify all connections are tight and free of leaks before applying pressure.
- Do not exceed the maximum pressure rating of 300 PSI (20 BAR).
- This hose is Grade R and intended solely for acetylene use. Do not use with other gases unless explicitly stated by the manufacturer.
- Wear appropriate personal protective equipment (PPE) including welding helmet, gloves, and protective clothing when performing welding operations.
- Keep the work area clear of obstructions and flammable materials.
- Do not attempt to disassemble or repair the reel or hoses if you are not qualified. Contact a certified technician.
- Always retract the hose slowly and carefully to prevent injury or damage.
3. Llista de components i peces
The following components are included with your Goodyear Retractable Welding Hose Reel:
- Retractable Hose Reel Assembly
- Twin Oxygen (Green) and Acetylene (Red) Rubber Hoses (1/4" x 50')
- Lead-in Hose
- 9/16" Female UNF (TPI-18) Brass Fittings (pre-attached to hoses)
- 1/4" MNPT Connections
- Maquinari de muntatge (cargols, volanderes, femelles)
Figure 2: Illustration of the hose reel highlighting the 9/16" Female UNF brass fittings and 1/4" MNPT connections.
4. Configuració i instal·lació
The Goodyear Retractable Welding Hose Reel is designed for wall mounting. Choose a location that is structurally sound and can support the weight of the reel and hoses, plus any dynamic forces during operation.
4.1 Selecció de la ubicació de muntatge
- Select a wall stud or a solid concrete/masonry surface.
- Ensure adequate clearance around the reel for hose extension and retraction, and for maintenance.
- Keep the reel away from heat sources, open flames, and corrosive environments.
4.2 Passos d'instal·lació
- Position the L-shaped mounting base against the chosen surface.
- Mark the locations for the four 1/2" drilled holes using the base as a template.
- Drill pilot holes appropriate for your mounting hardware (noting the 1/2" diameter for the base).
- Securely fasten the reel to the wall using the provided mounting hardware. Ensure all bolts are tightened to prevent movement.
- Connect the lead-in hose from your gas supply to the reel's inlet connection.
- Connect your welding torch hoses to the reel's outlet connections.
- Perform a leak test on all connections before initial use.
Figure 3: The L-shaped steel mount base with groove reinforcement for stable support.
5. Instruccions de funcionament
The Goodyear Retractable Welding Hose Reel features a multi-position locking ratchet system for ease of use.
5.1 Estendre la mànega
- Grasp the hose firmly and pull it slowly to the desired length.
- You will hear a clicking sound as the ratchet engages.
- Once the desired length is reached, stop pulling. The hose will lock into position.
- If the hose does not lock, pull it out slightly further until the ratchet engages, then release.
5.2 Retracció de la mànega
- To retract the hose, pull it out gently for a short distance (approximately 6-12 inches). This will disengage the ratchet mechanism.
- Allow the hose to retract slowly and in a controlled manner. Do not let go of the hose suddenly, as this can cause rapid retraction and potential damage or injury.
- Guide the hose back onto the reel to ensure it spools evenly and prevents tangling or kinking. The auto-guide rewind system assists in neat retraction.
Figure 4: The reel's multi-position locking ratchet system and auto-guide rewind feature.
6. Manteniment
Regular maintenance will ensure the longevity and optimal performance of your hose reel.
- Neteja: Wipe down the reel and hoses regularly with a damp cloth to remove dirt, dust, and debris. Avoid harsh chemicals that may damage the hose material or powder coating.
- Inspecció de la mànega: Periodically inspect the entire length of both hoses for cuts, abrasions, bulges, or any signs of wear or damage. Pay close attention to areas near the fittings and where the hose exits the reel. Replace damaged hoses immediately.
- Fitting Inspection: Check all brass fittings for tightness and signs of corrosion or damage. Ensure the dual brass swivel joint inlet connections are functioning smoothly and are free of leaks.
- Reel Mechanism: Ensure the four non-snag rollers are clean and rotate freely to minimize hose wear. The internal spring mechanism is enclosed and generally maintenance-free, but listen for unusual noises during retraction.
- Lubricació: Lightly lubricate moving parts of the guide arm and rollers with a silicone-based lubricant if they appear stiff. Do not lubricate the internal spring mechanism.
- Emmagatzematge: When not in use for extended periods, ensure the hose is fully retracted and stored in a clean, dry environment, protected from extreme temperatures and direct sunlight.
Figure 5: The premium rubber hose is designed for superior durability and resistance to water, oil, heat, weather, and abrasion.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La mànega no es retrau completament ni suaument. | Hose is tangled or kinked inside the reel; debris obstructing the mechanism; spring tension issue. | Pull out the entire hose length and carefully guide it back in, ensuring no kinks. Clean any visible debris from the rollers and hose entry point. If the issue persists, contact customer support. |
| La mànega no es bloqueja a la longitud desitjada. | Ratchet mechanism is dirty or damaged; insufficient hose extension. | Pull the hose out slightly further until you hear a click, then release. Inspect the ratchet mechanism for obstructions. If damaged, contact customer support. |
| Gas leaks from connections. | Loose fittings; damaged O-rings or threads; incorrect connection. | Ensure all fittings are tightened securely. Inspect O-rings and threads for damage and replace if necessary. Verify correct hose connections (oxygen to oxygen, acetylene to acetylene). |
| Hose shows signs of wear or damage. | Abrasion from sharp edges; excessive pulling force; prolonged exposure to harsh conditions. | Inspect the hose regularly. Avoid dragging the hose over sharp objects. Ensure the hose is guided properly during retraction. Replace damaged hoses immediately for safety. |
8. Especificacions
| Característica | Detall |
|---|---|
| Marca | Goodyear |
| Número de model | W8081522G |
| Material | Alloy Steel (Reel), Rubber (Hose) |
| Tipus de mànega | Twin Oxygen (Green) and Acetylene (Red) |
| Dimensions de la mànega | 1/4" x 50' |
| Max Pressure Rating | 300 PSI / 20 BAR |
| Accessoris | 9/16" Female UNF (TPI-18) Brass Fittings, 1/4" MNPT Connections |
| Interval de temperatura | -40 °F a 140 °F (-40 °C a 60 °C) |
| Tipus d'instal·lació | Muntatge de paret |
| Pes de l'article | 52.9 lliures |
| Dimensions del producte (L x A x A) | 20.7 x 9.8 x 23 polzades |
Figure 6: Key specifications for the twin oxygen welding hose, including max pressure and temperature range.
9. Garantia i Suport
Goodyear products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Goodyear website. For technical support, replacement parts, or any inquiries, please contact Goodyear customer service.
Atenció al client: Refer to the contact information provided in your product packaging or on the manufacturer's official weblloc.
Devolucions: Aquest producte té dret a devolucions fàcils en 30 dies. Consulteu la política de devolucions de la vostra plataforma de compra per obtenir més informació.
