1. Producte acabatview
The Digoo DG-HOSA Smart Home Security Alarm System is a comprehensive security solution designed to protect your home. This system supports Wi-Fi, GSM, 2G, and 3G networks, offering flexible connectivity options. It features an intuitive control panel with a keypad and display, along with various wireless sensors for motion detection and door/window monitoring. The system can be controlled remotely via the "Easy security" mobile application, providing real-time alerts and management capabilities.
Figure 1.1: Complete Digoo DG-HOSA Smart Home Security Alarm System kit, including the main control panel, PIR motion detector, door/window sensors, and remote controllers.
2. Què hi ha a la caixa
En obrir el paquet, comproveu que hi hagi tots els components següents:
- 1 x Digoo DG-HOSA Home Security Alarm Host (Main Control Panel)
- 1 x Wireless PIR Detector (Passive Infrared Motion Sensor)
- 2 x comandaments a distància
- 2 x Door/Window Sensors
- 4 x Assist Installation Screws
- 4 x Wall-in Fixed Rubber Blocks
- 1 x 1M USB Power Cable (for 5V power supply)
Figure 2.1: Main control panel shown with a PIR motion detector, a door/window sensor, and a remote controller, representing key components of the system.
3. Guia de configuració
3.1 Initial Power-Up and Network Connection
- Connectar l'alimentació: Use the provided USB power cable to connect the alarm host to a 5V power source.
- Instal·lació de la targeta SIM (opcional): If using GSM/3G network, insert a compatible SIM card into the designated slot on the side of the control panel.
- Configuració Wi-Fi:
- Download the "Easy security" app from your smartphone's app store.
- Ensure your smartphone and the alarm host are connected to the same Wi-Fi network during the initial setup.
- Follow the in-app instructions to pair the alarm host with your Wi-Fi network.
Figura 3.1: lateral view of the Digoo DG-HOSA control panel, highlighting the USB power port, SIM card slot, and reset button for initial setup and connectivity.
3.2 Sensor Installation and Pairing
The system supports up to 99 sensors. Each sensor needs to be installed and paired with the main control panel.
- Detector de moviment PIR:
- Install the PIR detector in a corner or on a wall where it can cover the desired area, avoiding direct sunlight or heat sources.
- Ensure the detector is at an appropriate height (typically 2-2.2 meters) for optimal coverage.
- Pair the detector with the alarm host via the "Easy security" app or directly through the control panel's menu.
- Sensors de porta/finestra:
- Mount the two parts of the door/window sensor (magnet and main unit) on the door/window frame and the moving part, ensuring they are aligned and within 1 cm of each other when closed.
- Pair the sensors with the alarm host using the same method as the PIR detector.
- Controladors a distància:
- The remote controllers are typically pre-paired. If not, follow the pairing instructions in the app or manual.
Figure 3.2: Individual components: Wireless PIR Motion Detector (left) and Wireless Door/Window Sensor (right), essential for comprehensive home security coverage.
4. Instruccions de funcionament
4.1 Ús del tauler de control
The main control panel features a touchscreen display and a numeric keypad for direct interaction.
- Armat: Press the "ARM" button or enter your passcode followed by "ARM" to activate the alarm system.
- Desarmament: Press the "DISARM" button or enter your passcode followed by "DISARM" to deactivate the alarm system.
- Funció SOS: In an emergency, press the "SOS" button on the panel or remote controller to trigger an immediate alarm and send alerts to pre-programmed contacts.
- Configuració: Navigate through the menu using the touchscreen to adjust system settings, add/remove sensors, set up alarm zones, and configure network preferences.
Figura 4.1: Frontal view of the Digoo DG-HOSA control panel, displaying the touchscreen interface, numeric keypad, and function buttons for system control.
4.2 Mobile App Control ("Easy security")
The "Easy security" app provides full remote control and monitoring capabilities for your alarm system.
- Armament/desarmament remot: Activate or deactivate the system from anywhere with an internet connection.
- Notificacions en temps real: Receive instant push notifications for alarm events, low battery alerts, and system status changes.
- Gestió de sensors: Add, remove, or configure individual sensors and their respective defense zones.
- Call and Message Settings: Set up emergency contacts to receive calls and SMS alerts during an alarm.
- Estat del sistema: View the current status of your alarm system and connected sensors.
5. Manteniment
- Substitució de la bateria: Replace batteries in wireless sensors and remote controllers as indicated by low battery alerts on the control panel or app.
- Neteja: Gently wipe the control panel and sensors with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Actualitzacions de firmware: Periodically check for firmware updates via the "Easy security" app to ensure optimal performance and security.
- Estabilitat de la xarxa: Ensure a stable Wi-Fi and cellular network connection for reliable operation and remote access.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| System not connecting to Wi-Fi | Incorrect Wi-Fi password; Host and phone not on same network during setup; Weak Wi-Fi signal. | Verify password; Ensure both devices are on the same 2.4GHz Wi-Fi network; Move host closer to router. |
| Els sensors no activen l'alarma | Sensor not paired; Low sensor battery; Sensor placed incorrectly. | Re-pair sensor; Replace sensor battery; Adjust sensor position according to installation guidelines. |
| Sense notificacions push | App notification settings disabled; Network issues; App not running in background. | Enable notifications in app and phone settings; Check internet connection; Ensure app is allowed to run in background. |
| SOS function not calling contacts | No SIM card; Invalid SIM card; Emergency contacts not programmed correctly. | Install active SIM card; Verify SIM card balance/plan; Program emergency contacts via app or control panel. |
7. Especificacions
| Característica | Detall |
|---|---|
| Marca | DIGOO |
| Model | DIGOOWolifui253 (DG-HOSA) |
| Tecnologia de connectivitat | Wireless (Wi-Fi, GSM, 2G, 3G) |
| Font d'alimentació | Battery Powered (5V USB Power Cable included) |
| Mètode de control | App ("Easy security"), Control Panel, Remote Control |
| Dispositius compatibles | Smartphone |
| Tipus d'alerta | Audio Only, Motion Only (configurable) |
| Sensors màxims compatibles | 99 |
| Dimensions del producte (L x A x A) | 15 x 7 x 21 centímetres |
| Pes de l'article | 408 g (0.9 lliures) |
| Piles necessàries | 1 Lithium Polymer battery (for host, typically internal/rechargeable) |
| Tipus d'instal·lació | Screw-In (for mounting) |
8. Garantia i Suport
For warranty information and technical support, please refer to the official DIGOO weblloc web o poseu-vos en contacte amb el seu servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
Recursos en línia:
- Official DIGOO Weblloc: www.digoo.cc (Nota: Això és un marcador de posició URL, please refer to actual product documentation for correct support links.)
- "Easy security" App Support: Check the app's 'Help' or 'About' section for in-app support options.
