TFA-Dostmann TFA 30.5045.54 Digital Thermo-Hygrometer Instruction Manual

1. Introducció

This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your TFA-Dostmann TFA 30.5045.54 Digital Thermo-Hygrometer. This device is designed to monitor indoor temperature and humidity, featuring a clear display with comfort level indications and trend arrows. It can also function as a remote sensor for compatible TFA devices.

Les característiques clau inclouen:

• Visualització de temperatura i humitat interiors.
• Trend arrows for temperature and humidity values.
• Colored comfort zones for quick climate assessment.
• Max-Min memory function for recorded values.
• Compatibility as a remote sensor for TFA models 30.3054.10, 30.3056.10, and 30.3062.10.

2. Contingut del paquet

Si us plau, comproveu que tots els elements siguin presents i no estiguin danyats:

• TFA 30.5045.54 Digital Thermo-Hygrometer unit

Nota: 2 x 1.5V AAA batteries are required for operation and are not included in the package.

3. Dispositiu acabatview

Figura 1: Davant view of the TFA 30.5045.54 Digital Thermo-Hygrometer. The display shows current temperature (21.7°C) and humidity (39%), along with trend indicators and comfort level zones (DRY, COM, WET). Below the display are control buttons: MIN/MAX, CH/+, and SET.

Elements de visualització:

• Visualització de la temperatura: Shows current indoor temperature in Celsius. Includes a trend arrow indicating rising, stable, or falling temperature.
• Pantalla d'humitat: Shows current indoor relative humidity in percentage. Includes a trend arrow indicating rising, stable, or falling humidity.
• Comfort Zones: Colored segments (DRY, COM, WET) indicate the current humidity comfort level.
  • SEC: Humitat per sota del 45%
  • COM (Comfort): Humitat entre el 45% i el 65%
  • MÚLID: Humitat superior al 65%
• CH (Channel) Indicator: Displays the current channel when used with remote sensors.

Botons de control:

• MIN / MAX: Premeu per view minimum and maximum recorded temperature and humidity values. Press again to cycle through values. Hold to reset recorded values.
• CH/+: Used to select channels when multiple remote sensors are connected. Also used for increasing values in settings.
• SET: Used to enter settings mode or confirm selections.

4. Configuració

4.1 Instal·lació de la bateria

1. Localitzeu la tapa del compartiment de la bateria a la part posterior de la unitat.
2. Remove the cover by sliding it down or lifting it off.
3. Insert two (2) 1.5V AAA batteries, ensuring correct polarity (+ and -).
4. Substituïu la tapa del compartiment de la bateria.
5. The device will power on automatically and display current temperature and humidity.

4.2 Col·locació

The TFA 30.5045.54 Thermo-Hygrometer can be placed on a tabletop or mounted on a wall.

• Taula: Use the integrated stand on the back of the unit to place it on a flat surface.
• Muntat a la paret: Use a screw (not included) to hang the unit from the designated mounting hole on the back.

For accurate readings, place the unit away from direct sunlight, heat sources, and drafts.

5. Instruccions de funcionament

5.1 Current Readings

Upon power-on, the device immediately displays the current indoor temperature and humidity. The trend arrows next to the temperature and humidity values indicate whether the respective measurement is rising, stable, or falling over a short period.

5.2 Comfort Level Indication

The colored zones at the bottom of the display provide a quick visual reference for the indoor humidity comfort level:

• DRY (Blue): La humitat és inferior al 45%.
• COM (Green): Humidity is between 45% and 65%, indicating a comfortable range.
• WET (Orange): La humitat és superior al 65%.

5.3 Minimum and Maximum Values

A view the recorded minimum and maximum temperature and humidity values:

1. Premeu el botó MIN / MAX button once to display the maximum recorded values.
2. Premeu el botó MIN / MAX button again to display the minimum recorded values.
3. Premeu el botó MIN / MAX botó una tercera vegada per tornar a les lectures actuals.

To reset the minimum and maximum values, press and hold the MIN / MAX button for approximately 3 seconds while the MIN or MAX values are displayed. The display will flash, indicating the values have been reset.

5.4 Remote Sensor Functionality

This unit can function as an additional remote sensor for compatible TFA devices, specifically models 30.3054.10, 30.3056.10 (for temperature and humidity), and 30.3062.10 (for temperature only). Refer to the instruction manual of your main TFA device for details on pairing and channel selection. Use the CH/+ button on this unit to select the appropriate channel if necessary.

6. Manteniment

6.1 Neteja

Netegeu el dispositiu amb un suau, damp cloth. Do not use abrasive cleaning agents or solvents, as these may damage the display or casing. Avoid getting moisture into the device's internal components.

6.2 Substitució de la bateria

When the battery indicator appears on the display, replace the batteries. Follow the steps in Section 4.1 Battery Installation. Dispose of used batteries according to local regulations.

7. Solució De Problemes

8. Especificacions

• Model: 30.5045.54
• Interval de temperatura: De 0 °C a +60 °C (de 32 °F a 140 °F)
• Resolució de temperatura: 0.1 °C
• Rang d'humitat: 10% a 99% HR
• Potència: 2 piles AAA de 1.5 V (no incloses)
• Dimensions: 64 x 109 x 18 mm (2.52 x 4.29 x 0.71 polzades)
• Pes: 65 grams (2.29 unces)
• Tipus de muntatge: Taula o paret
• Fabricant: TFA Dostmann

9. Garantia i Suport

Per obtenir informació sobre la garantia o assistència tècnica, consulteu la documentació que s'inclou amb la compra o poseu-vos en contacte amb el vostre distribuïdor. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.